Quotation Are Invited For E Station Ph2 Gte5 Exhaust Plenum Repairing With Insulation Replacement Works in United Arab Emirates

Work Detail

Quotation are invited for E Station PH2 GTE5 Exhaust Plenum Repairing with Insulation Replacement Works. GTE5 EXHAUST PLENUM REPAIREXISTING EXHAUST PLENUM ARE EXTERNALLY INSULATED WITH EXTERNALCLADDING#PLATES TO PROTECT EXTERNAL SURFACES . PLENUM INTERNALS SUBJECTTO 6000C TEMPERATURE FROM GT EXHAUST FLUE GASES PASSING THROUGH IT. DUETO DETERIORATION OF INSULATION, HEA T AND FLUE GAS LEAKAGE IS OBSERVED.THIS CONTACT IS FOR REPLACEMENT OF EXISTING INSULATION AND REPAIR THEEXHAUST PLENUM DUCT AND LINE RS WHEREVER NECESSARY. THE CONTRACTOR ISEXPECTED TO VISIT THE SITE AND UNDERSTAND THE NATURE OF THE REPAIR WORK.THE CONTRACTOR SHALL MAKE A DETAILED PROPOSAL FOR THE PROPOSED REPAIRWORKS. THE REPAIR WORKS SHALL INCLUDE BELOW SCOPE OF WORKS BUT NOTLIMITED TO1.#SUPP LY OF ALL CONSUMABLES REQUIRED FOR REPLACEMENT OF EXISTINGINSULATION. THE REQUIRED CERAMIC WOOL INSULATION WILL BE PROVIDE BYDEWA.2. #SUPPLY HIGH TEMPERATURE INSULATION CLOTH.3.#SUPPLY OF ADDITIONAL NUTS, BOLTS, INSULATION LEGS AND WASHERSREQUIRED DUE TO MISSING OR DAMAGES FOR THE INSULATION #MATERIAL OFCONSTRUCTION #THE THESE ITEMS SHALL BE SIMILAR TO EXISTING MATERIAL.4.#DISMANTLING OF INSULA TION LINERS AND INSULATION AT ALL ACCESSIBLELOCATIONS. WHEREVER INSULATION CANNOT BE REMOVED DUE TO ACCESSIBILITYISSUES SAME SHALL B E MENTIONED IN THE BID/OFFER BASED PRE-BID SITEINSPECTION5.#THE EXTERNAL CLADDING (LINER PLATES) REMOVED HAS TO BE RE-USED ANDHENCE SHALL BE CAREFULLY REMOVED.6.#LINER PLATES REQUIRED FOR REPAIR OF DAMAGED CLADDING WILL BESUPPLIED BY DEWA FREE OF COST7.#THE INSULA TION REMOVED SHALL BE PACKED IN DISPOSABLE BAGS AND SHALLBE KEPT IN PLACE SHOWN BY DEWA ENGINEER FOR FURTHER DISPOSAL BY DEWA8.#INSP ECT PLENUM INTERNAL DUCT AND CRACKS, MISALIGNMENT ETC AND REPAIRIT BASED ON JOINT INSPECTION AND DISCUSSION WITH DEWA ENGINEER.9.#FL EX SEALS REPLACEMENT REPAIR OR REPLACEMENT IF REQUIRED WILL BEDONE BY DEWA. CONTRACTOR SHALL PROVIDE ALL MANPOWER SUPPORTS ASNECESSA RY.10.#REPLACE GASKETS OF PLENUM FLANGES USING HIGH TEMPERATURE GASKETSAND TIGHTEN THE FLANGE BOLTS INCLUDING PROVIDING NEW BOLTS IF FOUNDMISSING.11.#MISSING BOLTS IF ANY OF PLENUM JOINTS SHALL HORIZONTAL, VERTICALAND CIRCUMFERENTIAL JOINTS SHALL BE PROVIDED. THE JOINTS SHALL BEINTERNALLY SEAL WELDED.12.#RE-INSULATE THE COMPLETE PLENUM WITH 128KG/M3 DENSITY BIO-SOLUBLEFIBER FOR THE SAME THICKN ESS AS IN THE EXISTING INSULATION13.#THE INSULATION MATTRESSES #SHALL BE SANDWICHED BETWEEN HIGHTEMPERATURE RESISTANT INSULATION FAB RIC ( SUITABLE FOR TEMPERATURE UP TO6000C).14.#RE-INSTALL LINERS INCLUDING REPAIR OF DEFECTIVE LINERS AS ENQUIRED.TACK WELD MOUNTING BOLTS NUTS.15.#CHECK BOTTOM SUPPORTS OF PLENUM AND CORRECT AS NECESSARY. Qty: 1 EStation PH2 GTE5 Exhaust Plenum Repairing with Insulation Replacement Works FOR FURTHER DETAILS PLEASE CONTACT ASM MYNUDDIN (0503620814) MYNUDDIN.HOSSAIN@DEWA.GOV.AE /MARWAN AL MHEIRI (0501136322) (MARWAN.ALM HEIRI@DEWA.GOV.AE) STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2332500599)/$value

Contact Information