Tender For 11 Kv Independent Feeder Construction Work Under Nagar Nikay Under Ee, Edd, Fatehpur Barabanki - ... in India

Work Detail

Tender For 11 Kv Independent Feeder Construction Work Under Nagar Nikay Under Ee, Edd, Fatehpur Barabanki - Safe loading, carriage including unloading and proper stacking of following materials from Central Store Barabanki / JE Store to site of work. 2 ST Pole 11 Meter Long 3 Pcc Pole 8.5 Meter Long 4 Top Channel 5 T-off Channel 6 Dropper Channel 7 11 KV DISC INSULATOR WITH FITTING 8 11 KV PIN INSULATOR polymeric 9 Stay Set Complete 10 ACSR Rabbit Conductor 11 Earthing Set 12 Loop Insulator 13 11 KV X-arm 14 Holding Clamp for xarm 15 M.S Angle Iron 65x65x6mm Bracing with 4 Clamp 16 3x300 XLPE 11 KV Cable 17 O/D 3x300 XLPE 11 KV Jointing 18 3x120 XLPE 11 KV Cable 19 O/D 3x120 XLPE 11 KV Jointing 20 STH 3x120 21 250 Kva T/F 22 S/S Base Angle 23 3x120 Sqmm ABC 24 11 KV VCB I/C CTR 600/300/5A 350 MVA, 24 Volt 25 11 KV VCB For O/G CTR 200/100/5A 26 3 Phase DB BOX 27 Dragging of pole from JE Dump Store to site 28 Grouting of STP Pole 29 Erection of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7/8 SWG, nuzzling & Grouting. 30 Installation of Mounting of Following capacityof Transformer including its connection between 11 KV and LT Line mountingprovinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor) 31 Mounting of 250 KVA Tranformer 32 Stringing and sagging of 11 KV line with ACSR Rabbit Conductor including nuzzling binding and jumpering (Rabbit conductor will be provided by the department) 33 Errectionof Substation type double pole with ST/PCCincluding mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt 33/11 KV line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 KV pin & Pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of Size 300x300x75 MM. 34 Errectionof singlePCC /ST Pole for Stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 35 Stringing and sagging of 3x120 Sqmm ABC ABC Cable will be provided by the department) 36 Laying of 11 KV XLPE CABLE 3x300+3x120 Sq. MM (XLPE Cable will be provided by the department) 37 Earthing of pole with MS Earthing. 38 Concreating and pilinthing of ST& PCCPole 18x24 CM. 39 Fabricate with hole suitable size in steel items, receive from central store lightas top channel/dropper channel sub station base angle etc. 40 Provinding & Fixing of various type materials. All materials shall be supplied by the contractor. 41 Piercing Clamp 42 Dead End Clamp 43 Nut & Bolt 44 F-Bracket 45 Copper lead 70 sqmm for DB Box 46 CLAMP FOR TOP, T-OFF, DROP 47 DANGER BOARD 48 G.I. BARBED WIRE 49 GI Pipe 6" Dia 50 J-Hook 51 Wiremesh fencing of 11/0.4 KV substation shall be made rectangular off size as per site requirement not exceeding 3 meter fabrication 45x45x5mm angle. material shall be supplied by the contractor. 52 Construction of massionary type transformer plinth of Suitable sizewith brick ,cement, coarse sand , sand & brick ballast. Filling of sand in the hollow space , plastering , outer surface in ration 1:4:6 top of the plinth 4" thickness grouting of 2 nos MS Channel of size 100x50x2000 mm on the top of the plinth for placement of transformer . All material shall be supplied by the contractor. 53 Earthing of T/F Pipe type with 40 fit deep borring and providing GI Pipe 1.5" dia (60 fit GI Pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece, nut & bolts and GI Pipe Cap. All material shall be supplied by the contractor. 54 Tailless Unit Complete

Contact Information