|
Tender For Gated Bandhara at Yevata No ,Tq. Chikhali, Dist. Buldana. - Excavation in all kinds of Soils & Soft murum including boulders upto 0.60 mtr. diameter (0.113 cum) seatiing of embankment, filter drains etc. and placing the excavated material neatly in dump area as directed including cost of all materials, machinery, labor, dressing bed and sides to required level and profile etc. complete with all lead & lift. 2 Excavationin Hard murumincluding boulders up to 0.60 m diameter( 0.113 cum ) for canal, seating of embankment, filter drains/ catch water drains etc, and placing the excavated stuff neatly in dump area or for formation of service road/ embankment including cost of all materials, machinary, labour, dressing bed and sides to required level and profile etc. complete with lead up to 15 m and all lifts as directed. 3 Excavation inSoft Rockofall toughness by blasting including boulders above 0.6 m dia.(0.113Cum) minimizing damage to side slopes of excavation in water prism area by adoptinganyoneorcombinationoflinedrilling /pre-splitting /smooth blasting techniques and placing the excavated rock neatly in approved dumpareaincludingcostofallmaterials, machinery, labour, leveling bed etc., complete with lead up to 15 m and all lifts as directed. 4 Excavation in Hard-Rock of all thoughness by blasting including boulders above 0.60 mtr. diameter (0.113 cum) minimising damage to side slope of excavation in waer prism area by adpoptig any one or combination of line drilling / pre-spilting / smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all materials, machinery, labor, leveling bed etc. complete with all lead and lift. 5 Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/ RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer with shuttering and scaffolding,placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed. 6 Providing, Fabricating and placing in position reinforcement steel for RCC works including cutting ,bending ,hooking, laying in position and tying M.S./ HYSD / TMT bars for reinforcement of RCC works As per Detail Drawing etc Complete as directed. 7 Back filling up to ground level behind the canal structures etc. complete (without royalty) with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete. 8 Manufacturing with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M- 94 Kg. weight as perrelevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc richprimer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177 9 Providing & Fabricating Structural steel work in rolled sections like joists channel, angles, Tees etc as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/ welded/ bolted connection without connecting plates, braces etc and including 1 coat of anticorrosive and over it two coats of oil painting of aprroved quality andshades etc complete 10 Dewatering by pumping out water collected with 10 to 19 HP Diesel & Electrical pumps including cost of all materials, machinery, labour, providing sump and all other ancillaryoperations whenever necessary etc. complete under specific nd indispensable circumstances with prior approval from ompetent authority with authentic evidence of records justifying dewatering etc. complete as directed. 11 Providing and fixing canal information board of 1.2x0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x3 mm with cross bracing of size 25x25x3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border/letters/numeral / arrows coated with non-peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on topand painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60x60x75 cm as directed. 12 Royalty not included in rates 13 GST(18%) 14 GIS(1%)
|
