Tender For Miscellaneous Works At 25 Nos. Ayush Centers In District Chittorgarh - Earth Work In Excavation B ... in India

Work Detail

Tender For Miscellaneous Works At 25 Nos. Ayush Centers In District Chittorgarh - Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils 121.50 Cum. 178.00 21627.00 2 3.1.6 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 20.25 Cum 3302.00 66865.50 3 6.1.6 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). 64.80 Cum. 2838.00 183902.40 4 6.2 Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in : 6.2.6 Cement Mortar 1:6 ( 1-Cement : 6-Sand). 102.60 Cum. 3479.00 356945.40 5 4.1 Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix 12.15 Cum 4934.00 59948.10 6 4.9 Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. 27.00 Sqm. 157.00 4239.00 7 11.26 Random rubble dry stone Kharanja under floor. 54.00 Cum. 932.00 50328.00 8 3.1.4 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). 32.40 Cum 3847.00 124642.80 9 4.2 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix 3.24 Cum 5609.00 18173.16 10 4.3 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix 12.96 Cum 5185.00 67197.60 Unit-Udaipur Rajasthan Urban Drinking Water Sewerage & Infrastructure Corporation Limited G-Schedule Name of Work- Miscellaneous Works at 25 Nos. Ayush Centers in District -Chittorgarh. Based on PWD BSR 2022 (Civil & Sanitary),2022 Jaipur (Electrical) S.No. BSR Item no. Particulars Qty Unit Rate Amount 11 4.13.3 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Thermomechanically Treated bars (Conforming of relevent IS code) 222.55 Kg. 77.00 17136.35 12 4.10.2 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. 48.60 Sqm. 340.00 16524.00 a 4.10.3 Columns, pillars, posts and struts etc. 48.60 Sqm. 375.00 18225.00 13 5.2.2 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) 41.40 Cum. 4990.00 206586.00 14 5.8.2 Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) 180.00 Sqm. 553.00 99540.00 15 17.35 Providing and Fixing Chiken wire mesh at the joint of masonry members/ R.C.C. Members with Nails complete in all respect. 500.00 Sqm 77.00 38500.00 16 12.3.2 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :: 20 mm thick. 4500.00 Sqm. 190.00 855000.00 17 12.5 6mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) 1350.00 Sqm. 139.00 187650.00 18 12.22.1 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) 4500.00 sqm 84.00 378000.00 19 12.46.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 252.00 Sqm. 69.00 17388.00 20 12.40.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 4500.00 Sqm. 80.00 360000.00 12.40.2 Old work (One or more coats ) 4500.00 Sqm 40.00 180000.00 21 12.43 Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision 12.43.1 New 4475.00 sqm 123.00 550425.00 12.43.2 Old Work 3750.00 Sqm 50.00 187500.00 22 9.19 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : a 9.19.4 Partly fixed and partly openable [ fixed area not to exceed 33%] 67.50 Sqm. 3090.00 208575.00 23 9.26 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 54.00 Sqm. 617.00 33318.00 S.No. BSR Item no. Particulars Qty Unit Rate Amount 24 9.27 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. 520.79 Kg. 65.00 33851.35 25 9.5 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 300.00 Kg. 83.00 24900.00 26 7.13 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 80.00 Sqm. 748.00 59840.00 27 7.12 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 300.00 Sqm. 674.00 202200.00 28 7.25.1 P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. 600x600mm 500.00 Sqm. 1041.00 520500.00 29 10.17.1 Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 18.00 Cum 4483.00 80694.00 30 10.22 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 225.00 Mtr. 111.00 24975.00 31 11.13.1 Providing and fixing 20 mm thick precast terrazo tiles of approved make, with marble chips of size upto 6mm laid over roof with neat cement slurry mixed with pigment to match the shade of the tiles, including cutting ,grinding rubbing with machine complete on 20 mm thick bed of cement sand mortar 1 : 4.Light shade using white cement 180.00 Sqm 542.00 97560.00 32 3.8 Providing & fixing precast cement concrete coping 1: 2:4 mix 50mm thick complete as per specification 135.00 Sqm 367.00 49545.00 33 8.13 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 8.13.2 30 mm thick . 8.13.2. 1 Commercial Veneer both side 42.00 Sqm. 1841.00 77322.00 34 8.14 Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. 42.00 Sqm 141.00 5922.00 S.No. BSR Item no. Particulars Qty Unit Rate Amount 35 15.29 Providing and Applying ACRYLIC emulsion polymer waterproofing chemical coating, on over roof on over roof slabs/terrace/balconies/parapet wall etc.with following method/ specification: Paint the surface with regular paint brush so as to obtain approximately 0.3mm thickness coating. apply the 2nd coat next day at right angles to the 1st coat so that total thickness of the coating should be approximately 0.6mm coverage by using above formulation will be 40 ft2/ litre of chemical. painted surface does not require any external water curing since chemical will hold sufficient water for curing.After the primer coat Apply 2 coats of modified acrylic emulsion polymer water proofing compound having solar heat reduction properties coating @ 0.330 KG/SQM on the surface of the interval of 3-4 hours. Undulation on the surface is repair before the waterproofing work. 384.00 Sqm 526.00 201984.00 36 12.66 Providing and applying P.U. paint of apporved brand and manufature to even shade. Two or more coats on New works. 864.00 Sqm 304.00 262656.00 37 12.68 Lining work on Yellow & Pink Exterior Paint/ Colour wash including making Gola, Gardana, Kangoora and Orgnamental lining work as per approved style and pattern complete in all respect with Exterior (White/Brown) paint as required complete in all respect as per direction givin by Engineer in charge. 1500.00 Sqm 43.00 64500.00 38 13.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 450.00 Sqm 235.00 105750.00 Part-B (Sanitary Work) 39 1.2 P & F Indian type white glazed vitreous china 1 st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: 1.2.1 Size 530x410mm. 9.00 Each 2640.00 23760.00 40 1.3 P & F European type white glazed vitreous china 1 st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 9.00 Each 2420.00 21780.00 41 1.7 P & F water closet Seat Covers with brass hinges complete : 1.7.2 -do- White. 9.00 Each 485.00 4365.00 42 1.14 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. 1.14.2 Flat Back (large) or half stall size 610x400x80mm. 9.00 Each 4637.00 41733.00 43 1.16 P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. 1.16.3 Makrana `Adanga` or Raj Nagar 1 St Quality White or Andhi IndoItalian marble. 9.00 Each 801.00 7209.00 44 1.2 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall: 1.20.3 PVC with PVC bend and superior internal fittings as per IS : 7231 . 18.00 Each 1645.00 29610.00 45 1.29.1 P & F C.P. brass Urinal Spreader for stall urinal of approved make. 9.00 Each 363.00 3267.00 46 1.36 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : 1.36.1 Size 450 mm x 300 mm 18.00 Each 2268.00 40824.00 47 1.43 P& F waste Pipe with all fitting 1.43.4 G.I(B class) 32mm 36.00 Each 224.00 8064.00 48 1.48 P & F Grating of approved quality/make: a 1.48.1 Stainless Steel Sheet size 125mm dia. 54.00 Each 62.00 3348.00 49 2.13 P & F 15 mm. Dia Connection Pipe of approved quality/make : S.No. BSR Item no. Particulars Qty Unit Rate Amount 2.13.4 PVC pipe with C.P. Brass nuts upto length, 600mm. 54.00 Each 116.00 6264.00 50 2.33 Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge a 2.33.2 Swan neck pillar cock 15 mm nominal size 9.00 Each 1580.00 14220.00 b 2.33.3 Bib Cock with long thread 15 mm nominal size 36.00 Each 823.00 29628.00 c 2.33.4 Long body Bib Cock 15 mm nominal size 18.00 Each 1084.00 19512.00 d 2.33.6 Angular stop cock with long thread 15 mm nominal size 9.00 Each 762.00 6858.00 51 1.56 P & F Extension Pipe for bib cocks of approved quality/make. 27.00 a 1.56.3 C.P. brass of Heavy & Superior quality 150x15m 9.00 Each 168.00 1512.00 52 1.6 Providing & fixing C.P.flange for 15mm dia taps. 90.00 Each 18.00 1620.00 53 2.38 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) a 2.38.1 15mm nominal outer dia pipe 45.00 Mtr. 279.00 12555.00 54 2.39 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). a 2.39.1 15 mm nominal outer dia pipes 45.00 Rm 167.00 7515.00 b 2.39.3 25 mm nominal outer dia pipes 45.00 Rm 262.00 11790.00 55 2.11 P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : 2.11.3 (-do-) wt.Not less than 600 gm, 25mm. 9.00 Each 440.00 3960.00 56 2.15 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : a 2.15.1 Gun-metal 15mm nominal bore. 9.00 Each 227.00 2043.00 b 2.15.3 Gun-metal 25 mm nominal bore. 9.00 Each 529.00 4761.00 57 2.26 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 2.26.5 500 (-do-) 9.00 Each 3920.00 35280.00 58 2.27 Hoisting Charges for each floor : 2.27.2 For items 2.26.5 to 2.26.8 9.00 Each 157.00 1413.00 59 3.16 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. a 3.16.3 110 mm dia 162.00 Mtr. 282.00 45684.00 3.16.4 160 mm dia 162.00 Mtr 463.00 75006.00 60 3.17 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: a 3.17.1 Coupler (socket) (ii) 110mm dia 36.00 Each 108.00 3888.00 (iii) 160 mm dia 36.00 Each 119.00 4284.00 b 3.17.9 Bend 87 .5 (ii) 110mm dia 36.00 Each 161.00 5796.00 (iii) 160 mm dia 36.00 Each 177.00 6372.00 c 3.17.3 Plain Tee (ii) 110mm dia 36.00 Each 187.00 6732.00 (iii) 160 mm dia 36.00 Each 205.00 7380.00 d 3.17.15 Pipe clip (ii) 110mm dia 90.00 Each 36.00 3240.00 61 3.16.5 Providing & Laying C.C. 1:3:6 (Stone Agreegate 20mm nominal size) all around PVC Pipe including 7.5 cm thick bed concerte [Width & Height = Dia of Pipe in CM+15CM] excluding cost of Pipe & Excavation of trenches etc. S.No. BSR Item no. Particulars Qty Unit Rate Amount a 3.16.5. 1 PVC pipe 110 mm dia 90.00 Mtr. 325.00 29250.00 b 3.16.5. 2 PVC pipe 160 mm dia 90.00 Mtr. 425.00 38250.00 62 3.21 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. 3.21.2+ 3.21.2. 1 Inside size 450 x 450mm depth upto 0.5 M Cement cover with frame. Deduct for using brick work 230 mm thick in place of 300 mm thick stone masonry 18.00 Each 1824.00 32832.00 63 3.44.2 Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110mm dia 162.00 Mtr. 336.00 54432.00 64 3.45 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make a 3.45.1 Coupler (ii) 110mm dia 36.00 Each 108.00 3888.00 b 3.45.4 Bend 87.5 Dg. (ii) 110mm dia 36.00 Each 155.00 5580.00 c 6.45.16 Single Tee (ii) 110mm dia 36.00 Each 210.00 7560.00 d 3.45.24 Gully Trap 110mm dia 18.00 Each 685.00 12330.00 e 3.45.25 Nahni Trap with Jali 4” 110mm dia 36.00 Each 171.00 6156.00 f 3.45.30 Vent Cowel 110mm dia 18.00 Each 59.00 1062.00 Part-C (Electrical Work) 65 1.1 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR a 1.1.1 Short point (up to 3 mtr.) 100.00 Mtr. 359.00 35900.00 b 1.1.2 Medium point (up to 6 mtr.) 60.00 Mtr. 578.00 34680.00 c 1.1.3 Long point (up to 10 mtr.) 30.00 Mtr. 772.00 23160.00 S.No. BSR Item no. Particulars Qty Unit Rate Amount 66 4.1 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR a 4.1.1 1 x 1.5 sq.mm 500.00 Mtr. 22.00 11000.00 b 4.1.5 1 x 2.5 sq.mm 500.00 Mtr. 31.00 15500.00 c 4.1.10 1 x 4.0 sq.mm 500.00 Mtr. 48.00 24000.00 d 4.1.15 1 x 6.0 sq.mm 500.00 Mtr. 71.00 35500.00 67 6.1 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR a 6.1.1 Single pole MCB (With B/C curve tripping Characteristics) 6.1.1.2 6 A to 32 A rating 110.00 Each 187.00 20570.00 b 6.1.5 Triple pole MCB (With D curve tripping Characteristics) 6.1.5.2 6 A to 32 A rating 30.00 Each 947.00 28410.00 68 6.1 Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 6.10.3 Metal door (Three phase) IK-09 and IP-43 with Metal end box a 6.10.3. 3 8 Way 10.00 Each 5980.00 59800.00 b 6.10.3. 4 12 Way 10.00 Each 8852.00 88520.00 69 7.27 Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) with CM/L no. printed and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating ,minimum width of switch toggle( PUSH PART ) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR S.No. BSR Item no. Particulars Qty Unit Rate Amount a 7.27.1 10 A one way switch 30.00 Each 55.00 1650.00 b 7.27.4 16 A one way switch With Led Indicator 20.00 Each 113.00 2260.00 70 7.28 Providing & Fixing of modular type lockable feature socket duly made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR a 7.28.1 6 A 3/5 pin shuttered socket 50.00 Each 107.00 5350.00 b 7.28.2 6/16 A shuttered socket 50.00 Each 176.00 8800.00 71 7.31 Providing & Fixing of following size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . a 7.31.2 3 Module 30.00 Each 86.00 2580.00 b 7.31.6 8 Module 40.00 Each 155.00 6200.00 c 7.31.8 12 Module 40.00 Each 214.00 8560.00 72 7.33 Providing & Fixing of Wiring Accessories OEM fabricated following size virgin material UPVC modular boxes on surface suitable for modular accessories as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . a 7.33.1 1-2-3 Module 30.00 Each 98.00 2940.00 b 7.33.3 6-8 Module 40.00 Each 216.00 8640.00 c 7.33.4 10-12 Module 40.00 Each 287.00 11480.00 73 17.1 Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . a 17.1.1 1170mm(+/-10%) LED batten with min. lumen output 2200 lm 100.00 Each 492.00 49200.00

Contact Information