Giving Supply To Under Ground Cable Laying At 11 Kv Feeder From Vill. Khemkaranpur And Katrauli And Increasi ... in India
Tender Notice
TenderID
92770521
Tender Brief
Giving Supply To Under Ground Cable Laying At 11 Kv Feeder From Vill. Khemkaranpur And Katrauli And Increasing Capacity Of Tranformer At Vill. Sallhaypur And Hanuman Mandir Under Electricity Distribution Division-Rudauli, Ayodhya - The Work Of Safe Carria
Giving Supply To Under Ground Cable Laying At 11 Kv Feeder From Vill. Khemkaranpur And Katrauli And Increasing Capacity Of Tranformer At Vill. Sallhaypur And Hanuman Mandir Under Electricity Distribution Division-Rudauli, Ayodhya - The work of safe carriage of the following material with loading/unloading from store centre Darshan Nagar to site of work. (Approx. Distance 0 to 50 Km.) 2 ST Pole 11 Mtr. long 3 PCC Pole 8.5 Mtr. Long 4 ACSR Rabbit Conductor 5 ACSR Weasel Conductor 6 11 KV XLPE Cable 3x185 sqmm 7 11 KV Cable Jointing Kit Outdoor 3x185 sqmm 8 11 KV Cable Jointing Kit Staight Through 3x185 sqmm 9 AB Cable (3x95+1x70+1x16) 10 Transformer 250 KVA 11 XLPE Cable 1x400 sqmm 12 Other Line material i.e. cross arm / conductor / pin insulator / stay / earthing/cable Box etc. except A.B Cable. 13 Dragging of ST/PCC Pole as per RESPO Norms. 14 Fabrication and Erection of Double Pole Support on ST/PCC Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPoNorms.(Cost of clamps borne by contractor) 15 Fabrication and Erection of Single Pole Support on ST/PCC Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPoNorms.(Cost of clamps borne by contractor) 16 Stringing, Sagging, binding and jumpering of ACSR Rabbit Conductor as per RESSPO Norms 17 Stringing, Sagging, binding and jumpering of ACSR Weasel Conductor as per RESSPO Norms 18 Stringing, Sagging, binding and jumpering of AB Cable Size(3x95+1x70+1x16) as per RESSPO Norms 19 Grouting and Binding of Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms 20 Earthing of Poles as per RESPO Norms 21 Mounting of 250 KVA Transformer as per RESPO Norms 22 Shifting of 63 KVA Transformer 23 Shifting of 10 KVA Transformer 24 Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.) 25 Laying of underground 11 KV 3x185 sq mm XLPE Cable D/C in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable) 26 Hanaging,Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x185 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor) 27 Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPEcable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.) 28 Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPEcable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.) 29 Constructionof Plinth of250 KVA Transformer including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms 30 Fencing of Transformer Plinth 250 KVA with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc. 31 Connection of L.T. XLPE Cable 32 Supply and Laying of G.I. Pipe 6"" dia 33 Rect. Back100 KVA Transformer
Contact Information
Contact Person
Supertending Engineer, EDC Ayodhya
Address
EDC, Ayodhya
View Notice Now...
Fill Detail for Getting Instant Access
Download Tender Document / Tender Notice
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 92770521
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.