|
Tender For Construction work of Baraatshala in village Bethar - Excavation in foundation in ordinary soil(loam clay or sand) including lift upto 1.5m and lead upto 30m.and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of earth.asSS.I. 251 2 Providing and laying in cement concrete 1:6:12(1cement : 6 fine sand :12, 40 mm brick aggregrate ) .As per S.I.No. 273 3 M -150 class Brick work in 1:6 cement & fine sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials,Labour and T&P etc. required for proper completion of work. S.I. 303 4 Class-150 brick work in 1 :4 cement and Coarse sandmortar in foundation and plinth . As per S.I.No. 305 5 M -150 class Brick work in 1:4 cement & fine sand of 1.25 F.M. mortar in super structure including supply of all materials,Labour and T&P etc. required for proper completion of work. S.I. 310 6 Mild steel or iron work of small sizes and sections such as holding down bolts, hold fasts,ties,rods, gratings etc. (when not included in an over all rates) wrought to required form including supply of steel bolts, nuts, and wastage etc. and their fitting required for proper completion of work. 7 S/F of Aluminium Door 8 R.C.C. work with cement approved coarse sand and 2cm,gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also supply of all materials, labour and T&Prequired for proper completion of work.asS.I. 283 9 R.C.C. work with cement approved coarse sand and 2cm,gauge approved stone ballast in the proportion of 1:2:4 in Beams excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also supply of all materials, labour and T&Prequired for proper completion of work.asS.I. 285 10 R.C.C. work with cement approved coarse sand and 2cm,gauge approved stone ballast in the proportion of 1:2:4 in Slab excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also supply of all materials, labour and T&Prequired for proper completion of work.asS.I. 284 11 Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (when not included in over all retes) wrought to required shape as necessary including binding for proper completion of the work and including supply of all steel and wastage & over lapping &hooks. as S.I. 504 12 12mm thick plaster with cement mortar in proportion of 1:6 with cement and fine sand of 1.25 F.M. as S.I. 586 13 20mm thick 1:3 cement :c.sand plasteron roof 14 Earthwork in cutting or in embankment in ordinary soil exacavation in the form of regular pits with cartage 5km. 15 Providing and laying Vitrified tiles in floor in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.As per DSR 11.49.2 ie 1725.35*0.735*108/107 16 Providing and applying white cement based putty of average thickness of 1mm of approved brand and manufacture over the plastered surface to prepare the surface even and smooth complete. As13.80 17 Finishing walls with acrylicpaint of approved quality on new work with two coats to give an even shade including all As per DSR 13.47.1 18 Painting or varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint and teo coat enamel paint including all 19 S/F of 100mm dia PVC pipes with necessary clamps and nails etc. 20 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shadeas per DSR 8.31 ie 1267.95*0.735*108/107 21 Providing and Laying of Interlocking Tiles 80mm thick of 30kn/sq.m 22 Wiring point for light with 1.50sq. mm FR PVC insulated multistrand single core copper conductorcable in H.G PVC conduit concealed inwall with 14 SWG copper earth continuity wire piano type switch & ceiling rose angle / batten holder on 3 mm thick phenolic laminated sheet as directed engineer incharge including matching colour wash as per S.I no. 131(C) 23 Wiring point for fan/fresh air fan with 1.50sq. mm FR PVC insulated multistrand single core copper conductorcable in H.G PVC conduit concealed inwall with 14 SWG copper earth continuity wire piano type switch & ceiling rose angle / batten holder on 3 mm thick phenolic laminated sheet as directed engineer incharge including matching colour washas per S.I no. 133© 24 Wiring point for plug with 1.50sq. mm FR PVC insulated multistrand single core copper conductorcable in H.G PVC conduit concealed inwall with 14 SWG copper earth continuity wire piano type switch & ceiling rose angle / batten holder on 3 mm thick phenolic laminated sheet as directed engineer incharge including matching colour wash as per S.I no. 134© 25 Wiring point for exhaust fanwith 1.50sq. mm FR PVC insulated multistrand single core copper conductorcable in H.G PVC conduit concealed inwall with 14 SWG copper earth continuity wire 15 A piano type switch & ceiling rose angle / batten holder on 3 mm thick phenolic laminated sheet as directed engineer incharge including matching colour wash as per S.I no. 137© 26 S/F of power plug with 15A 250 V F/T Switch & 5pin15A 240 V F/T universalsocket in suitable M.SBox of 175x100x50mm sizephenolic laminated sheet cover with brass machine screw and cup washeras per SI no. 1139 27 S/ wiringofsubmain with two number 1.50sq. Mm FR PVC insulatedcopperwire submain as per S.I No. 1304(c) 28 S/ wiringofsubmain with two number 2.50sq. Mm FR PVC insulated multistrand copperconductor in20 mm dia heavy duty PVC conduit with one no. 2.50mmFR PVC insulated multistrand copper conductor as earth contuinity wireas per S.I No.216(c) 29 S/ wiringofsubmain with two number 4.00sq. Mm FR PVC insulated multistrand copperconductor in25 mm dia heavy duty PVC conduit with one no. 4.00 mmFR PVC insulated multistrand copper conductor as earth contuinity wireas per S.I No.217(c) 30 S/ wiringofsubmain with two number 6.00sq. Mm FR PVC insulated multistrand copperconductor in25 mm dia heavy duty PVC conduit with one no. 6.00 mmFR PVC insulated multistrand copper conductor as earth contuinity wireas per S.I No.218(c) 31 S/F 6A to 32A SP MCB (10ka) as per S.I No.1002 CAT B 32 S/F of LED Tube Light with batten suitable for up to 1x22 watt LED tube light including tube on Surface as per s.i. no. 1413 CAT-AA 33 S/f of electronicfan regulator 120-280 V ISI marked on the existing board i/c making connection labour and T&P etc.as per S.I No.1203A 34 P/F of submercible Pump with boring 35 Providing & fixing g.i pipe complete with g.i fitting & clamps including cutting & making good the wall etc.(internal work)(a)25 mm dia nominal bore(medium duty) 36 Providing & fixing G.I pipe complete with g.i fitting & clamps including cutting & making good the wall etc.(internal work)(b)15 mm dia nominal bore 37 Providing & fixing g.i pipe complete with g.i fitting & clamps including cutting & making good the wall etc.(internal work) © GI reducing socket(25 to 15 mm) 38 (d) GI cross tee 15 mm 39 (d) GI cross tee 25mm 40 (e)GI reducing tee(25x25x15mm) 41 (f) GI elbow 15 mm 42 (f) GI elbow 25mm 43 (g) GI socket 15 mm 44 (g) GI socket 25mm 45 Poviding and fixing c.p brass bib cock/stop cock of approved quality confirming to IS 8931 (a)15 mm dia nominal bore 46 Providing & fixing25 mm gun metal full way gate valve with wheel of approved quality. PWD Specification No. 18.17.1 47 Providing & fixing on terrace polyththene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet outlet and over flow pipeps but without fittings and the base support for tank 48 Providing and fixing white vitreous china water closet squatting pan(Orissa type w.c pan) with 100 mm sand cost iron p or stype,10/ liter low level pvc flushingmm dia c.p flush pipe fitting & clamp, mm overflow pipe with special & masquito proof coupling of approved municipal design,painting wherever required including cutting &making good the wall &floor where required.as per PWD LKO DAR No-17.1.1 49 Providing & fixing white vitreous china wash basin with c.i bracket ,painted with 15 mm c.p brass pillar taps, 32 mm c.p brass chain rubber plug 32 mm c.p brass waste of standard pattern,including cutting & making good of the wall wherever required. 630x450 as perSOR LKO PWD DAR No-17.7.2 50 Providing & fixing soil waste pvc pipe &vent pipe. (a)110 mm dia pvc pipe 51 Providing & fixing soil waste pvc pipe &vent pipe. (b)90 mm dia pvc pipe 52 Providing & fixing soil waste Cast iron pipe &vent pipe. (a)100 mm dia & 1.80m long cast ironpipe 53 S/F of C.P Brasstowel rail 750x 20 mm with c.p brass bracket 54 P/F of mirror of superior glass of Rectangular Shape 450x600mm as per PWD DAR Lucknow 17.31 55 P/L of S.S Railaing 56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all as per DSR 11.56.1 57 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. as per DSR 12.20 i.e. 709.75*0.735*108/107 58 S/F of sign board &photography
|
