|
40X40 Cushion Of Curvinalmofada In Courino Is Perfect For Those Looking For A Decorative And Protective Piece At The Same Time. Tamn: 40 Cm Long And 40 Cm Widagor: Multicolor, 2 -Door Cabinet For Professor With Steel Slate #26 (0, 45Mm) Normalized Cold Laminated On The Sides, In The Background, Shelves And Doors. A - Montable Product Using Lock, Lever And Nail System, Developed In High Stamping Technologies, And There Is No Need To Use Screws. B - Upper Lock Made Of Steel Plate #20 (0, 90Mm) With 3 Perpendicular Folds Being The 1St To 25Mm With 90 °, The 2Nd To 25Mm With 90 °, The Third At 15Mm With 90 ° And Ends With 10Mm, And With Lever System For Locking On The Sides. C - Lower Lock Made Of Steel Plate # 20 (0, 90Mm) 2 Perpendicular Folds Being The 1St To 20Mm With 90 °, The 2Nd To 45Mm With 90 ° And Ends With 15Mm And With Lever System For The Sides. D - Left And Right -Wing And Right -Wing Gates Of 380Mm (L) X1840mm (A) In Steel Plate #26 (0, 45Mm), Left Side Molded By 2 Folds Being 1 To 340Mm With 225 °, 2Nd A 20Mm With 135 ° And Finishes With 30Mm, Office Chair: Operational Revolving, At Least Type B, With Adjustable Arms In, At Least, According To Abnt Nbr 13962/2018 With At Least Low Back. Minimum Adjustments For Independent Movements For Seat Height, Double -Turned Double Casters, 360 Degree Turning/Backrest, Height Of The Arms, Height And Slope Of The Backrest. Backrest: Structured In Polypropylene Chassis Injected With Structural Reinforcement Fins, Flexible Foam Padding Injected Polyurethane Molded With Predominant Average Thickness Of 40 Mm And Endowed With Backward Polypropylene Backward That Leaves Inaccessible And Not Apparent The Points Fixation Of The Back Extensor In The Dripping Chassis And That Cover The Same Extender, Not Leaving It Apparent During The Vertical Adjustment Operational Course. Minimum Width Of 450 Mm Backrest And Minimum Vertical Extension Of 400 Mm Backrest, Backrest Adjustment At Least 5 Points, With Vertic Course, Chair That Fixed Use Multiple (General), Stackable, With Injected Polypropylene Seat And Backrest , With Holes To Facilitate Perspiration In The Seat And Backrest, Black Color, Minimum Dimensions Of 460 Mm Of Width For The Seat, 390 Mm Deep Surface For Seat, 300 Mm Of Absolute Total Height Of The Backrest And 460 Mm Of Useful Width Of The Backrest. Fixing The Backrest To The Structure With Isolation In Relation To The Structure So As Not To Mark The Plastic And Final Fixation Through Plugs With The Same Color As The Backrest. Setting Of The Seat By Pressure Under Pressure And Aluminum Rivets Or Special Plastic Screws. Fixed Structure Type 04 Manufactured Feet In Oblonga Carbon Steel With Platters Under The Seat In Cylindrical Section Tubes. All Tube Endings Should Be Protected By Injected Black Thermoplastic Tips With External Type Coupling. Backrest Support Made Of Two Oblong Tubular Rods And All Metal Components, 05 Liters Organizer, 19/02/2025, 20 Liters Organizer, Hexagonal Set In Thermoplastic Resin Table Composed And 6 Chairs? Adult Size, Table With Bipartite Top, Bicolor Measuring 1, 20M Diameter, Hexagon For Collective And Non -Individual Use, With Each Edge Measuring 60Cm, Thermopl Resin Top
|
