|
Providing And Fixing Furniture Work For The Office Of Assistant Director Boilers At 7Th Floor Sahyog Sankul Gandhinagar.-1 3.00 Providing and supplying Law back chair for work center & other staff the seat & back are made of M.S frame work. The back foam should be designed with contoured lumber support for extra comfort. Caster of high durability & hydraulic. The size of chair 45cm x 45cm (Back side) and 45cm x 43cm (seat size). The PU foam should be molded with density =45 ± 2 kg/m3 .with One piece armrests. The armrests are scratch and weather resistant. The permanent contact mechanisms is designed with 360° revolving type, with pneumatic height adjustment & 17° maximum tilt only & tilt tension adjustment facility. complete as per sample approved and as directed by the Engineer in Charge 2 1.00 Providing and supplying Premium Executive High back chair for Office with M.S frame work. Upholstered with Artificial leather/ Leatherette and molded PU foam, together with molded seat & back covers. The back foam should be designed with contoured lumber support for extra comfort. Caster of high durability & hydraulic. The size of chair 53cm x 79cm (Back side) and 51cm x 49cm (seat size). The PU foam should be molded with density =45 ± 2 kg/m3. with One piece armrests. The armrests are scratch and weather resistant. The permanent contact mechanism is designed with 360° revolving type, 12º seat tilt 19° back tilt, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjestment, position locking with anti-shock back mechanism, Which should prevent the backrest from impacting the user when the lock is released. complete as per sample approved and as directed the Engineer in Charge 3 2.00 Providing and fixing a welded construction storage unit with shelves made from 0.7mm thick CRCA sheet (+/- 0.07mm), doors and back from 0.8mm thick high-yield strength CRCA sheet (+/- 0.09mm), and other components from 0.9mm thick CRCA sheet (+/- 0.08mm), The unit will feature a Mazak handle with a three-way locking mechanism. each shelf having a maximum uniform load capacity of 40kg. It will include 4 shelves with space to store A4 size box files (85w x 345H x 285D) vertically, and a clear space of 240mm above the fourth shelf. The unit will be finished with suitable oil paint instructed by EIC, the work includs all necessary fixtures, fasteners, machinery ,lifting and transportation charges . The work will be completed as per directed by the Engineer-in-charge. 4 1.00 Providing and supplying Medium back chair for work center & other staff the seat & back are made of M.S frame work. The back foam should be designed with contoured lumber support for extra comfort. Caster of high durability & hydraulic. The size of chair 47cm x 58cm (Back side) and 48cm x 48cm (seat size). The PU foam should be molded with density =45 ± 2 kg/m3 .with One piece armrests. The armrests are scratch and weather resistant. The permanent contact mechanisms is designed with 360° revolving type, with pneumatic height adjustment & 17° maximum tilt only & tilt tension adjustment facility. complete as per sample approved and as directed by the Engineer in Charge 5 2.61 Providing and supplying executive Table including table unite , side unite made with 19mm Thk. Plywood structure as per architect drawing finished with 1.0 mm Thk. decorative laminate on outside portion &0.8 mm Thk. liner Laminate inside as specified & approved by architect fixed with necessary fixtures and fastening (Hardware) as per architect drawing. Provide Plastic Computer Desk Table Grommet Cable Wire Outlet Hole Cover 60mm, Keyboard trey, Drawers with telescopic roller channels , Handle and locking arrangements with all necessary fixtures and fastening .Provide Shutters as per insructions fixed with handle , hinges , magnet , complete with pvc bidding patties and all required hardware .Provide footrest as per instruction. All exposed edges shall be covered with required PVC beading Patti finished. Complete as per instruction of engineer in charge. 12 41.00 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along space etc. An additional 4mm thick PVC strip of 40mm width is to be stuck on the interior side of the C channel using PVC solvent adhesive complete as per direction of Engineer in charge, manufactures.s at the back side so that ‘L’ shape outer PVC beading can be removed when required for replacement of broken glass etc. complete as per direction of etc. complete as per direction of Engineer in charge and manufactuture’s specification.icationntre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineerincharge. Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-combustible as 13 18.00 Supply and apply high-quality dark (tinted) or frosted film to existing glass surfaces. The film must be durable, UV-protective, and provide privacy or aesthetic enhancement. Installation includes thorough surface cleaning, precise application without bubbles or wrinkles, and secure edge sealing.
|
