Bids Are Invited For Acquisition Of Office Furniture, Chairs, Hospital Medical Equipment, Several For The He ... in Brazil

Work Detail

Fixed Chair With Arms Model Secretariat: Seat: Multilaminated Plywood 12 Mm Thick; Anatomically Injected 45 Mm Thick Injected Foam And Density From 45 To 50 Kg/M3; Finishing On The Edges In Profile; Polyester Fabric Coating. Backrest: High Strength Polypropylene Injected Plastic Structure, Anatomically Injected 40 Mm Media Thick Foam And Density From 45 To 50 Kg/M3; Injected Polypropylene Copolymer Backrest; Sae 1020 Oblong Industrial Steel Tube Support 20X48mm, Wall 1, 50Mm; Polyester Arm Coating: With American Textured Polyurethane Injected, Over 8Mm Thick Sae 1020 Steel Soul The Arms Fixation In The Seat With Hexagite Screws, Flanged With Mechanical Lock In The Flange And Riveted Boundary Billets Structure Structure Formed By Sae 1010/1020 Round Steel Tube With 25Mm Diameter And 1.20 Wall Thickness Setting And Reinforcement Made Of Sae 1020 Steel Steel With 4 Mm Thick The Union Of The Trades In The Chair Structure Is Made By Mig Solder Process Forming A Single Structure For Later Fixing Seat Assembly With Fixed Tilt Between -2 And -7º And Holes With Distance Between Center Of 160X200mm Support Shoes In The Foot Injected Into Polypropylene Black Copolimero Finishing: 60-Microns-Layer-Type Dust Paint Finishing And Cure In Greenhouse To 200 C, Smooth Black W-Eco, With Previously Prepared Metal Surfaces Through Zinc Phosphate Treatment With Treatment. , Provocated Greater Finishing Adhesion In The Painting. Approximate Dimensions: Chair Height: 880 Mmprofundity Chair: 745 Mmlargure Chair: 645 Mmextension Of The Backrest: 435 Mmlargure Of The Back: 435 Mprofundity Of The Seat Surface: 460 Mmlargure Seat: 475 Seat Surface Macalture: 445 - 560 Mm Wagon Of 5% In Measures For More Or Less). , Stackable Fixed Chair With Stacking Fitting Assembly: Backrest Injected Into High Strength Polypropylene Copolymer, With A Standardized Color Of Special Pigments. It Has Anatomical Curvature, In Order To Allow The Accommodation Of The Dorsal And Lumbar Regions, Adapting Better To The Spinal. Fixed By Minimum Injected Polyamide 6.0 Lock System With Locking On The Backrest Pipe Without The Use Of Fixing Elements By Aparafusation.Intensive Injected Into High Resistance Polypropylene, With A Standardized Color Of Special Pigments. It Has Curvature On The Front Of The Seat To Avoid Strangulation In The Bloodstream. Without The Use Of Bonfire Fixation Elements. Pressure In The Seat Fixation Clips. Structure Formed By Tube At Least 19, 05 Mm In Diameter (3/4) And 1, 20 Mm Of Wall Thickness. 05 Mm And 1, 20 Mm Of Cold Curved Wall Thick, Executed And Calibrated By Machine.A Uni

Contact Information