Tender For Providing LWSS Andrana Bandhan under JJM in Tehsil Jaisinghpur Distt. Kangra, H.P. (SH:- C/O percolation well 6.00 Meter dia and 14.00 Meter deep at village Kangain- 1 Earth work in foundation for digging well in dry excavation from gravel level upto the level where well curb is placed, including disposing of soil within allradius and filling space outsidethe well after completion from N.S. level to 1.5 meters depth in all kind of soil such as pick work,jumper work, blasting work Soft/hard Rock chiseling work Soft/hard Rock(where blasting is prohibited) complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. 2 Wet well sinking in gravel including all pumping, shoring etc.complete in all respect. 3 From spring level to 3.00 meters below S.L. 4 Exceeding 3 meters, but upto 6.00 meters below S.L. 5 Exceeding 6 meters, but upto 9.00 meters below S.L. 6 Exceeding 9 meters, but upto 12.00 meters below S.L. 7 Exceeding 12 meters, but upto 14.00 meters below S.L. 8 Steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of redlead paint. In beams joists channels, angles, tee, flats with connection plates or angle cleets as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. 9 In Beams Joints ,channels,angles,tees,flats with concrete plates or angle cleets as in main and cross beams ,hip and jack rafters,purlins connected to common rafter and the like with in all leads and liftscomplete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. 10 Lowering steel well curb in the pit and assembling in position in all depthcomplete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. 11 Providing and laying cement concrete1 : 2 :4Mix (1 cement :2 sand :4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcemnt for reinforced concrete work complete in all respect with in all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge . 12 In suspended floor roofs ,landing and shelves and their support.balconies , beams,girders, bressumers and contilever up to floor two level with in all leads and lifts. 13 Columns & pillars , posts and struts [ square rectangular or polygonal in plan.]. Upto floor two level 14 Providing and laying no fine concrete 1:4 (1 Cement:4 stone)aggregate 20mm nominal size) and curing complete in foundation andplinth excluding the cost of form work complete involving all leads and lifts to the entire satisfaction of Engineer-in-charge. 15 Prov.form work with steel plates 3.15mm thick welded with angle iron frame 30 x 30 x 5mm so as to give a fair finish including centring, shuttering,strutting & propping etc. with wooden battens and ballies, height of propping & centering below supporting floor to ceiling not exceeding 4mtr.& removal of same for insitu rainforced concrete and plain concrete work complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge :- 16 Vertical surfaces such as walls ( any thickness ) partition and the like including attached pillasters buttresses, plinth and string courses and the like. 17 Beams, cantilevers, girders & lintels side & sofits of beam ,beam hauncings , cantilevers, bressumers & lintels not exceeeding 1.00 mtrs. Depth in all heights from the floor. 18 Providing, Laying mild or tor steel reinforcement for RCC. Work including bending binding and placing in position complete upto floor two level Tor steel complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. 19 Providing and laying cement concrete1 : 2 :4(1 cement :2 sand :4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcemnt for reinforced concrete work complete in all respect with in all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge . Above NSL/GL 20 Providing200mm wide cast iron rungs with chequered or ribbed non slip surface including fixing in manholes with 200mmx200mmx100mm cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20mm nominal size) complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. 21 Stone Pitching Properly hard packed filling interstices with spalls stone earth with in all leads and lifts complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. 22 Providing corrugated GI Sheet roofing fixed with galvanised iron J or L hooks Bolts and nuts 8mm diameter with bitumen and GI Limpet washers filled with white lead completeexcluding the cost of purlins, raftersand truss(0.63mmThick sheet ) in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. 23 Providing ridges or hips 60mm over all in plain GI Sheet fixed galvanised Iron J&L hooks, Bolts and nuts 8mm Dia GI Limpet washers filled in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. 24 Supplying and fixing woven plain GI wire fencing of mesh 50mm to 150mm to any type of standard rails strainging bolts etc I/C provision of Binding wire Complete in all leads and lifts in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. 25 15mm thick cement plaster in single coat on the rough side of brick/concrete /stone walls etc. interior plastering upto floor two level including arrises internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:3(1cement:3sand) in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. 26 Painting two coats(excluding priming coat) on previously steeland other metal surface with enamel paint, brushingto give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping ready mixed paint other than white in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.
|