Tender For Supply, Installation, Testing & Commissioning Of Mgps And Mot Work For Phase-Ii Of Hospital Build ... in India

Work Detail

Tender For Supply, installation, testing & commissioning Of Mgps And Mot Work For Phase-Ii Of Hospital Building At Karauli - 1 MEDICAL OXYGEN SYSTEM 2 SITC of Oxygen Manifold System (16+16) with tail pipes NRV -manifold system comprise of bank of 16+16 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 32 no"s non return valves & 32 no"s high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag make CE Approved/CE certified Note : Providing of Cylinders is in the scope of Hospital / End Client. 3 S/1/T/C of Fully Automatic Oxygen Control Panel, as per HTM-2022/02-01 of UK NFPA99C of USA as per enclosed technical specifications - (Imported)(European CEwith4 digit notafied body no / UL Listed) 4 SITC of Oxygen emergency system - Emergency manifold system comprise of bank of 6+6 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe ofsize 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 12 no"s non return valves & 12 no"s high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag. One High pressure Imported and approved make Double gauge regulator with manual pressure setting option and showing cylinder and line pressure make CE Approved/CE certifiedNote : Providing of Cylinders is in the scope of Hospital / End Client. 5 S/1/T/C of Oxygen Outlets(imported) as perHTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed 6 S/1/T/C of Oxygen probes (imported) as perHTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed 7 SITC of BPC (back pressure compensated) flow meter with humidifer made of nickel plated body , double jacketed with flow gradations marked on it . Desired flow will be setteled through rotary knob . Flow range should be between 0 to 15 1pm & work should be executed as per direction of engineer in charge . 8 MEDICAL NITROUS OXIDE SYSTEM 9 SITC of Nitrous Oxide Manifold System (4+4) with tail pipes NRV - manifold system comprise of bank of 4+4 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 8 no"s non return valves & 8 no"s high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag make CE Approved/CE certified Note : Providing of Cylinders is in the scope of Hospital / End Client 10 S/1/T/C of Fully AutomaticN20 ControlPanel,asper HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported)(European CEwith4 digit notafied body no / UL Listed 11 SITC of Nitrous Oxide emergencysystem - Emergency manifold system comprise of bank of 1+1 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 2 no"s non return valves & 2 no"s high pressure flexible tailpipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag. One High pressure Imported and approved make Double gauge regulator withmanual pressure setting option and showing cylinder and line pressure make CE Approved/CE certifiedNote : Providing of Cylinders is in the scope of Hospital / End Client. 12 S/1/T/C ofN20 Outlets (imported)asperHTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) European CE with 4 digit notafied body no / UL Listed 13 S/1/T/C ofN20probes (imported)asperHTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) European CE with 4 digit notafied body no / UL Listed 14 MEDICAL COMPRESSED AIR SYSTEM 15 S/1/T/C of Air Compressorwith Compressedairplantcomplete pacakage unit total capacity 6000 LPM (imported) - as perHTM2022/02-01/ NFPA99C as per enclosed technical specifications (European CE with 4 digit notafied body no / UL Listed 16 S/1/T/C of Air-4 Bar Outlets as perHTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed 17 S/1/T/C of Air-4 Barprobes, as perHTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed 18 SIIITIC of Air-7 Bar Outlets , as per HTM-2022102-01 of UKINFPA99C of USA as per enclosed technical specifications-(Imported)(EuropeanCE with4 digit notafied body no / UL Listed 19 SIIITIC of Air-7 Bar probes, as per HTM-2022102-01 of UKINFPA99C of USA as per enclosed technical specifications-(Imported)(EuropeanCE with4 digit notafied body no / UL Listed 20 MEDICAL VACCUM CENTRALSYSTEM 21 S/I/IT/C of Vacuumcentralsystemwithpump only completepacakage unit total capacity 9000 LPM (imported) - asperHTM2022/02-01/ NFPA99C as per enclosed technical specifications and list of approved makes (European CEwith4 digit notafied body no / UL Listed 22 SIIITIC of Vacuum Outlets,as per (imported)HTM-2022102-01ofUKINFPA99C of USA as per enclosed technical specifications - uropean CEwith4 digit notafied body no / UL Listed 23 SIIITIC of Vacuum probes,as per (imported)HTM-2022102-01ofUKINFPA99CofUSAasperenclosed technical specifications - European CEwith4 digit notafied body no / UL Listed 24 SITC of suction unit (Suction Controller and Collection Jar) with posibility to configure required capacity capacity collection Jar and should meets the requirements as per BSEN ISO 100793:2009. The unit must designed to operate with the vaccum line of MGPS. The collection Jar must accumpained with Vaccum regulator suitable for 0-14.7 psig with flow rate 0-55 Lmp (min) for operating temperature - 18°C to 50°C with ON/OFF facility. The collection Jar should be transparent, made of high quality polycarbonate that can be autoclaved at 121°C for 20 minutes for reuse and provided with auto stop to avoid over spill and contamination of the suction source when the jar collection reached optimized level. The complete unit supplied with filter to protect the source and pipe line from bacterial contamination. 25 600 m1 Capacity collection Jar 26 Supply, Installation, testing & commissioningofTheatreVacuum Unit (2 jar nos capacity 2000 Ml)( Imported) European CEwith4 digit notafied body no 27 SITC of MGPS of medically grade as per BSEN-13348 with third party certification from Lloyds/TUV, degreased (ie free from oil, grease and particulate matters) seamless copper pipe confirming to ASTM B88 and all copper joining done by brazing with AWSA5.8, classification BCuP-5 or BS 1845 following procedure in accordance with ASTM B828 after purging with nitrogen. All pipe cutting shall be carried out with a radial pipe cutter and copper pipe fitting"s shall comply with B4 alloy designation. Adequate support shall be provided while laying pipeline testing shall be done at 17 bar and after testing pipe shall be painted with two coat of enamel paint as per colour codification as per ISO 7396-Part-I 2016. 28 SITC of Valve box made of CRCA sheet duly powder coated with transparent window which is installed in the MGPS for oxygen and vaccumline and should comply with ENIS05211:2001 complete with ball type valves and gauses as required for oxygen compressed air and vaccum line (three gas) 29 For Three gas 30 For Four gas 31 For Five gas 32 SITC of microprocessor based auto alarm system (digital type) suitable for medical gas service provided with audible and visual alarm for MGPS Zoning. It should monitors the current status of oxygen /compressed air pressure in distribution pipeline of central medical supply system and trigger the alarm to alert. The system should comply BSEN ISO:7396-1:2007 33 For Two Gas Services 34 For Three Gas Services 35 For Four Gas Services 36 For Five Gas Services 37 For Six Gas Services 38 SITC of non lubricated ball type GM Isolation Valve with adapter & PTFE Seat having quarter turn handle opening of following sizes suitable for flow capacity 1500 LPM at 4.7 bar with maximum allowable pressure of 30 bar and suitable for working temperature ranging - 20°C to 130°C.Valve should be CE approved/ CE certified. 39 For 12 MM OD pipe 40 For 15 MM OD pipe 41 For 22 MM OD pipe 42 For 28 MM OD pipe 43 For 42 MM OD pipe 44 For 54 MM OD pipe 45 SITC of Bed Head Panel of 1200 -1500 MM long made out from high strength extruded aluminium with powder coating with 4 nos 6/16 Amp switch socket and provision forfour Nos gas outlet point work should be executed as per directions of engineer in charge and of CE certified makes. 46 SITC of Bed Head Panel of 1800 -2400 MM long made out from high strength extruded aluminium with powder coating with 6 nos 6/16 Amp switch socket and provision forfour Nos gas outlet point work should be executed as per directions of engineer in charge and of CE certified makes. 47 P&F of Bed Panel accessories likeMonitor Tray, Utility Basket, Vacuum Slider, Infusion Pump Pole with IV hooks, with proper nut bolts and screw and with proper finishing & work should be executed as per directions of engineer in charge of CE certified/ CE Approved . 48 Monitor Tray 49 Utility Basket 50 Vacuum Slider 51 Infusion Pump Pole 52 Sub: Modular Operation Theater 03Nos 53 S/1/T/C of SS 304sandwitch puf panel Walls and ceiling for of Operating Area as per tender technical specification enclosed 54 S/1/T/C ofpaintas pertender technical specification enclosed 55 SITC of recess mounted cleanroom flat LED panel of 595 x 595 mmsize as per specifications 56 S/1/T/C of Touch Surgeon control panel, mounted flush in the theatre wall, complete set with electrical Distribution Board, as per enclosed tender technical specifications (Imported). 57 S/1/T/C of Twin Plate X-ray viewing Screendesigned toprovide a high level of control luminance without flicker. Size:- 1000x700x95 Deep, indigenous, complete set as per enclosed tendertechnical specifications. (Indian) 58 S/1/T/C ofSeamlessflooringwith perfectlycurvedfish-covings resistance to mechanical stressanddynamicloadandhaving Electro static discharge (ESD) I (anticonductive) protection characteristics 2 mm thick, washable- complete. As per enclosed tender technical specifications. (Imported) 59 S/1/T/C of Pass Box, Hatch should be provided in each Operation Theatre to remove waste materials from the operation theatre to the dirty linen area just adjacent to operation theatre- as per technical specification (Indian) 60 S/1/T/C of ScrubSink-3 bay-madein Stainlesssteel304 Finish, having Sensor & Foot Operated with Thermostatic Mixing valve control to Size maintain the water temperature,Indigenous complete set, as per enclosed tender technical specifications.(lndian 61 S/1/T/C of Automatic Sliding door, Complete with Automation Unit, frame, viewing window. complete set, as per enclosedtendertechnical specifications. (extruded aluminium) (Indian) 62 Each2100mmx 1500mm(height xwidthofdoor frame)Automatic 63 Each2100mmx 1000mm(height xwidthofdoor frame)Automatic 64 S/1/T/C of LED OT light European CE Certified/UL listed/US FDA as per technical specifications.(imported) 65 S/1/T/C ofcamera for OT lightas per technical specifications.(imported) 66 S/1/T/C of Flat panel monitor as per technical specifications.(imported) 67 S/1/T/Cof Single Arm Pendant with 1000mm long horizontalarm with both horizontal and vertical movemen,imported,asperCE Certified / UL Listed, complete set, as per enclosed tender technical specifications. (Imported) 68 S/1/T/C ofDoubleArmpendantwith1000mm+800mmlong horizontal arms with both horizontal and vertical movement , imported, as per CE Certified/ UL listed, complete set as per enclosed tender technical specifications. (Imported) 69 S/1/T/C of writing board, indigenous,completeset as perenclosed tender technical specifications. (Indian) 70 S/1/T/C of PRD , indigenous,completeset as perenclosed tender technical specifications. (Indian) 71 S/1/T/C of Storage Unit , indigenous,completeset as perenclosed tender technical specifications. (Indian) 72 SITC of : Isolation Panelsystem with insulation monitoring andinsulation fault location floor mounted dust and vermin proof (IP30) compartmentlaized cubical type 10 KVA medical isolation panels shall comfirm to following IEC statndard IEC 60364-7-710, IEC 61439-1 and -2, IEC 61557-8, IEC 61558-2-15 (IEC test certificate to be attached with panel) .The panel shall be fabricated out of 14 gauge CRCA sheet steel required hardware duly treated throgh 7 tank process for derusting. The panel door shall have trnsparant inspection window. The panel shall have following 1 no 10 KVA isolation transformer, 1 no Insulation monitor suitable for all outgoings, 1 no 63 Amp 10 KA 2 pole MCB, 12 nos 16/20 Amp 2 pole C curve MCB, all required suitable rating current transformer for incomer & outgoing, 1 no digital voltmeter & ammeter, suiatble for monitoring insulation fault, transfomer fault, insulation fault location. The panel shall be capable to perform insulation test. The Insulation monitor & fault locator should have inbuilt RS485 communication protocol. Panel shall be capble of detecting overheating of cables inside the OT isolation panel and sending alarm as well as alart over BMS. including making necessary connection etc complete in all respect 73 SITC of 10 KVA 1 Phase Input, 1 Phase Output advance DSP controlled UPS with IGBT based rectifier, LCD display, double conversion / Digital Signal Processing UPS, with full load 30 minute battery back up, with required cabling for incoming & outgoingconnection of as per enclosed technical specifications

Contact Information