|
Pvc Skirting Board In The Kit (Gray Color) St Rk 2828-2016 Pvc Pvc Plinth Included (Gray), Corresponding To St Rk 2828-2016, Designed For Decorative Design And Protection Of The Joint Between Breakdowns And The Wall. The Product Should Provide Aesthetic Appearance, Strength , Resistance To Mechanical Damage, Moisture Resistance And Safety, As Well As Comply With The Established State Standards. The Skirting Board Must Be Made In Accordance With Article Rk 2828-2016, Providing Requirements For The Quality, Strength And Safety Of Polyvinyl Chloride Products. The Length Of The Skirting Board Is 2.5 M, The Height Is 40–80 Mm (Depending On The Specifications). The Wall Thickness Is At Least 2 Mm, Which Provides Sufficient Rigidity And Resistance To Mechanical Influences. Material -Pvc Of High Density With A Protective Layer That Provides 100% Moisture Resistance, Resistance To Ultraviolet Light (At Least 5 Years Without Changing Color) And Temperature From -30 ° C To +50 ° C. The Service Life Of The Product Is At Least 10 Years. Products Should Strictly Comply With The Requirements: Article Rk 2828-2016, St Rk Iso 9001-2016, As Well As Requirements For Abrasion, Mechanical Influences And Climatic Conditions. The Supplier Is Obliged To Provide Certificates Of Conformity, Passport Qualities, Acts Of Strength, Resistance To Abrasion, Moisture Resistance And Temperature Loads Confirming Compliance With The Established Standards And Standards. The Product Should Be New, Without Chips, Cracks, Stratification Or Deformations, With A Bright Texture And Saturated Coloring. Check With The Supplier The Presence Of A Component With Increased Flexibility Or Additional Protection Against Ultraviolet Radiation. A Sample Of Products Must Be Agreed With The Customer Before Delivery., Blackmate Self-Tire 3.5X30 Black Gost 1145-80 Self-Tapping Screws On Wood 3.5 × 30 Mm Black, Corresponding To Gost 1145-80, Designed For Fasteners In Construction And Installation Structures Made Of Wooden And Wood-Based Materials. There Should Be A Reliable Connection Is Provided, Strength Strength, Storage Resistance And Operation. Self -Tapping Screws Should Have A Diameter Of 3.5 Mm, A Length Of 30 Mm, A Full Or Partial Thread With A Sharp Tip For Self -Circulation. Production Material - Carbon Steel With An Anti -Corrosion Coating (Phosphate Or Oxidized Coating Of Black Color), Which Provides Protection Against Operation And Preservation Of Safety. Technical Characteristics: A Strength Class Of At Least 4.8, The Depth Of Thread Cutting-At Least 1/3 Of The Length Of The Rod, The Maximum Load On The Fracture-Corresponds To Gost 1145-80, The Thread Step Is Small To Prevent Cracking Of Wood. The Head Should Be Hidden With A Cross -Shaped Slot (Ph2 Or Pz2), Which Provides Reliable Fixation Of The Bit During Twisting. Products Must Comply With The Requirements Of Gost 1145-80, St Rk 1125-2002, St Rk Iso 9001-2016. The Supplier Is Obliged To Provide Certificates Of Conformity, Quality Passport, Acts Of Tests For Mechanical Strength, Torque, Resistance To The Box And Connecting Joints, As Well As Documents Confirming Compliance With Gost Requirements. The Product Should Be New, Without Traces Of Mechanical Damage, Threads Or Slots. It Is Supplied In A Packing That Meets The Requirements Of Gost, With A Clear Marking, Indicating The Date Of Production And Instructions For Use. Check With The Supplier The Presence Of Materials With Enhanced Corrosion Protection Or Increased Hardness For Working With Solid Wood. A Sample Of Products Must Be Agreed With The Customer Before Delivery., Interior Door 80 Included Gost 6629-88 Interior With A Width Of 800 Mm In The Kit, Corresponding To Gost 6629-88, Designed For Installation In Residential Premises. The Product Should Ensure The Reliability Of The Structure, Resistance To Mechanical Damage, Moisture Resistance, Sound Insulation And Durability. The Door Leaf Should Have Standard Dimensions Of 800 × 2000 Mm, A Thickness Of 35 To 45 Mm And Be Made Of A Wood Array (Pine, Oak, Ash), Mdf (Veneered, Laminated, Enameled) Or Combined Materials (Cell Filler, Timber Frame) . The Coating Should Be Veneered, Laminated, Enameled Or Made Of Pvc Film, Resistant To Abrasion, Moisture And Mechanical Damage. The Design Can Be Deaf Or With Glazing (Check With The Customer). The Door Should Provide A Sound Absorption Coefficient Of At Least 25 Db, Moisture Resistance Of At Least 60%, Mechanical Strength In Accordance With The Standards. Permissible Dimensions - No More Than ± 1 Mm, Surface Roughness - Not More Than 40 Microns. The Kit Should Include A Door Leaf, A Box (From An Array Or Mdf), Platbands (Width From 70 To 100 Mm), Loops (2 Or 3 Pcs.), Castle With A Latch (Cylinder Or Magnetic, Clarify From The Customer). Products Must Comply With The Requirements Of Gost 6629-88, St Rk 1125-2002, St Rk Iso 9001-2016. The Supplier Is Obliged To Provide Certificates Of Conformity, Quality Passport, Acts Of Tests For Strength, Moisture Resistance, Resistance To Abrasion, Mechanical Loads And Durability, As Well As Documents Confirming The Service Life And Compliance With The Requirements Of Gost. The Product Should Be New, Without Defects, Cracks, Chips, Relaxation And Visible Damage. The Coating Should Be Wear -Resistant And Resistant To Moisture And Chemicals. Clarify The Presence Of Analogues With Increased Moisture Resistance, Sound Insulation Or Fire Resistance With The Supplier, Foam Installation Gost R 59599-2021 Foam Montazh, Corresponding To Gost R 59999-2021, Designed For Sealing, Heat And Sound Insulation Of Installation Seams, Gaps And Joints In Building Structures. The Product Should Provide Adhesion, Exposure To Atmospheric Influences, Fit And Hold. The Foam Should Be One- Or Two-Component, With An Extension Of Not More Than 50%, Provide Adhesion To Concrete, Metal, Wood, Pvc And Brickwork. The Density After Curing - From 15 To 25 Kg/M³, The Degree Of Expansion - No More Than 1.5 Times From The Initial Volume, The Time Of Primary Setting - No More Than 10 Minutes, The Time Of Complete Curing - Up To 24 Hours In Standard Conditions. The Combustibility Class -G1 (Low -Combat Material), Resistance To Temperature Fluctuations -From -50 ° C To +90 ° C After Complete Curing. Products Must Comply With The Requirements Of Gost R 59999-2021, Article Rk 1125-2002, St Rk Iso 9001-2016. The Supplier Is Obliged To Provide A Certificate Of Conformity, Passport Quality, Tests Of Testing, Adhesion, Resistance To Moisture, Mechanical Strength And Temperature Loads Confirming Compliance With Gost Requirements. The Product Should Be New, Without Defects Or Gas Leakage, In Hermetic Aerosol Cylinders With A Capacity Of 750 Ml With Clear Marking, Indicating The Date Of Production And Instructions For Use. The Foam Should Be Resistant To Sunlight, Humidity And Temperature Changes. Clarify The Presence Of The Original With A Reduced Secondary Expansion, Increased Visibility Or Fire Causes. A Sample Of Products Must Be Agreed With The Customer Before Delivery. . Quantity - According To The Minimum Parties At The Supplier. Delivery - In The City Of Priozersk, Unloading At The Expense Of The Supplier. All Issues On The Purchase, Certification And Technical Characteristics To Coordinate With The Technical Control Department., The Cutting Of The Cut Gost 5089-2011 Soldering Lock Corresponding To Gost 5089-2011, Designed For Installation In The Door Leafs And Ensuring Reliable Protection Of The Premises. The Lock Should Have A High Degree Of Hacking Resistance, Using The Mechanism And Compliance With The Operating Rules. The Castle Should Be A Metal Type, Suitable For The Doors Of The Left And Right Opening, Have A Security Class From 1 To 4 (Clarify The Supplier), As Well As The Mechanism Of Locking The Cylinder Or Suvald Type. The Castle Case Should Be Made Of Steel, Brass Or Alloys With An Anti -Corrosion Coating. The Number Of Crossbars Is At Least 2, The Departure Of The Crossbars Is At Least 20 Mm, The Work Resource Should Be At Least 250,000 Cycles. The Castle Should Be Compatible With Doors With A Thickness Of 30 To 50 Mm And Meet The Requirements Of Gost R 52582-2012 In Terms Of Disgusting. Products Must Comply With The Standards Of Gost 5089-2011, St Rk 1125-2002, St Rk Iso 9001-2016. The Supplier Is Obliged To Provide Certificates Of Conformity, Passport Quality, Tests Of Testing For Hacking, Corrosion Resistance And Mechanical Reliability, As Well As Documents Confirming The Life Of The Service And Compliance With The Requirements Of Gost. The Product Should Be New, Without Damage, With A Smooth Course Of The Mechanism And A Protective Case. Clarify The Presence Of Components With Enhanced Burglar Resistance And Protection Against Mechanical Exposure. A Sample Of Goods Must Be Agreed With The Customer Before Delivery. . Delivery - In The City Of Priozersk, G., Unloading At The Expense Of The Supplier. All Issues On The Purchase, Certification And Technical Characteristics To Coordinate With The Technical Control Department., Butterfly Canopies In The Gost 5088-2005 “Butterfly Canopies In The Kit In The Kit, Corresponding To Gost 5088-2005, Designed For Installation On Interior And Light Door Structures. The Product Should Ensure Reliability, Smooth Opening And Stability To Wear. The Canopies Should Be Of A Detachable Type, Do Not Require A Fit, Provide An Opening Angle Up To 180 ° And Fit For Installation On The Door Of The Left And Right Opening. Production Material - Steel, Brass Or Aluminum Alloys With A Protective Coating (Galvanized, Chrome, Brass Or Powder). The Thickness Of The Canopy Must Comply With The Standard, And The Strength Of The Mounting Provides At Least 200,000 Opening Cycles. Products Must Comply With The Requirements Of Gost 5088-2005, St Rk 1125-2002, St Rk Iso 9001-2016. The Supplier Is Obliged To Provide A Certificate Of Conformity, Quality Passport, Acts Of Durability, Corrosion Resistance And Mechanical Strength, As Well As Documents Confirming The Services And Compliance With Gost Requirements. The Product Should Be New, Without Defects, With A Flat Surface, Without Burrs And Damage. Clarify The Presence Of Spare Parts With An Enhanced Load Function Or With An Additional Anti -Corrosion Coating. A Sample Of Goods Must Be Agreed With The Customer Before Delivery. Delivery - In The City Of Priozersk, Unloading At The Expense Of The Supplier. All Issues On The Purchase, Certification And Technical Characteristics To Coordinate With The Technical Control Department., Profiled Sheet Width 1.1 Thickness 0.7 M20 Gost 24045-94 Profiled Sheet M20, Corresponding To Gost 24045-94, Intended For Use In Building Structures, Roofing And Wall Coatings. The Product Should Provide Strength, Withstand The Load And Persist During Operation. The Profile Must Have A Thickness Of 1.1 M, A Thickness Of 0.7 Mm And Correspond To The M20 Profile. Production Material - Galvanized Steel With An Anti -Corrosion Coating (Clarify The Type Of Coating: Zinc, Polymer Or Alumo -Cycle). The Profile Should Have A Corrugation Height Of 20 Mm And Ensure The Rigidity Of The Structure. The Operating Temperature Of Operation Is From -50 ° C To +80 ° C, The Service Life Is At Least 30 Years. The Profiled Sheet Must Comply With The Requirements Of Gost 24045-94, St Rk 2621-2015, St Rk Iso 9001-2016. The Supplier Is Obliged To Provide A Certificate Of Conformity, Quality Passport, Acts Of Strength, Resistance To Corrosion And Climatic Influences, As Well As Documents Confirming The Services And Compliance With Gost Requirements. The Product Should Be New, Without Defects, With A Flat Surface, Without Cracks, Dents And Coating Stratification. It Is Necessary To Clarify The Supplier With A Reserve With An Enhanced Protective Coating Or Additional Coloring. A Sample Of Goods Must Be Agreed With The Customer Before Delivery. The Delivery Time Is No Later Than 15 Business Days. Quantity - According To The Minimum Parties At The Supplier. Delivery - In The City Of Priozersk, Unloading At The Expense Of The Supplier. All Issues On The Purchase, Certification And Technical Characteristics To Coordinate With The Department Of Technical Control It Is Necessary To Test The Zinc Test
|
