|
Providing And Fixing Furniture Work For The Office Of Deputy Director, Industrial Safety And Health At 5Th Floor Sahyog Sankul Gandhinagar.-1 10.00 Providing and supplying Law back chair for work center & other staff the seat & back are made of M.S frame work. The back foam should be designed with contoured lumber support for extra comfort. Caster of high durability & hydraulic. The size of chair 45cm x 45cm (Back side) and 45cm x 43cm (seat size). The PU foam should be molded with density =45 ± 2 kg/m3 .with One piece armrests. The armrests are scratch and weather resistant. The permanent contact mechanisms is designed with 360° revolving type, with pneumatic height adjustment & 17° maximum tilt only & tilt tension adjustment facility. complete as per sample approved and as directed by the Engineer in Charge 2 1.00 Providing and supplying Premium Executive High back chair for Office with M.S frame work. Upholstered with Artificial leather/ Leatherette and molded PU foam, together with molded seat & back covers. The back foam should be designed with contoured lumber support for extra comfort. Caster of high durability & hydraulic. The size of chair 53cm x 79cm (Back side) and 51cm x 49cm (seat size). The PU foam should be molded with density =45 ± 2 kg/m3. with One piece armrests. The armrests are scratch and weather resistant. The permanent contact mechanism is designed with 360° revolving type, 12º seat tilt 19° back tilt, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjestment, position locking with anti-shock back mechanism, Which should prevent the backrest from impacting the user when the lock is released. complete as per sample approved and as directed the Engineer in Charge 3 20.00 Providing and fixing a welded construction storage unit with shelves made from 0.7mm thick CRCA sheet (+/- 0.07mm), doors and back from 0.8mm thick high-yield strength CRCA sheet (+/- 0.09mm), and other components from 0.9mm thick CRCA sheet (+/- 0.08mm), The unit will feature a Mazak handle with a threeway locking mechanism. each shelf having a maximum uniform load capacity of 40kg. It will include 4 shelves with space to store A4 size box files (85w x 345H x 285D) vertically, and a clear space of 240mm above the fourth shelf. The unit will be finished with suitable oil paint instructed by EIC, the work includs all necessary fixtures, fasteners, machinery ,lifting and transportation charges . The work will be completed as per directed by the Engineer-in-charge. 4 7.00 Providing and supplying Medium back chair for work center & other staff the seat & back are made of M.S frame work. The back foam should be designed with contoured lumber support for extra comfort. Caster of high durability & hydraulic. The size of chair 47cm x 58cm (Back side) and 48cm x 48cm (seat size). The PU foam should be molded with density =45 ± 2 kg/m3 .with One piece armrests. The armrests are scratch and weather resistant. The permanent contact mechanisms is designed with 360° revolving type, with pneumatic height adjustment & 17° maximum tilt only & tilt tension adjustment facility. complete as per sample approved and as directed by the Engineer in Charge 5 16.80 Providing and fixing 12mm thick frameless Fully Glazed door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement or wall mount pivot hinge and making necessary holes etc. for fixing required door fittings, complete for all height as per direction and sample to be got approved by the Engineer in Charge including Door handle, Lock, closer and stopper etc. to be including as per drawing and instructions of Engineer-in-Charge. 6 8.00 Providing and supplying office Table with side table of made with 19mm Thk. Plywood structure as per architect drawing finished with 1.0 mm Thk. decorative laminate on outside portion &0.8 mm Thk. liner Laminate inside as specified & approved by architect fixed with necessary fixtures and fastening (Hardware) as per architect drawing. Provide Plastic Computer Desk Table Grommet Cable Wire Outlet Hole Cover 60mm, Key-board trey, Drawers with telescopic roller channels , Handle and locking arrangements with all necessary fixtures and fastening.Provide Shutters as per instructions fixed with handle , hinges , magnet , complete with bidding patties and all required hardware. Provide footrest as per instruction. All exposed edges shall be covered with required PVC beading Patti finished with approved melamine polishing work. Complete as per architect's drawing and as per instruction of architect & engineer in charge. 7 17.00 Providing and fixing ply wood cupboard made of all proof plywood with 0.8mm thick laminate finish. The cupboard shall have dimensions of 1800mm (Height) x 900mm (Width) x 450mm (Depth), and include required numberof laminated plywood shelves. The cupboard shall doors with handles and a locking mechanism. The back panel shall be made of 3mm thick plywood. All exposed edges of the plywood shall be lipped with 0.8mm thick PVC batten. The work includes all necessary fixtures, fasteners (including hinges, handles, and locking mechanism), labor, materials, and machinery, as directed by the Engineer-in-charge. 8 62.85 Providing and fixing required height wooden partition with MS framing. The grid is covered with 19mm thick Plywood on both sides. All exposed surfaces are finished with 1.00mm thick laminate of approved shade, ensuring no air gaps and incorporating grooves as per the design. The work includes creating holes or face plates for conduit pipes of electrical/ networking cables with openable studs and providing necessary grooves as shown in the drawing. The scope includes all materials, labor, adhesives, necessary hardware, and making cutouts for electrical raceways and other provisions, as directed by the Architect/Consultant/Engineer-in-Charge. No extra payment will be made for these adjustments. 9 10.00 Providing and Supplying a Standard Chair with P-type handles, featuring a non-revolving chair. The chair is constructed from durable metal steel with a powder-coated finish and is upholstered with PU leather on the seating and backrest for added comfort. The chair's overall dimensions are 60 cm (Width) x 60 cm (Depth) x 113-123 cm (Height). Completion of the work shall adhere to the specifications and instructions provided by the Engineer-in-Charge. 10 5.00 Providing & Supplying Curtain of Zebra Roller blinds with roller thread, with superior quality material & mechanism with necessary fittings, fixtures and fastening etc. complete as per approved and as directed by the Architect and approved by the Engineer in Charge. 11 6.00 Designing, Providing and fixing 32 mm to 35 mm thick Decorative type Laminated flush door single leaf shutters with solid core construction on existing frame or partition, 0.8 mm thick laminate on both sides including Stainless steel fixtures and fastening and SS handle including all accesories required complete, as per the directions of Engineer-in-charge. 12 144.00 Supply and installation of glass partition using Toughened/ Laminated glass in proprietary natural anodised/Black aluminium sections. The Glass to be fixed with help of Proprietary Stability GRIPPER Clamp to have a stable system. the glass needs to be fixed on existing wooden framing or on the floor using necessary fixing system for sturdy conncetions. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one side. Glass thickness - 8 to 10 mm. 13 144.00 Supply and apply high-quality dark (tinted) or frosted film to existing glass surfaces. The film must be durable, UV-protective, and provide privacy or aesthetic enhancement. Installation includes thorough surface cleaning, precise application without bubbles or wrinkles, and secure edge sealing.
|
