Request For Quotation Jacket Insulated For Special Contingent in Kazakhstan

Work Detail

Gost 29335-92. A Jacket Insulated From Green Fabric For Women With Water -Repellent Trim. A Jacket Of A Direct Silhouette, Elongated With A Central On -Board Fastener On The Plastic Lock Lightning. A Windproof Bar Is Fastened With A Bastard Braid. The Fastener Of The Jacket On The Lightning Castle Can Be Replaced With Buttons In The Amount Of 5-7 Pieces, Depending On The Growth Of The Product. A Pocket With A “Window” For The Full Name Is Sewn On The Right Shelf On The Chest. Convicted By Entrance From Left To Right, The Size Of The “Window” Is 5*8 Cm. The Back With A Flirt, Seam In The Middle. On The Back At The Flirt Level, A Retroreflective Braid Of 2.5 Cm Wide Is Set Up. On The Lining Along The Waist Line, A Backstage Is Processed With A Cord With A Diameter Of 5-7 Mm, Tips And Fixators. The Sleeves Are Stack, Two -Sewing. On The Bottom Of The Sleeves, A Reflective Braid Of 2.5 Cm Long At A Distance Of 20-25 Cm From The Bottom Of The Sleeves Is Configured, Knitted Frighttings Are Determined On The Lining Of The Sleeves. The Main Lining Of The Jacket Consists Of Lining Fabric (Or Slam) And Artificial Insulation. For The Southern Region, A Jacket Insulation In One Layer Of 300 G/M2, For The Northern Regions, A Jacket Insulation In One Layer Of 400 G/M2, The Outer Layer Of Insulation Is Fastened With Parallel Lining With Lining Fabric. The Collar Of The Jacket Is Weighing, Delayed. According To The Elbow Seam, Along The Middle Seam Of The Back, The Seam Of The Scooter Of The Back, The Shoulder Seam, A Finishing Line Is Laid On The Collar Of 0.5-0.7 Cm. Top Material: Mixture Of Cotton Tissue At Least 30%, Polyester (Pe) No More Than 70% Material Density - 210 G/M2 Lining: Pe Lining Fabric Is 100% Or Calico Warming: Artificial, Synthetic (Synthetic Winterizer 100 G/M2, 200 G/M2, 300 G/M2), Pe 100%. Marking - A Commodity Label Fixed In The Side Seam Of The Jacket Indicating The Manufacturer, The Name Of The Product, The Designation Of Technical Conditions, Gost, Growth And Size Of The Product, Stamp With The Release Date And Quantity. Packaging - Packing In Plastic Bags Indicating The Name Of The Product, Manufacturer.

Contact Information