|
Re Tender For Supply, Installation, Commissioning And Validation Of Cgmp Model Pure Steam Generation (Psg) And Distribution System , Supply, Installation, Commissioning & Validation Of Cgmp Model Pure Steam Generation (Psg) & Distribution System At M/S. Homco, Valiyakalavoor Pure Steam Generation Plant - Capacity 100Kg/Hr , Pure Steam Generation Plant - Capacity 100Kg/Hr Psg Column Psg Preheater Non Condensable Gases Remover (Ncgr) Sampling Condenser Insulation Sight Glass/View Glass Vent Filter Vent Filter Catridge Pumps Valves & Instruments Ss 304 Skid With Interconnecting Piping Plc Based Control Panel For Online Process Instruments Sensors, Pumps, Flow Diversion Valves With Appropriate Synchronized In Ss304 Enclosure Panel. On Site Installation And Commisioning Charges, Documentation -Dq,Iq&Oq With Training , Pipes & Pipe Fittings For Pure Steam Loop System Ss 316L Pipe Stainless Steel Bead Removed Tubes Of Schedule 40 (Wall Thickness Around 1.6Mm), Material Shall Be As Per Astm A 270 Tp 316L Erw , Internal Finish Shall Be Electro Polished To Better Than 0.5 Ra & Externally Mirror Polished To 180 Grit , Size- 1.0"Od , Size- ¾” Od , Size- ½” Od , Pipes & Pipe Fittings For Pure Steam Loop System Ss 316L Elbow Of Schedule 40 (Wall Thickness Around 1.6Mm), Made Out Of Astm A270 Tp 316L Tube Bead Removed Wall Thickness To Match With Respective Pipe Wall Thickness. Internal Finish Shall Be Electro Polished To Better Than 0.5 Ra Astm A270 Tp 316L Erw & Externally Mirror Polished To 180 Grit , Size- 1.0"Od , Size- ¾” Od , Size- ½” Od , Pipes & Pipe Fittings For Pure Steam Loop System Ss316l Tee Of Schedule 40 (Wall Thickness Around 1.6Mm), Made Out Of Astm A270 Tp 316L Tube Bead Removed Wall Thickness To Match With Respectivepipe Wall Thickness. Internal Finish Shall Be Electro Polished To Better Than 0.5 Ra Astm A270 Tp 316L Erw & Externally Mirror Polished To 180 Grit Size - ¾” , Pipes & Pipe Fittings For Pure Steam Loop System Ss316l Unequal Tee Of Schedule 40 (Wall Thickness Around 1.6Mm), Made Out Of Astm A270 Tp 316L Tube Bead Removed Wall Thickness To Match With Respective Pipe Wall Thickness. Internal Finish Shall Be Electro Polished To Better Than 0.5 Ra Astm A270 Tp 316L Erw & Externally Mirror Polished To 180 Grit , Size - 1” X ½” , Size - 1” X ¾” , Pipes & Pipe Fittings For Pure Steam Loop System Ss316l Reducer Of Schedule 40 (Wall Thickness Around 1.6Mm), Made Out Of Astm A270 Tp 316L Tube Bead Removed Wall Thickness To Match With Respectivepipe Wall Thickness. Internal Finish Shall Be Electro Polished To Better Than 0.5 Ra Astm A270 Tp 316L Erw & Externally Mirror Polished To 180 Grit Size - ¾” X ½” , Pipes & Pipe Fittings For Pure Steam Loop System Tc Gasket , Moc Ptfe , Size- 1.0"Od , Size- ¾” Od , Size- ½” Od , Pipes & Pipe Fittings For Pure Steam Loop System Tc Clamp, Moc : Ss304 , Standard : Astm A270 , Size- 1.0"Od , Size- ¾” Od , Size- ½” Od , Pipes & Pipe Fittings For Pure Steam Loop System Tc Liner, Moc : Ss316l , Size- 1.0"Od , Size- ¾” Od , Size- ½” Od , Pipes & Pipe Fittings For Pure Steam Loop System Ht Class Nitrile Rubber Insulation Up To 150 Degree C , Size- 1" , Size- ¾” , Size- ½” , Pipe In Pipe Insulation For Pou Size- ¾” X 2.5” Od , Pipes & Pipe Fittings For Pure Steam Loop System Ss 304 Pipe Holding Clamp , Size- 1.0"Od , Size- ¾” Od , Size- ½” Od , Standard Support (Ss 304)- Size -100 Mm , Ss 304 Studs Size- 100 / 50 Mm , Ss Anchor Bolt / Panel Bolt, Size- M10×75Mm , Ms Square Plate,Size-100×100×5Mm , Ms Anchor Bolt Size-M10×75Mm , Ms Angle, Size-40 × 40× 6 Mm , Insulation Tape, Size- 3/4" X 3.0" Od , Pipes & Pipe Fittings For Pure Steam Loop System Manual Diaphragm Valve Type: Two Way Manual Diaphragm Valve , Moc: Ss 316L (Base), Moc Of Diaphragm: Ptfe Backed With Epdm, Operation: Manually Operated, Operating Pressure: Up To 16 Bar, End Connection: Tc End, Location: Inlet & At Condensate Drain Line Of Header & Pou , Size- Dn15 , Size- Dn20 , Size- Dn25 , Actuated Diaphragm Valve For Vent Filter Isolation : Type: Two Way Actuated Diaphgram Valve, Moc: Ss 316L (Base), Moc Of Diaphragm: Ptfe Backed With Epdm, Operation: Pneumatically Operated, Operating Pressure: Upto 16 Bar, End Connection: Tc End, Location: For Vent Filter Isolation Size- Dn 15 , Vent Filter With Accessories : Type: Electrically Heated Insulated & Cladded, Moc: Ss 316L, Temperature Sensor: Pt 100, 3 Wire, Heater Make: Hot Watt, End Connection: Tc End, Accessories: Temperature Sesnsor With Transmitter, Make: Radix Size- 10" Long , Vent Filter Catridge : Type: Hydrophobic, Moc: Pp/Ptfe, Size: 10" Long, End Connection: Code-7, Location: Inside The Vent Filter Size- 0.2 Micron , Pressure Gauge : Type: Bourdon Type, Moc: Ss 316L, Range: 0 To 10 Kg/Cm2(G), Sensing Elemen: Bourdon Gauge, End Connection: Tc End, Marking: White Background With Black Marking, Location: Pure Steam Inlet Size- 4" Dial Size , Pressure Switch : Range: 0.2 To 3.0 Bar, Contact System: Single Pole Changeover Switch (Spdt), Moc: Ss 316, Power Supply: 24 Vdc, Enclosure: Ip 66, End Connection: Tc End With Diaphragm Seal Size- 0.2 To 3.0 Bar , Temperature Sensor Cum Transmitter : Moc: Ss 316L, Model: Pt100, 3 Wire Type, Size: 1/2" Bsp, Length: Approx. 50 Mm, End Connection: Tc End, Location: In Pure Steam Line After Vent Filter, Temperature Range: 0 To 200 °C Size- 0 To 200 °C , Clean Steam Trap For Condensate Removal : Moc: Ss 316L, Location: At Condensate Drain Line, End Connection: Tc End Size- Dn15 , Pipes & Pipe Fittings For Pure Steam Loop System Closed Head Orbital Welding Joints , Size- 1.0"Od , Size- ¾” Od , Size- ½” Od , Hydro Testing Size- 1’’,3/4’’,1/2’’ , Passivation Size- 1’’,3/4’’,1/2’’ , Boroscope Inspection (10% Only) Size- 1’’,3/4’’,1/2’’ , Pipe Erection /Laying Of Piping Per Inch Meter , Size- 1.0"Od , Size- ¾” Od , Size- ½” Od
|
