|
Tender For Work Of Special Maintenance And Repair And Whitewashing And Painting Of Urja Bhawan - Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping through mechanical means and preparing the surface smooth including necessary repairs to scratches etc. complete. 2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 3 White washing with lime to give an even shade :Old work (two or more coats) 4 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer. 5 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coat. 6 Finishing walls with water proofing cement paint of required shade :Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. 7 Finishing walls with water proofing cement paint of required shade :Old work (one or more coats @ 2.20 kg/10 sqm) complete 8 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work. 9 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work 10 Re-lettering with black Japan paint of approved brand and manufacture. 11 Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. 12 Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 13 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer 14 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work. 15 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) . 16 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of] any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 17 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory , Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 18 Providing and laying Vitrified tiles of 600x600 mm size (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. 19 Providing and laying in position cement concrete of specified grade 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)excluding the cost of centering and shuttering - All work up to plinth level. 20 Brick work with Cement mortar 1:6 (1 cement : 6 coarse sand) common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to floor . 21 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. 22 Providing and fixing 10 lit. capacity white P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 23 Providing and fixing PTMT pillar cock 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gmsof approved quality and colour. 24 Providing and fixing 100 mm S.W. P trap/intercepting trap with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 25 Dismantling of leaky W.C pan with foot rest including its all fittings and re-fixing the serviceable W.C.pan (New W.C.pan shall be issued by the department free of cost) in proper position including provision of lead, lock joint, and also repairing of damaged plaster of wall & relaying C.C. 1:2:4 floor with base concrete including cost of all materials, labour, T&P etc. required for proper completion of work. 26 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin 430x260x350 mm or 340x410x265 mm sizes respectively. 27 Providing and fixing white vitreous china water closet squatting pan (Indian type).Orissa pattern W.C. pan of size 580x440 mm 28 Providing and fixing white vitreous china pedestal type water closet (European type W .C. pan) with seat and lid, 10 litre low level white P .V .C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. 29 Providing and fixing G .I. inlet connection for flush pipe connecting with W.C. pan. 30 Providing and fixing white vitreous china flat back wash basin of size 550x400 mm including making all connections but excluding the cost of fittings. 31 Providing and fixing 15mm nominal bore, 165 mm long, weighing not less than 110 gms PTMT bib cock of approved quality and colour. 32 Providing and fixing flexible 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 33 Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc.15 mm dia nominal bore 34 Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc.20 mm dia nominal bore 35 Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. 25 mm dia nominal bore 36 Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. 50 mm dia nominal bore 37 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15 mm nominal outer dia Pipes 38 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia Pipes 39 Supply and fixing 16/24 gauge galvanized mosquito proof wire net (jali) over window and ventilator including S/F of sal wood bead of size 8 cm x 1 cm including cost of all material, labour & T&P etc. 40 Repair of wooden shutter such as repair of replacement of top, bottom and intermediate rails part of style, only panels including dismantling and repairing the repairedshutter in proper position and fixing and adjustment of oxidized Iron fittings. 41 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 5.5 mm thick glass panel 42 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plug and embedding in cement concrete block size 30x10x15 cm with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 43 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) Sal wood. 44 Welding by gas or electric plant including transportation of plant at site etc. complete. 45 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 46 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm 47 Fixing of size handle 125mm 48 Fixing of size tower bolt250x10 mm 49 Fixing of size hinges 125x65x2.12 mm 50 Providing & fixing hinges 100 mm long of approved quality oxidized iron fittings. 51 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 52 Stone cleaning chemical approved by ASI 53 Beldar for floor cleaning and other Works, as and when required as per direction of Engineer-in-charge 54 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Two tank capacity of each 5000 ltr) 55 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore 56 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :20 mm nominal bore 57 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore 58 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :50 mm nominal bore 59 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore 60 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore 61 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms 62 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.plastic ball. 20 mm nominal bore, 120 mm long, weighing not less than 198 gms 63 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters 80x1.25 mm M.S. laths with 1.25 mm thick top cover 64 Hire and running charges of light crane 65 Trimming of branches of trees of different type of species standing in colony area using Hydra, expert labours, Saw, Rope, Axe and other T&P"s required for completion of work including all safety majours for the workers and stacking of branches of trees properly as per the direction of Engineer-in-charge. Work also including cleaning the site of debris and remain the trees. 66 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or asapproved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
|
