Bids Are Invited For Selection Of Proposals For Pricing Registration Aimed At Providing Public Lighting Lumi ... in Brazil

Work Detail

Led (Light Emiting Diode) Public Lighting L Maximum Power Of 100 W; Minimum Luminous Efficiency Of 130 Lm/W; Minimum Luminous Flow Of 13,000 Lumens; 5,000 K Color Temperature; Irc & Gt Minimum Color Playback Index; 70; Lamina Life Life Of At Least 50,000 Hours L70 Result Obtained According To Iesna Lm 80 Standard; Energy Efficiency: Class A; Aluminum Alloy Luminaire Body Injected At High Pressure Sae 305, Electrostatic Painting In The Color Of Gray Munsell N6, 5; Transparent Tempered Plan Diffuser; Ik08 Minimum Impact Resistance; Include Connecting Cables And 7 (Seven) Pins Default Pins Ansi C 136.41, For Photoelectric Relay/Telegenest With Shorting Cap; Installation On Arm Tip And Top Of 48, 3Mm To 60, 3Mm Outdoor Diameter; The Screws, Nuts, Washers And Other Components Used For Fixing Should Be In Stainless Steel; Ip 66 Degree Of Protection For The Optical Body And Accommodation Of Auxiliary Equipment; Constant Current Driver Incorporated Internally Into The Luminaire With Possibility Of Dimenization Protocol 0-10V Or There; Nominal Voltage 90 To 305Vac - 50/60Hz; Power Factor & Gt; 0.95; Use Temperature -5 ° C And 45 ° C; 10Kv/10K Voltage Protection Device; Electric Shock Protection; The Driver Shall Have Harmonic Distortion Of The Current According To Iec 61,000-3-2, Has An Efficiency Greater Than Or Equal To 90% And Has A Degree Of Protection Against Dust Penetration And Water Equal To Ip 67; The Power Current Provided By The Driver Should Not Exceed The Nominal Led Current To 100% Of Its Luminous Flow; Dielectric Stiffness: The Luminaire Must Resist A Voltage Of At Least 1460 V (Class I), In Accordance With Nbr 15129 And Nbr Iec 60598-1; Leds Should Be Of High Efficiency, Greater Than 130 Lm/W, With Smd Assembly; The Photometry Of The Luminaire Should Be Rehearsed And Certified According To The Ies Lm-79-08 Standard; The Led Must Be Rehearsed And Certified According To The Ies Lm-80-08 Standard; The Lamp Should, Led (Light Emitting Diode) Technology L Maximum Power Of 120 W; Minimum Luminous Efficiency Of 130 Lm/W; Minimum Luminous Flow Of 15,600 Lumens; 5,000 K Color Temperature; Irc & Gt Minimum Color Playback Index; 70; Lamina Life Life Of At Least 50,000 Hours L70 Result Obtained According To Iesna Lm 80 Standard; Energy Efficiency: Class A; Body Of The High Pressure Injected Aluminum Alloy Lamp Sae 305, In Accordance With Nbr 15129 And Nbr Iec 60598-1; Leds Should Be High Efficiency, Smd Assembly; The Photometry Of The Luminaire Should Be Rehearsed And Certified According To The Ies Lm-79-08 Standard; The Led Must Be Rehearsed And Certified According To The Ies Lm-80-08 Standard; The Luminaire Should S, Led (Light Emitting Diode) Public Lighting L Maximum Power Of 180 W; Minimum Luminous Efficiency Of 130 Lm/W; Minimum Luminous Flow Of 23,400 Lumens; 5,000 K Color Temperature; Irc & Gt Minimum Color Playback Index; 70; Lamina Life Life Of At Least 50,000 Hours L70 Result Obtained According To Iesna Lm 80 Standard; Energy Efficiency: Class A; High Pressure Injected Aluminum Alloy Luminaire Body Sae 305, Washers And Other Components Used For Fixing Should Be In Stainless Steel; Ip 66 Degree Of Protection For The Optical Body And Accommodation Of Auxiliary Equipment; Constant Current Driver

Contact Information