|
Tender For Secondary Building Less School At Bhs Gooripora-- 1 Earth work in excavation by mechanical means (hydraulic excavator) in trenches forfoundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : 2 Providing & Laying ofstone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete 3 Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) 4 P/Lin position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size 5 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate. 6 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 7 Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:3:6 coarse sand 20mm nominal size crushed stone agg.) 8 Centring and shuttering including proping, strutting & removal of the same. Up to plinth level, foundations, mass concrete. 9 CCentering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. 10 Centring and shuttering incld. Strutting, proping etc & removal of form work for suspended floors, roofs, landings, balconies & access plateform 11 Centring and shuttering incld. Strutting, proping etc & removal of form work for colums, pillars, piers, abts, posts and struts 12 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) and Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level 13 Providing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position Imported wood 14 Providing & fixing panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISImarked black enamelled M.S Butt hingeswith necessary screws excluding panelling ( importedwood) 30mm thick 15 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (30mm) 16 Providing & fixing of 40x5mm flat iron hold fast 40cm long including fixing to frameswith 10mm dia bolts nuts &wooden plugs and embedding in cement conc block 30x10x5cm 1:3:6mix (1cement:3coarse sand:6 graded st agg)20mm nominal size 17 15mm Cement Plaster on the rough side of single or half brick wall of mix 1:4(1 cement:4 fine sand) 18 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) 19 Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete 600x600mm 20 Providingglass panes 3.50 mm thick ) clerestory window shutters (Area of opening for glass panes excld portion inside shall be measured) including beading complete. 21 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick 22 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 23 Applying priming coat with ready mixed Pink or grey primer of approved brand and manufacture on WOOD work (hard or soft wood) 24 Painting with synthetic enamel paint of app. Brand & manufacture to give an even shade 2 or more coats on new work 25 Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars) 26 Providing hardware itemsof standard make as per directions of EIC 27 L Drop 28 Towerbolts 100 mm 29 Handles 150 mm 30 Handles 100 mm 31 stay hooks Hook 32 Making plinth protection 50 mm thick of cement concrete 1:3:6with 20 mm nominal size aggrigates over 75 mm bed of dry brick ballast 40 mm nominal size well rammed, consolidated & grouted with the fine sand i/c finishing the top smooth 33 Provding & fixing 04 layer 18 gauge (304)plain stainless steel railing 3 layer of approved make Like Jindali/c master pillar and boster on alternate steps or equlant i/c welding, polishing as per directions of engineer incharge complete 34 Filling available excv. Earth(excld. Rock) in trenches plinth sides of foundation etc. layers not excd. 20cm in depth consolidating each deposited layer by raming and watering lead 50m and lift upto 1.5 mtr 35 Supply and filling in plinth with 2nd class crushed stone dust under floors incld. watering, raming, consolidating and dressing complete.i/c all carriages 36 Structural steel in double section fixed with out connecting plate incld cutting hoisting fixing in positon and applying a priminng coat of approved steel primer all complete i/c soffits / eaves boarding 37 Providing corrugated G. S. sheet roofing including vertical/ curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal /vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2 38 Providing ridges of hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks bolts & nuts 8mm dia GI limpet & bitumen washers complete 0.50mm thick with zinc coating not less than 275g/sqm 39 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : imported wood 30 mm thick 40 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete 41 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with whitecement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown 42 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and asdirected by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent 43 Providing and fixing soil wastepipes 100mm dia PVC B Class of approved make. 44 Providing and fixing vent pipes 75mm dia PVC B Classof approved make. 45 P/F of100 mm PVC callor ofapproved make. 46 P/F of PVC floor trap with Jali of Approved make 47 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 20mm OD(SDR-7.4) 48 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.External work including trenching, refilling etc. PN-16 pipe , 25mm OD (SDR-7.4) 49 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required. White vitreous china Orissa attern W.C. pan of size 580x440 mm with integral type foot rests 50 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 51 Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 52 Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931 53 Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 54 P/F man hole 1" x 1"x 1.25" of Cement concrete, finished internally with neat cement, plastered externally in 1:4 mixincl cover with frame. 55 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brasssingle hole basin mixer of approved quality and make, including paintingof fittings and brackets, cutting and making good the walls whereverrequired:- 56 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings 57 Dry rubble masonry with hard stone in foundation & plinth using quarry stone with bond stones i/c all carriages 58 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 59 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. 60 Providing and fixing of Foundation stone / innaugration stone 2" x 3" (engraved on Black Granite as per requirment) with wooden cornice 2"x2"includingall thenecessary items required at siteand as directed by EIC. 61 Clearance of site after completion of projecti/c removing of surplus material from site as directed complete job 62 Carriage of materails By Mech.Transport, from source to site of work 63 Stone agg. for an avg lead of 10 km 64 Sand for an avg lead of 5 km 65 Bricksfor an avg lead of 20 km 66 Electrification. 67 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X1.5 sq. mm FRLS PVC Insulated copper conductor Havell/Polycab/ Anchor/eq, standard make as desired by engineer incharge) single core cable in surface/recessed medium class PVC conduit, with modular switch (Anchor roma plus/Legrand Mylinc /35K NV/schneider Livia /ABB Tvisha make.), modular plate suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC Insulated copper conductor single core cable etc. as required.same approved by EIC. 68 Wiring for group controlled (looped) light point/fan point/exhaust tan point/ call bell point (without independent switch etc.) with 1.5 sq mm FRLS PVC Insulated copper conductor (Havell/Polycab/paraflex/ Anchor/equivalent as directed by engineer Incharge.) single core cable in surface/ recessed PVC condult, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. 69 Wiring for light/ power plug with 2X4 sq. mm 1X 4 sq. mm earth wire FRLS PVC Insulated copper conductor Havell/Polycab/Anchor/ equivalent as directed by engineer incharge) single core cable in surface/recessed medium class PVC conduit. 70 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable Gl box connections etc. as required. Modular Switch & Socket:- (Anchor roma plus/Legrand Mync/SSK NV/schneider Leiya /ABB Tvisha make make) same approved by EIC. 71 Wiring for lighting circuits/8-10 amp power plugwith 2X2.5 sq. mm FRLS PVC insulated copper conductor Havell/Polycab/Fenolex/Anchor/ equivalent as directed by engineer incharge) single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 72 Supplying and fixing suitable size Gi box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required (For light plugs to be used in non residential buildings) Modular Switch & Socket Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia ABB Tvisha makes Sample to be approved by theE.I.C. 73 Supplying and fixing suitabile site G.I box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modutar socket outlet and 5/6 A modular switch. connections etc, as required. 74 Wiring for circuit/ submain wiring alongwith earth wire with the Icllowing sizes of FRLS PVC Insulated copper conductor ( Havel/Polycab/ Anchar/ equivalent as directed by engineer incharge), single core cable in surface/recessed medium class PVC ccndult as required. 75 (b) 2 X 10 sq. mm+1X6 sq. mm earth wire 76 Supplying and fixing of following sizes of medium class PVC conduit Anchor/ Ravindra/ Eq. make along with accessories in surface/recess including cutting the wall and making good the same in case of recessed condult as required,. 77 25mm 78 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 79 Supply installation testing and commissioning of indicator of Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia Crabtree athena make.). 80 Sub Head-2-Fixtures and Fittings 81 S/F testing and comm. Of 20 Watt 4 It wall mounted LED batten with powdered coated aluminum housing & integrated electronic driver with THD<10%. (commercial series) Philips/Trulus/wipro/Havell make/eq. standard make as directed by engineer incharge. 82 Supply, Installation, Testing and Commissioning of 1200 mm sweep, decorative ceiling fan with 3 No. Aluminium blades, 30 cm lang down rod, 2nos, canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete. USHA/Havells/Crompton make (sample to be approved before installation) (3 star). 83 upply and fixing of 6 amp/250 V AC fan dimmer step type 2 module with cover plate Anchor roma plus/Legrand Mylinc /ABS Tissha/schneider Livia/Havell Coral make.. 84 Supplying, and fixing following way, single pole and neutral, sheet steel, MCB distribution board. Haveli legrand/ Shinider/SSK make) 240 V, on surface/ recess.complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. But without.MCB/BCCB/Isolator). 85 2+14 way. Double door 86 S/F testing and comm. Of MCB"s 10 K of the below mentioned capacities in sub main controls legrand C curve/ Schinider/ ABB Jequivalent make as directed by engineer incharge. 87 a) 6-32 Amp SP MCB 88 b) 40-63amp DP MCB 89 Pronding of Chemical earthing as per 15 standards by way of digging 10 deep pit then embedding 3 meter G.I Earthing electrode 80mm dia, connecting the plate with main control baard by 10 SWG G1 wire with 1/2" dia. Full thread brass nul and bolt and washers. Refilling of pit with chemical compound 90 S/L, testing and commissioning of PVC XLPE insulated alluminium un armoured cable 650 V/1100 V Grade as per 15 7098 (Part 1) 1988 with upto Date Amendments. Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. 91 c)16 sq.mm 2 core 92 Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.5. sheet steel. floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears,, Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required. (As per approved design size may vary as per site requirement) 93 Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthine etc as required 94 Normal INCOMING: 95 (a) 125A 2P MCCB 25 KA including spreader Links including spreader links, icurics 100% Adjustable thermal and Adjustable magnetic release) Legrand/Shinider/Semiens/ABB make. 96 b) 2. No. of Aluminium Bus Bar of 200 Amp. 97 c)Digital meters and phase indicators-1 set. 98 OUTGOING: 99 c) 40-63amp DP MCB 100 d) space for 6 way MCB"s
|
