Tenders Are Invited For Reconstruction Of The Primary School In Kierzno To Create A Pre -School Department - ... in Poland

Work Detail

Task Implemented As Part Of The Project Entitled Reconstruction Of The Building Of The Primary School In Kierzno To Create A Kindergarten Department, Agreement For Co-Financing No. Fewp.05.01-Iz.00-0027/23-00, Under The European Funds Program For Wielkopolska 2021-2027. The Order Of The Order Includes Delivery, Assembly And Assembly Launching A Complete Photovoltaic Installation In A 6Kwp Land, In The Kindergarten In Kierzno, Kierzno 22, 63-600 Kępno, Plot No. 100, Kierzno Precinct, Kępno Commune. The Work Of The Work Includes, Among Others Geodetic,- Execution Of A 6 Kwp Solar Installation On The Ground On A Steel Structure, Consisting Of 12 Pcs - Connection To The Internal Electrical Installation Of The Building Via The Rg Main Switchgear,- In Order To Connect The Solar Installation To The Internal Network, The Construction Of A Cable Line From The Rpv Switchgear To Rg Switchgear,- Construction Works In The Room,- Securing Mesh Installation (Sealant Of The Item 48 Contents Of Works) - Due To The Location Of The Solar Installation At The Pitch, A Protective Mesh Should Be Made Up To The Height Of Pv Panels - Approx. 3 M, Which Will Also Be A Fence Separating From The Pitch. A Mesh With A Height Of 3 M (It Is Allowed To Change The Height To The Level Of Sheltering Of The Panels). Make With A 5 Mm Thick Polypropylene With An 80 Mm X 80 Mm Eye. Skill- Closed Profile 4X 8Cm Gr. 3Mm Painted In Ral 7016. Use A Horizontal Bar With A 40X40x3mm Profile Painted In Ral 7016. Foundation For Steel Columns 50X 50Cm Reinforced 4X Fi 12 Stirrups Fi 6 Every 30Cm Construction Related To Electrical Installations In The Building Of The Local Government Kindergarten In Kierzno - Annex 10 - Design Of The Existing Electrical Installation (2023). Construction Works Were Completed In 2024. Interference In The Building Is Associated With The Reconstruction Of A Given Range To The Original State (E.G. Complete Repainting A Given Room, Etc.). The Photovoltaic Installation In Question Consists Of The Following Elements:- 12 Pc Nominal Power Min. 500 Wp Each.- 2 Pcs. Three-Phase Microwave, For Photovoltaic Panels Converting Dc Energy Into Application Energy With Parameters Adapted To The Network, To Which The Inverter Will Transfer The Energy Produced. Vertical, It Is Allowed To Change The Structure To Installations With A Slope Angle Min. 25 Degrees- Connection Box And Power Security System From The Ac Side (Anti-Pressure, Overload And Short-Circuit, Anti-Surge). - Wiring And Connection System, - Grounding And Equipment Installation. Photovoltaics Are Fastened With Ready -Made Assembly Systems. Their Foundation On The Ground Is Designed Using Steel Legs With A Length Of Min. 3.5 M Of Which Min. 1.5 M Is Concreted In The Concrete Hole. The Concise Description Of The Subject Of The Contract And The Scope Of The Task Has Been Specified In The Design Documentation, The Pre -City Of Works. The Robots Will Be Conducted In An Active Object (Kindergarten), Therefore The Contractor

Contact Information