Tender For Supply Of Material/ Equipment For Development Of Distribution Infrastructure Work For Segregation ... in India

Work Detail

Supply of material/ equipment for DEVELOPMENT OF DISTRIBUTION INFRASTRUCTURE work for Segregation of 11 KV mixed feeders at Salumber Circle of Ajmer Discom of Rajasthan State under REVAMPED REFORMS-BASED AND RESULTS-LINKED, DISTRIBUTION SECTOR SCHEME (RDSS) on turnkey basis against TN-151--1 Segregation of remaining Agriculture Feeders under RDSS 2 A) HT Lines and associated works: 3 A-(1) 11 KV 3 Phase Overhead Line (ACSR Rabbit) 4 Supply of PCC Poles 9 mtrs (200 Kg) 5 Supply of overhead steel cored aluminum ACSR Rabbit conductor. 6 Supply of 11 KV V Cross arm with top hamper & clamps (galvanized as per IS), 0.2 m long made of MS Channel 100x50x6 mm,MS Angle 65x65x6 mm & MS flat of size 50x6 mm weight(12.789 Kg.) Approx. 7 Supply of Galvanized Stay set of 1.8 m long, 16 mm diameter solid GS stay rod & 300x300x4 mm anchor plate including, 2 Nos. 50x8 m Stay clamp, 1 nos. HT stay guy insulator, nut bolts, 2 Nos. turn buckles & 7/3.15 mm dia GI stranded wire etc. 8 Stay Set 9 Strain/Guy Insulator 10 Stay Wire 7/10 mm size (1 set = 5.508 Kg) 11 Stay Clamps (Set = 2 Nos. Clamps) ( 1.7 Kgs. Approx) 12 Supply of11 KVdouble pole line structure set for cut point complete on existing poles in all respect with clamp, nut & bolts as requried made fromM.S.Channel 100 x 50x6 , M.S.Angle 65 x 65 x 6 mm, M.S.Angle 50 x 50 x 6 mm and M.S.Flat 50 x 6mm ( 101.383 Kg. Approx.)(Galvanized as per IS) 13 Supply of earthing rod sets for 11KV linesmade with MS Rod (Galvanized) 20 mm dia, 3 meter length alongwith GI wire 8 SWG (approx.) total length / weight, 17 meter / 1.64 Kg.) as per latest specification and drawing adopted & approved by NIGAM. 14 Supply of 11 KV Polymer Composite Pin Insulator with pin 15 Supply of Composite Polymer Disc insulators for 11 KV 45 KN “T&C” type 16 Supply of 11KV T & C Type 45 KN Hardware 17 Supply of PG clamps (Rabbit to Rabbitl) 18 Supply of 8 SWG (4 mm dia) GI wire for continuous earthing of 11 KV Line hot dip (Galvanized) 19 Supply of 11 KV Danger plate of size 200 X 250 mm complete in all respect 20 Supply ofGuarding brackets ( 1set = 2 Nos.)per span of 11 KV made of M.S. Angle 65X65X6 mm with clamps made of Flat 50x6, using Eye Hook 300X16 mm (75% Thread with Nut of Suitable Size) (galvanized) 21 M.S. Angle (2x1.83 M),65X65X6mm, 10.614X2=21.228 Kg (Approx) (1set= 2 Nos) 22 Clamp of M S Flat 50x6 mmusing Eye Hook 300X16 mm (75% Thread with Nut of Suitable Size) (1set= 2 Nos) (2.218*2= 4.436 Approx) 23 G I Wire 8 SWG,68 Mtr, 6.66 Kg 24 Supply ofM.S.Channel 100 x 50X6 (for cut point) 2 Nos. x 1.3 meter long with pilot patti 50 x 6 mm thick on single support/pole/lattice structure & necessary clamps, nut & bolts etc. (29.5Kg. Approx.).(Galvanized as per IS) 25 Supply of M.S. Nuts & Bolts (Galvanized) of assorted size 26 A-(2) 11 KV UG 3CX185 Sqmm XLPE Cable at emanating point of GSS to avoid ROQ (100 meter single circuit each) 27 Supply of PCC Poles 9 mtrs (200 Kg) 28 Supply of11 KVdouble pole line structure set for cut point complete

Contact Information