|
tender for Package-16 - DEVELAPMENT OF PUBLIC TOILET WORKAT PAOTA-PRAGPURA AREA Sl. No. Item Description 1 Earthworkinexcavationinfoundation,trenchesetc.including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground/Roadtoplevel.Inalltypessoils/saturatedsoilsuchas moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.Depth upto 1.5 m 2 Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the externalperimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost ofchemical emulsion). 3 Supplying Chlorpyriphos/ Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified 4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level : 1:4:8 (1 Cement : 4 Fine / coarse sand : 8 graded stone aggregate 40mm nominal size) 5 Random rubble dry stone Kharanja (soling) under floor. 6 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 Cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size)UNDER FLOOR 7 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing reinforcement - All work upto plinth level 8 Earth filling with available surplus soil excavated from foundations andtakenfrom outsideofbuildingplinthinlayersnot exceeding 20cm. in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and 9 Random rubble stone masonry work in cement mortar with mechanicalmixerinfoundation(atanylevel)completeasper drawingandtechnicalspecificationandasperclause1000and 1400 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering. 10 Brick workwith machinemoulded perforated bricks ofclass designation125conformingtoIS:2222-1991insuperstructure above plinth level upto two stories in cement mortar 1:6 (1 cement : 6 coarse sand) :With bricks. 11 Half brick masonry with bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1:4 (1 cement :4 coarse sand) 12 Cement plastering including T&P, scaffolding, material and complete lapour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster on rough side of single or half brick wallfinishedwithafloatingcoatofneatcementofmix1:4(1 cement : 4 fine/ coarse sand) 20 mm cement plaster of mix: 13 Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement : 4 fine/ coarse sand) 14 Providing and fixing T-iron frames for doors, windows and ventilatorsofmildsteelTee-sections,jointsmitredandwelded with15x3mmlugs10cmlongembeddedincementconcrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stoneaggregate20mmnominalsize)orwithwoodenplugsand screwsorwithdashfastenerorrawlplugsandscrewsorwith fixingclipsorwithboltsandnutsasrequireincludingfixingof necessary butthingesandscrewsandapplyingaprimingcoatof approved steel primer. 15 Centering and shuttering at all levels including at all levels including strutting, propping etc. and removal of form for: Susupended floors, roofs, landings, balconies and access platform : 16 Reinforced cement concrete work in walls (any thickness), includingattachedpilasters,buttresses,plinthandstringcourses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto twostoriesexcludingcostofcentring,shuttering,finishingand reinforcement :1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 17 ReinforcementforR.C.C.workatalllevelsincluding straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. 18 Providing and fixing glazing in aluminium door, window, ventilatorshuttersandpartitionsetc.withPVC/neoprenegasket etc. complete as per the architectural drawings and the directions of engineer-incharge(Cost of aluminium snap beading shall be paid in basicitem) : With float glass panes of 4.0 mm thickness 19 Painting top of roofs with bitumen of approved quality at 17 kg. per 10 sqmimpregnated with a coat of coarse sand at 60 cum per 10 sqmincludingcleaningtheslabsurfacewithbrushesandfinally with a piece of cloth lightly soaked in kerosene oil complete. Withresidual type petroleum bitumen of penetration 80/100 20 Providing gola 75x75 mm in cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishingwithcementmortar1:3(1cement:3finesand)asper standard design : In 75x75 mm deep chase 21 Chequered terrazo tiles 22 mm thick withgraded marblechips of sizeupto6mm infloorsjointedwithmeetcementslurry mixed with pigment to match the shade of the tiles including rubbing and polishingcompleteon20mmthickbedofcementmortar1:4(1 cement : 4 coarse sand) : Light shade using white cement. 22 Distemperingwithdrydistemperofapprovedbrandand manufacture(twoormorecoats)andofrequiredshadeonnew work, over and including priming coat of whiting to give an even shade. (Internal Paint) 23 Finishing walls with water proofing cement paint of required shade: Newwork(Twoormorecoatsapplied@3.84kg/10sqm.) (External Paint) 24 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 25 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc.laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. 1501 Cm2 to 3600 Cm2 Tiles 26 SAINITARY WORK PART-BProviding and fixing water closet squatting pan (Indian type W.C. pan)with100mmsandcastIronPorStrap,10litrelowlevel whiteP.V.C.flushingcistern withmanuallycontrolleddevice (handle lever) conforming to IS : 7231, with all fittings and fixtures completeincludingcuttingandmakinggoodthewallsandfloors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm 27 Providing and fixing water closet squatting pan (EUROPEAN type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 28 Providing and fixing white vitreous china flat back or wall corner typelippedfronturinalbasinof430x260x350mmand 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets,cuttingandmakinggoodthewallsandfloorswherever required : Rangeoffoururinalbasinswith10litrewhiteP.V.C.automatic flushing cistern. 29 ProvidingandfixingwashbasinwithC.I.brackets,ISmmC.P. brasspillartaps,32mmC.P.brasswasteofstandardpattern, includingpaintingoffittingsandbrackets,cuttingandmaking good with wherever require : White Vitreous China Flat back wash basin size 630 x 450 mm with single 15mm C.P. brass pillar taps 30 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 31 Providingandfixing600x450mmbevellededgemirrorof superior glass (of approved quality) complete with 6 mm thick hard boardgroundfixedtowoodencleatswithC.P.brassscrewsand washers complete. 32 Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. 33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply includingallCPVCplain&brassthreadedfittingsi/cfixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittingswithonestepCPVCsolventcementandthecostof cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.34.08.01 15 34 34.08.02 35 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointingofpipes&fittingswithonestepCPVCsolventcement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External wor32 mm nominal outer dia .Pipes. 36 ProvidingandfixingC.P.brasslongnosebibcockofapproved quality confirmingtoISstandardandweighingnot lessthan 690 gms. 15 mm nominal bore. 37 Providing and fixing square-mouth S.W. gully trap grade "A"’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100 x 100 mm size P type. (With F.P.S. 38 Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 gradedInside size 90x80 cm and 45 cm deep including C.I. cover with 39 Providingandplacingonterrace(atall floorlevels)polyethylene waterstoragetankISI:12701markedwithcoverandsuitable lockingarrangementandmakingnecessaryholesforinlet,outlet andoverflowpipesbutwithoutfittingsandthebasesupportfortank. 40 Providing and fixing C.P. brass stop cock (concealed) of standard designandofapprovedmakeconfirmingtoIS:8931.15mm nominal bore. 41 Providing and fixing PTMTball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P. / H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 42 Providingandfixingonwall faceUnplasticizedRigidPVCrain watertypesconfirmingtoIS:13592TypeAincludingjointing withsealringconfirmingtoIS:5382leaving10mmgapfor thermal expansion. Single socket pipes 75 mm diameter. 43 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.50 mmdia. nominal bore 44 ELECTRIAL PART-C Wiring of light point/fan point/exhaustfanpoint/ call bell point with1.5sq.mmnominalsizeFRPVCinsulatedunsheathed flexiblecopperconductor1.1kVgradeand1.5sq.mmnominal size FR PVC insulated unsheathed flexible copper earth conductor1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it"s ISI marked (IS:3419-1988) accessories,roundtiles,1.2mmthickHotDippedGalvanized ModularBoxwithearthterminal,10AModularswitch,Modular faceplatewithgridplate,3pinceilingrose/Holder/3way connector, screws, making connections, testing etc. as required. For specificationofcopperConductor,PhenolicLaminatedsheet"s& Electrical/ Wiring accessories refer Chapter-53, 54 & 56 for additionaltechnicalparametersofproduct/workreferAnnexure"A" attached with this BSR Short point (up to 3 mtr.) 45 Medium point (up to 6 mtr.) 46 Wiring of twin control light point with 1.5 sq. mm nominal size FRPVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexiblecopperearthconductor1.1kVgrade(IS:694)inrecessedISImarkedMMS(IS:9537P-III)PVCconduit&it"sISImarked(IS:3419-1988) accessories, round tiles, 2 Nos Hot DippedGalvanized M.S Modular box of 1.2 mm thick with earth terminal,2 Nos 10 A two way Modular switch, 3 pin ceiling rose / holder / 3way connector ,Modular face plate with grid plate, screws, makingconnections,testing BSR.parameters of product / work refer Annexure "A" attached with thisaccessoriesreferChapter-53,54&56foradditionaltechnical etc.asrequired.ForspecificationofcopperShort point (up to 3 mtr.) 47 Medium point (up to 6 mtr.) 48 Rewiring of light point/ fan point/ exhaust fan point/ call bell pointwith1.5sq.mmnominalsizeFRPVCinsulatedunsheathed flexiblecopperconductor1.1kVgradeand1.5sq.mmnominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P -III ) virgin material PVC conduit & it"s ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick MS box with earth terminal,6 A switch, 3 pin ceiling rose/holder / 3 way connector , 3.0 mm thick ISI marked (IS:2036-1995) phenolic laminated sheet, Al.alloy/Cadmium plated iron/ brass screws, cup washers, makingconnections,testingetc.asrequired.ForspecificationofcopperConductor, Phenolic Laminated sheet"s & Electrical/ Wiring accessoriesreferChapter-53,54&56foradditionaltechnical parameters of product / work refer Annexure "A" attached with this BSR.Short point (up to 3 mtr.) 49 Medium point (up to 6 mtr.) 50 3x 1.5 sq.mm ( For Extra Long Points Above 10 Mtr) 51 2 x 2.5 sq. mm. + 1x1.5sqmm ( For Light circuits) 52 1 x 4.0 sq.mm ( for submain line from Main Panel To 53 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. ( For Power Circuits) 54 Providing & Fixing of 240/415 V AC MCB with positive isolation of10kA breakingcapacity (B/C/Dtrippingcharacteristicasper type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000for80A&aboveratingincludingmakingconnections, testingetc.asrequired.OEMshallhavesubmitNABL/CPRI/ ERDA accrediated lab type test reports & All as per pre approved byEngineer in-charge. For additional technical parameters of product / work refer Annexure "A" attached with this BSR.SINGLE pole MCB40 A rating 55 Providing&Fixingof240/415VisolatorISImarkedIS:13947- III/conformingtoIEC60947-3,suitableforAC22Autilization category,4KVimpulsewithstandvoltage,truecontact indication, Redcolourdolly /levershall havesinglemouldcoveringoverall polesforoperation,twopositiondinrailmounting,minimum phaseterminationcapacityof35sq.mm.IP20contactprotection andfittedinexistingdistributionboard/sheetincludingmaking connections, testing etc. as required. OEMshall havesubmit NABL /CPRI /ERDA accrediatedlabtypetestreports& All as perpreapprovedbyEngineerin-charge.Foradditionaltechnical parameters of product / work refer Annexure "A" attached with this BSR. Triple pole Isolator 40 A rating 56 Providing&FixingofRecessed/surfacemountingheavyduty Enclosure made out from Galvanized steel / CRCA sheetnot less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3.powderpaintedcompletewithdinrailmakinginternalDB terminationswithcopperlugs,detachableglandplate,including makingconnections,testingetc.asrequired.Foradditional technical parameters of product / work refer Annexure "A" attachedwith this BSR Suitable for Two / Three / Four module for MCB 57 Providing&FixingofHeavy dutycapacitorstart,copperwound Doubleballbearing900/1400RPMsinglephaseExhaustfan conformingtoIS:2312ISImarkedinexistingopeningincluding making connections testing etc. as required. All as per pre approved byEngineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 300 mm sweep(900/1400 RPM)1200 mm Sweep BEE 2 Star rated 58 P&F 1.2mmthickM.S.Recessedfanbox,hexagonal/roundof size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mmlengthextendedoneachside.Allasperpreapprovedby Engineer in-charge. For additional technical parameters of product /work refer Annexure "A" attached with this BSR 59 Providing & Fixing of energy efficient/energy saving IP 20 LED directretrofitBulbinexistingholderorfixtureasrequiredwith system lumen efficacy ≥100 lm/Watt output ,pf 0.95 ,CRI>70,minimum lifetimeofminimum25000BurningHourswith, 70%ofintialLumenmaintanedtilllifeends,CCT3000°K/ 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). ManufacturesWordMark/NameEngraved/Embossing/Screen printing on housing. OEM must have its own in house NABL lab setupforalltestingfacilitiesforLEDfixtures.(LM79/LM80) certificate/ReportfromOEMshallbesubmitted.Allasperpre approvedbyengineerin-charge.foradditionaltechnical parametersofproduct/work,referAnnexure "A" attacheded withthis BSR. 60 Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in-charge. For additional technical parameters of product / work refer Annexure "A" attached with this BSR 61 Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in- charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR 62 Providing & Fixing of IS 11037:1984 marked non modular socket size flush type 120 watt rotary minimum 5 step fan regulator with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material including making connection testing etc. as required.All as per pre approved by Engineer in-charge. For additional technical parameters ofproducts/ work , refer Annexure "A" attached with this BSR .. 63 S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419- 1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure20 mm dia 64 25 mm 65 32 mm 66 40 mm 67 50 mm
|
