|
Balance Work At Phc Landher. Boq- 1 Brick work with common burnt clay F.P.S (non- modular) bricks of class designation 75 in foundation and plinths in cement mortar 1:6 (1cement : 6 coarse sand). 2 Extra for brick works in super structure above plinth level up to floor five level. 3 12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand). 4 6mm thick cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand). 5 15mm cement plaster on the rough side of single or half brick wall of mix in 1:6 (1 cement : 6 fine sand). 6 Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ; Size of tile 60x60 cm 7 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineer in charge over 12mm thick bed of cement mortar 1:3 (1cement : 3coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 8 Finishing walls with water proofing cement paint of approved brand and manufacture to given an even shade new work (two or more coats applied @ 3.84 Kg/ 10 Sqm 9 Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete 10 Distempering with oil bound washable distemper of Approved brand & manufacture to give an even shade over and including priming coat with cement primer. New work (two or more coats) over and including priming coat with cement primer 11 Providing & fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all complete. Fixed to openings / wooden frames with raw / plugs, screws etc. 12 Structural steel work welded in built up section/ framed work including cutting hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc as required in grating frames, guard bars, ladders, railings brackets, gates & similar works. 13 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing and similar work including applying a priming coat of approved steel primer. MS tube (Medium) 40 mm nominal bore 14 Providing and fixing 35mm thick factory made laminated veneer lumber door shutter conforming to IS – 14616 and TADS 15 : 2001 (part-B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer – in charge and paneling with panels of 12mm thick one side pre-laminated particle board (decorative lamination on one sides and other side balancing lamination) grade-1, medium density flat pressed three layer particle board FPT-I like or graded wood particle board FPT-I conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-lamination conforming to IS : 12823 Grade-1, Type II marked. 15 Proving & fixing 35 mm thick wire gauze shutters using galvanised M.S wire gauze of average width for aperture 1.4 mm both direction with wire of dia. 0.63mm for doors, windows & clerestory windows with hinges & necessary screws. Second class Kail wood. 16 Providing & fixingglazed shutters for doors , windows and clerestory windows using 10 Kg / Sqm. (4 mm thick) float glass panes , incl. ISI marked M.S pressed butt hinges bright finished off required size with necessary screws 35 mm thick of second class Kail wood. 17 Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard & soft wood). 18 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work. 19 Providing and fixing in position collapsible steel shutters with vertical channels 20x1 Ox2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T -iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer 20 Providing & fixing white vitreous china pedestal type water closet (European type WC pan) with seat and lid 10 litre low level white PVC flushing cistern, including flush pipe with manually controlled device (handly lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required WC pand with ISI marked white solid plastic seat and lid. 21 Providing & fixing wash basin with C.I /M.S brackts32mm C.P brass waste coupling of standard pattern, including painting of fittings & barrackets, cutting & making good well wherever required. (Hindware / Cera/Parrywaremake)Size 550 x 400mm 22 Providing and fixing white vitreous china pedestal for wash Basin completely recessed at the back for the reception of pipes and fittings. (Hindware / Cera/Parrywaremake) 23 Providing & fixing C.P. brass angle valve for basin mixer & geyser points of approved make conforming to IS: 8931. 15 mm nominal bore. 24 Providing & fixing C.P brass bib cock of approved quality confirming to IS 8931: 15 mm nominal bore. (Parry ware, Cera, etc). 25 Providing & fixing basin mixer of approved brand as per directions of engineer in charge 26 Providing & fixing of Jet of approved brand as per directions of engineer in charge 27 Providing and fixing C.P brass shower rose with 15 or 20 mm inlet 150 mm diameter. 28 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. 29 Providing & fixing 600 x 120 x 5 mm glass shelf with edges round of supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete. 30 Providing & fixing P.V.C waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia. 31 Providing and fixing 100 mm sand cost iron grating for gully, floor or Nahani trap. 32 Providing & fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm 33 Providing & fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 34 Proving & layingon terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Electroplate Star, Lotus or equivalent having valid ISI License). 35 Providing & fixing of 1 HP electric motor with fittins complete of approved brand as per directions of engineer in charge 36 Providing & fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 37 200x10 mm 38 100x10 mm 39 Providing & fixing kitchen sink with C.I brackets, C.P brass chain with rubber plug, 40 mm C.P brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required white glazed fire clay kithcen sink of size 600x450x250 mm 40 Supplying and fixing rolling shutters of approved make made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part 1 and M.S top cover of required thickness for rolling shutters 80x1.25 mm M.S laths with 1.25 mm thick top cover 41 Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) Crushed. incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete 42 Cement concrete flooring 1:2:4 finished with a floating coat of neat cement including cement slurry, but excluding the coat of nosing of steps etc. complete 50mm thick with 20mm nominal size of stone aggregate. 43 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z-section and other sections of approved make conforming to IS 733 and IS 1285, fixed with dash fastener ofrequired dia and size incl. necessary filling upto gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprane gasket felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl. cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge (glazing ,panelling and dash fasterner to be paid for reparately). For fixed portion For shutters of doors, windows & ventilators incl. providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprane gasket required (fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS 1868 minimum anodic coating of grade AC 15). 44 Providing and fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade-I, Type-II conforming to IS : 12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in panelling fixed in aluminiumdoors, windows shutters and partition frames with C.P brass / stainless screws etc. compete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. 45 Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawing and directions of Engineer-in-charge (Cost of aluminium snap beading shall be paid in basic items with floating glass panes of 5.50 mm thickness (weight not less then 13.50 kg/Sqm.) 46 Providing & fixing G.I pipes complete with G.I fittings and clamps I/C making good the walls etc. 47 15 mm dia nominal bore light. 48 20 mm dia nominal bore light. 49 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agg. 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated & grouted with fine sand including finishing the top smooth. (Crushed). 50 Carriage of material by M.T inclloading/unloading& stacking complete 51 Sand av lead 162 km 52 Stone agg below 40 mm nominal size av lead 84 km 53 Stone agg above 40 mm nominal size av lead 84 km 54 Bricks av lead 40 km
|
