|
Supply, Installation, Testing And Commissioning Of Mrf Equipments For Establishment Of Solid Waste Management Facility At Municipal Council Pulwama.-- 1 Electro mechanical 2 SITC of 600-650Kgs/hr, Twin shaft Shredder Machine with feeding Hooper for Municipal waste, technical specifications as per annexure. 3 SITC of 25 Ton pressure capacity single cylinder vertical Bailing Machine, technical specifications as per annexure. 4 SITC of Sieving Trommel Machine for compost with Loading Hooper and Reject Tray, technical specifications as per annexure. 5 SITCSegregator Machine with feeding Hooper and (8 No’s) of HDPE Dustbins of 100ltrs capacity, technical specifications as per annexure. 6 SITC ofPortable Water Sprayer Machine, technical specifications as per annexure. 7 SITC of Sanitary Disposal Machine with smoke control unit , technical specifications as per annexure. 8 SITC of 100 KVA DG set -3- phase, 415V, 50 Hz, 1500 rpm, silent type, water cooledincluding earthing , technical specifications as per annexure. 9 SITC of LT Modular Control Panel, technical specifications as per annexure. 10 Providing and Fitting of 95 Sq.mm, 3.5 core LT 1.1 KV, XLPE Insulated Armored Aluminum Cable with thimbles, technical specifications as per annexure. 11 Providing and Fitting of 25 Sq.mm, 4core 1.1 KV, PVC insulated multi-strand copper cable with thimbles, technical specifications as per annexure. 12 Providing and Fitting of 6sq.mm, 3core 1.1 KV, PVC insulated multi-strand copper cable with thimbles, technical specifications as per annexure. 13 Weight bridge 14 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:( JKSOR 2.9.1 All kinds of soil) 15 Supplying of graded crushed stone aggregate and stacking at site.(JKSOR 16.4.1) 16 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density. JKSOR 16.5 17 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (JKSOR 4.4.7) 18 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) (.JKSOR 5.1) 19 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level: TMT bars of grade Fe-500D or more. (JKSOR 5.22.6) 20 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete. (JKSOR 4.6.1) 21 Carriage of sand, stone aggregatebelow 20 to 40mm nominal sizebeyond 20km upto 30km including loading unloading. (JKSOR 1.1.5) 22 Carriage of soling stonebeyond 20km upto 30km including loading unloading.(JKSOR 1.1.7) 23 Carriage of cement beyond 10km upto 20km including loading unloading.(JKSOR 1.1.10) 24 Carriage of steel beyond 10km upto 20km incuding loading unloading.(JKSOR 1.1.11) 25 SITC of 20MT Weight Bridge Surface Mount (Pit-less) 7.5M x 3M electronic Weight Bridge, technical specifications as per annexure. The job includes Steel Platform, Digital Indicator (01 No.),Load Cells with assembly kits (06No"s), Junction Box (01No.), Surge Protection Device(01No.), Cables and Connectors as required, Truck Scale Software, PC(01No.), Printer(01No.), UPS(01No.),CVD(01No.) Load testing and Stamping from Legal Metrology Department.The job includes labour,hydra crane,tools tackles etc for installation of the complete unit. The job also includes providing and fitting ofchemical earthing of size 2000mm long 80mm dia. 02 No"s and 2-coresingle phase copper cable ,switch,socket,MCB etc as per site requirement. The job excludes the cost on account ofmonitoring room.
|
