|
Expenditure For Purchase Of Tubewell Materials For Repair And maintenance And Wage Cost At All Sansad Under Dahapara Gp-(a) Original Works 1 Supplying,fitting and fixing brass ferrule including connection with G. pipes of TATA make of following dia. and upto 450 mm long with screw,jamnut,sockets etc.,complete in all respect, including cutting trenches in all sorts of soil and filling up the trenches as per direction of the Engineer - in - Charge. (i) 25 mm dia. (ii) 20 mm dia. (iii) 15 mm dia. (iv) 10 mm dia. 2 Supplying, fitting and fixing brass ferrule including connection with P.V.C. pipe of approved make upto 450 mm long with plumbing joint,brass over C.P. coupling at both ends, with cap and lining complete in all respect, including cutting trenches in all sorts of soil and filling up trenches as per direction of the Engineer-in-charge. (i) 25 mm dia. (ii) 20 mm dia. (iii) 15 mm dia. (iv) 10 mm dia. (b) REPAIR WORKS 1 Renewing brass ferrule for connecting mains. (i) 25 mm dia. (ii) 20 mm dia. (iii) 15 mm dia. (iv) 10 mm dia. 2 Dismantling ferrule with all pipe connections. 3 Dismantling existing ferrule with fittings and refixing same after cleaning. 1 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work (a) (i) 15 mm dia. light quality (ii) 15 mm dia. medium quality (b) (i) 20 mm dia. light quality (ii) 20 mm dia. medium quality (c) (i) 25 mm dia. light quality (ii) 25 mm dia. medium quality (d) (i) 32 mm dia. light quality (ii) 32 mm dia. medium quality (e) (i) 40 mm dia. light quality (ii) 40 mm dia. medium quality (f) (i) 50 mm dia. light quality (ii) 50 mm dia. medium quality (g) (i) 65 mm dia. light quality (ii) 65 mm dia. medium quality (h) (i) 80 mm dia. light quality (ii) 80 mm dia. medium quality (i) (i) 100 mm dia. medium quality (ii) 100 mm dia. heavy quality (j) (i) 125 mm dia. medium quality (ii) 125 mm dia. heavy quality (k) (i) 150 mm dia. medium quality (ii) 150 mm dia. heavy quality (B) For Concealed Work (a) 15 mm dia. medium quality (b) 20 mm dia. medium quality (c) 25 mm dia. medium quality 2 Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately) (i) 15 mm dia. medium quality (ii) 20 mm dia. medium quality (iii) 25 mm dia. medium quality (iv) 32 mm dia. medium quality (v) 40 mm dia. medium quality (vi) 50 mm dia. medium quality (vii) 65 mm dia. medium quality (viii) 80 mm dia. medium quality (ix) 100 mm dia. medium quality (x) 125 mm dia. medium quality (xi) 150 mm dia. medium quality 3 Supplying, fitting and fixing shower of approved brand and make. (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). (ii) Chromium plated round shower with revolving joint (Equivalent to Code No. 541(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). (iii) Chromium plated shower arm 240 mm long (Equivalent to Code No. 536(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). (b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand). (c) Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model - Tropical / Sumthing Special of ESSCO or similar). (d) Chromium plated Hand shower with Flexible Tube & fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar).). (e) Chromium plated double coat Hook(Equivalent to Code No. 35761 & Model - KUBIX of Jaquar or similar). (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). (g) PTMT overhead shower ( Prayag or equivalent) (i) 75 mm round (ii) 150 mm round (h) Polythene overhead shower of approved make 15 mm X 125 mm (i) (1) Chromium plated overhead Rain shower (Square), size-180x180mm with revolving joint (Model Code No. F7010501 of CERA or equivalent) (i) (2) Chromium plated overhead Rain shower (Round), size-200mm dia. with revolving joint (Model Code No. F7010601 of CERA or equivalent) (Note: Item 3(b, d, e & f) to be done as per specific direction of the Superintending Engineer) Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (i) 100 mm dia (ii) 80 mm dia (iii) 65 mm dia (iv) 50 mm dia (v) 40 mm dia (vi) 32 mm dia (vii) 25 mm dia (viii) 20 mm dia (ix) 15 mm dia Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (i) 100 mm dia (ii) 80 mm dia (iii) 65 mm dia (iv) 50 mm dia (v) 40 mm dia (vi) 32 mm dia (vii) 25 mm dia (viii) 20 mm dia (ix) 15 mm dia Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 35 kg per sq. cm. (for gas line only). (i) 100 mm dia (ii) 80 mm dia (iii) 65 mm dia (iv) 50 mm dia (v) 40 mm dia (vi) 32 mm dia (vii) 25 mm dia (viii) 20 mm dia (ix) 15 mm dia Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). (ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand) (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand). (ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). (c) (i) Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand). (ii) Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model - Florentine of Jaquar or similar brand). (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). (ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand). (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm (f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent) 15 mm (ii) Polythene Bib Cock / Stop Cock with plastic inlet (EMCO / ATLAS or equivalent) 15 mm (g) Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. (i) 15 mm (ii) 20 mm (iii) 25 mm (h) Supplying, fitting and fixing of Chromium plated Turn type single lever concealed Diverter with lever, tip ton knob and flange of approved brand and make. (h) (i) Exposed Part:- (Model Code No.F2004703 of CERA or equivalent) (h) (ii) Concealed Part:- (Model Code No. F4010105 of CERA or equivalent) (Note: Item 7c(i), (ii) & 7d (i), (ii) to be done as per specific direction of the Superintending Engineer.) Supplying, fitting and fixing push cock of heavy quality and of approved make and brand. (a) Cast iron (i) 15 mm (ii) 20 mm (b) Cast iron with brass spindle (i) 15 mm (ii) 20 mm (c) (i) PTMT Push Cock (20 mm F/T) with spout ( Prayag or equivalent) (ii) PTMT Push Cock with reducer 15x20 mm ( Prayag or equivalent) (iii) PTMT Push Cock 15 mm (Female thread) ( Prayag or equivalent) (iv) PTMT Push Cock 15 mm with spout ( Prayag or equivalent) (d) Polythene (i) 15 mm (ii) 20 mm 9 C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. (i) 50 mm (ii) 80 mm (iii) 100mm (iv) 125mm (v) 150 mm (vi) 200 mm (vii) 250 mm (viii) 300 mm 10 Sluice valve chamber with C.I. heavy cover with locking arrangement, (weight not less than 25 kg) (size of chamber 450 mm X 600 mm inside upto 900 mm depth) 250 mm thick cement brick walls (6:1), 150 mm thick cement concrete (6:3:1) bed with stone chips, 20 mm thick cement plaster (6:1) for inside wall and 15 mm thick cement plaster (4:1) for outer walls including rounding corners. 11 Supplying, fitting and fixing C.I. tail pieces in pair conforming to I.S. specifications. (i) 100 mm (ii) 80 mm 12 Supplying, fitting and fixing cast iron spun pipe conforming to I.S. 1536/1976 with all necessary specials including cutting trenches in any soil or through masonry, concrete etc., if necessary,and mending good all damages including jointing pipes with Tyton joints as per manufacturer's specifications and filling up the trenches all complete but excluding the cost of masonry or concrete work, if required. (a) Class A: (i) 80 mm nominal dia. (ii) 100 mm nominal dia. (iii) 125 mm nominal dia. (iv) 150 mm nominal dia. (v) 200 mm nominal dia. (vi) 250 mm nominal dia. (vii) 300 mm nominal dia. (b) Class B: (i) 80 mm nominal dia. (ii) 100 mm nominal dia. (iii) 125 mm nominal dia. (iv) 150 mm nominal dia. (v) 200 mm nominal dia. (vi) 250 mm nominal dia. (vii) 300 mm nominal dia. (c) Class LA: (i) 80 mm nominal dia. (ii) 100 mm nominal dia. (iii) 125 mm nominal dia. (iv) 150 mm nominal dia. (v) 200 mm nominal dia. (vi) 250 mm nominal dia. (vii) 300 mm nominal dia. Renewing specials only of cast iron spun pipe conforming to I.S. 1536/1976 including cutting trenches in any soil or through masonry, concrete etc., if necessary and mending good damages including jointing with Tyton joints as per manufacturer's specifications excluding the cost of concrete or masonry work, if required, but including the cost of filling up trenches (for all dia. specials, payment will be made on the basis of actual weight of the specials). Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips (4:2:1) and cement plaster (6:1) to match and curing complete in all respect. (i) 15 mm (ii) 20 mm (iii) 25mm (iv) 32mm (v) 40 mm (vi) 50 mm (vii) 65 mm (viii) 80 mm (ix) 100 mm Supplying, fitting and fixing self closing C.P. water tap of approved brand and make - 15 mm dia. Supplying, fitting and fixing G.I. gravity operated water tap for public use with pilfer proof arrangement of approved brand and make. (i) 15 mm dia. (ii) 20 mm dia. Supplying,fitting and fixing steel reducing bush. (i) 20 mm X 15 mm and below (ii) 25 mm X 20 mm and below (iii) 15 mm X 10 mm and below (iv) 32 mm X 25 mm (v) 40 mm X 32 mm (vi) 50 mm X 40 mm Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for above ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. ) (A)Above Ground (i) 15 mm dia. (ii) 20mm dia. (iii) 25 mm dia. (iv) 32 mm dia. (v) 40 mm dia. (vi) 50 mm dia. (vii) 65 mm dia. (viii) 75 mm dia. / 80 mm dia. (ix) 100 mm dia. / 110 mm dia. (x) 140 mm dia. (xi) 160 mm dia. (B)Under Ground (i) 15 mm dia. (ii) 20mm dia. (iii) 25 mm dia. (iv) 32 mm dia. (v) 40 mm dia. (vi) 50 mm dia. (vii) 65 mm dia. (viii) 75 mm dia. / 80 mm dia. (ix) 100 mm dia. / 110 mm dia. (x) 140 mm dia. (xi) 160 mm dia. Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm (b) For Concealed Work (Dia) 15 mm 20 mm 25 mm Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC Pipes (Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes (Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm B) Socket Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm C) Elbow Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm D) Long Bend (90 Degree) Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm (E) Tee (Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm (F) (i) Nipple (75 mm long) (Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm (ii) Nipple (100 mm long) (Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm iii) Nipple (150 mm long) Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm iv) Nipple (200 mm long) Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm v) Nipple (300 mm long) Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm G) Flange Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm (H) Threaded Adopter (Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm 200 mm (I) Union (Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm (J) Threaded End Cap (Dia) 15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm (K) End Plug (Dia) 100 mm 125 mm 150 mm 200 mm 250 mm (L) Reducing Socket (mm X mm) 20 X 15 25 X 15 25 X 20 32 X 25 40 X 25 40 X 32 50 X 25 50 X40 65 X 40 65 X 50 80 X 40 80 X 50 80 X 65 100 X 40 100 X 50 100 X 80 125 X 50 125 X 80 125 X 100 150 X 50 150 X 80 150 X 100 150 X 125 (M) Reducing Tee (mm X mm) 20 X 15 25 X 15 25 X 20 40 X 15 40 X 20 40 X 25 40 X 32 50 X 15 50 X 25 50 X 32 65 X 25 65 X 40 65 X 50 80 X 25 100 X 32 100 X 65 (N) Reducing Elbow (mm X mm) 25 X 15 25 X 20 80 X 50 (O) Solvent Cement 250 Gm. Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63] A. 6 Kg / Sq.Cm. (Working Pressure) (Dia) 40 mm 50 mm 63 mm 75 mm 110 mm B. 10 Kg / Sq.Cm. (Working Pressure) (Dia) 15 mm 20 mm 25 mm 32 mm Supply, Fitting & Fixing 3 layer PP-R (Poly-propylene Random Copolymer) U.V STABILISED and anti-microbial fusion welded pipes conforming to IS:15801-2008.for hot & cold water supply including necessary fittings and joining materials as required complete as per direction of Engineer-in-charge. (Payment will be made on the centre line measurement of the total pipe line including all specials. No seperate payment will be made for accessories, specials etc.) A. For Exposed Work I)SDR 7.4/PN-16 Pipes 20 mm (outer dia ) 25 mm ( outer dia ) 32 mm ( outer dia ) 40 mm ( outer dia ) II)SDR 11/PN-10 Pipes 50 mm ( outer dia ) 63 mm ( outer dia ) 75 mm ( outer dia ) 90 mm ( outer dia ) 110 mm ( outer dia ) B. For Concealed Work I)SDR 7.4/PN-16 Pipes 20 mm (outer dia ) 25 mm ( outer dia ) 32 mm ( outer dia ) 22 Supply ,Fitting & Fixing of PVC Bottle waste tap i) 32 mm ii) 40 mm 23 Supply, Fitting & Fixing of 32 mm PVC Waste Nozzle with jamnut, full thread or half thread complete. 24 Supply, Fitting & Fixing of 40 mm PVC Waste Nozzle with jamnut, full thread or half thread complete. 25 Supply, Fitting & Fixing of Plug with chain for waste with jamnut, full thread or half thread complete. 26 Supply, Fitting & Fixing of Polythene Coupling - (Nipple & Nut) 15 mm size 27 Supply, Fitting & Fixing of Polythene Coupling - (Nipple & Nut) 20 mm size 28 Supply, Fitting & Fixing of Polythene Coupling - (Nipple & Nut) 25 mm size 29 Supply, Fitting & Fixing of Polythene Coupling - (Nipple & Nut) 32 mm size 30 Supply, Fitting & Fixing of Polythene Coupling - (Nipple & Nut) 40 mm size 31 Supply, Fitting & Fixing of Polythene Coupling - (Nipple & Nut) 50 mm size 32 Supply, Fitting & Fixing of Polythene flange. i) 15 mm dia ii) 20 mm dia iii) 25 mm dia iv) 40 mm dia v) 50 mm dia 33 (A) Labour for fitting and fixing G.I. pipes above ground (exposed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting will be paid seperately) (i) 15 mm dia. (ii) 20 mm dia. (iii) 25 mm dia. (iv) 32 mm dia. (v) 40 mm dia. (vi) 50 mm dia. (vii) 65 mm dia. (viii) 80 mm dia. (ix) 100 mm dia. (x) 125 mm dia. (xi) 150 mm dia. (B) Labour for fitting and fixing G.I. pipes above ground (concealed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting will be paid seperately.) (i) 15 mm dia. (ii) 20 mm dia. (iii) 25 mm dia. 34 Labour for fitting and fixing G.I. pipes for under ground work including cost of jointing materials, cutting pipes,making threads etc. complete in all respect including cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting to G.I. pipes and specials with bituminous paint. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting to be paid seperately.) (i) 15 mm dia. (ii) 20 mm dia. (iii) 25 mm dia. (iv) 32 mm dia. (v) 40 mm dia. (vi) 50 mm dia. (vii) 65 mm dia. (viii) 80 mm dia. (ix) 100 mm dia. (x) 125 mm dia. (xi) 150 mm dia. 35 Labour for fitting and fixing G.I. specials including cost of jointing materials. (a) Plug. (i) Upto 25 mm dia. (ii) Above 25 mm upto 50 mm dia. (iii) Above 50 mm upto 80 mm dia. (iv) Above 80 mm upto 150 mm dia. (b) Socket, Reducing socket, Bend, Plain equal elbow, Reducing elbow, Nipple, Short piece. (i) Upto 25 mm dia. (ii) Above 25 mm upto 50 mm dia. (iii) Above 50 mm upto 80 mm dia. (iv) Above 80 mm upto 150 mm dia. (c) Plain tee, Reducing tee, Pendent tee, Jamnut, Socket and Nipple. (i) Upto 25 mm dia. (ii) Above 25 mm upto 50 mm dia. (iii) Above 50 mm upto 80 mm dia. (iv) Above 80 mm upto 150 mm dia. (d) Cross, Union, Long screw. (i) Upto 25 mm dia. (ii) Above 25 mm upto 50 mm dia. (iii) Above 50 mm upto 80 mm dia. (iv) Above 80 mm upto 150 mm dia. 36 Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance value not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application. (i) 150mm internal dia. (ii) 200mm internal dia. (iii) 250mm internal dia. (iv) 300mm internal dia. (v) 400mm internal dia. (vi) 500mm internal dia. (vii) 600mm internal dia. (viii) 800mm internal dia. (ix) 1000mm internal dia. 1 Labour for dismantling G.I. pipe with fittings. (i) 15 mm (ii) 20 mm (iii) 25 mm (v) 40 mm (vii) 65 mm 2 Refixing G.I. pipe with fittings after cleaning where necessary. (i) 15 mm (ii) 20 mm (iii) 25 mm (iv) 32 mm (v) 40 mm (vi) 50 mm (vii) 65 mm (viii) 80 mm (ix) 100 mm 3 Removing chokage in G.I. pipe including cleaning pipe. (i) 15 mm (ii) 20 mm (iii) 25 mm (iv) 32 mm (iv) 32 mm (b) Repair Works (vi) 50 mm (viii) 80 mm (ix) 100 mm (v) 40 mm (vi) 50 mm (vii) 65 mm (viii) 80 mm (ix) 100 mm 4 Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good all damages (i) 15 mm with cement concrete(4:2:1) with jhama chips (ii) 20 mm (iii) 25 mm (iv) 32 mm (v) 40 mm (vi) 50 mm (vii) 65 mm (viii) 80 mm (ix) 100 mm 5 Renewing P.V.C. clip with necessary screws. (i) 15 mm (ii) 20 mm (iii) 25 mm (iv) 32 mm (v) 40 mm (vi) 50 mm (vii) 65 mm 6 Opening out leaky water supply pipe and making the joints water tight i(ni)c l uUdpintog 4c0u tmtinmg dthiar.eads where necessary. (ii) 50 mm dia. (iii) 65 mm to 100 mm dia. 7 Renewing iron jamnut with washer. (i) 15 mm (ii) 20 mm (iii) 25 mm 8 Cutting out pipe and making threads. (i) Upto 20 mm dia. (ii) Above 20 mm upto 32 mm dia. (iii) Above 32 mm upto 50 mm dia. (iv) Above 50 mm upto 80 mm dia. (v) Above 80 mm upto 150 mm dia. 9 Perforating G.I. pipe of all diameters by drilling including taking G.I. pipes to workshop and back if required. 10 Making bend/offset in G.I. pipe by heat. (i) Upto 50 mm dia. (ii) Above 50 mm upto 80 mm dia. (iii) Above 80 mm upto 150 mm dia. 11 Cutting out section of G.I. water main pipe upto 100 mm. 12 Dismantling and refixing bib cock or stop cock. (i) 15 mm (ii) 20 mm 13 Rewashering stop cock/ bib cock/ push cock/ pillar cock including gland (pia) c k1in5g m imf necessary. (ii) 20 mm (iii) 25 mm (iv) 40 mm 14 Renewing brass spindle and valve of stop cock/bib cock/push cock/pillar (cio) c k 1.5 mm (ii) 20 mm 15 Dismantling and refixing shower rose after cleaning. 16 Renewing cromium plating of (a) bib cock/ stop cock/ pillar cock/ waste fittings. (b) Elbow action bib/ pillar tap. 17 Cutting out existing G.I.F.W. or U.F.W. or gas pipeline to required size (ain) d 1m5a mkimng t oth 2re0a mdsm including taking out and refixing. (ii) 25 mm to 32 mm (iii) 40 mm to 50 mm (iv) 65 mm to 80 mm (v) 100 mm 18 Drilling and tapping C.I. main. (i) Upto 15 mm (ii) Above 15 mm upto 25 mm (iii) Above 25 mm 19 Plugging up C.I. main with necessary materials & Labour Complete 20 Renewing copper plated gas cock C.P. or oxidised (approved brand, wall/ b6e nmcmh /t y1p0e m).m/ 15 mm (i) One way (ii) Two way (iii) Three way (iv) Four way 21 Renewing special make up piece of pipe having threads on both sides. (i) 15 mm (ii) 20 mm (iii) 25 mm (iv) 32 mm (v) 40 mm (vi) 50 mm 22 Dismantling upto 100 mm sluice valve by parts and cutting out worn out bolts and reassembling the same after regrinding valve,rewashering flanges, asbestos diamond packing including studs,bolts, nuts and necessary repairs. etc
|
