Tender For Constructing Anganwadi Building No. 1 At Borwati Tq Latur For The Year 2024-25 - Excavation For F ... in India

Work Detail

Tender For Constructing Anganwadi Building No. 1 At Borwati Tq Latur For The Year 2024-25 - Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By manual means Spec. No. Bd.A.1 Page No. 259SSR ITEM NO. 21.01 & PAGE NO.153 2 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) (SSR item no.21.06 p.no.153) 3 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand Spec. No. Bd. E. 1 Page No. 287 SSR ITEM NO. 24.01 & PAGE NO.131 4 Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.Bd.F.3 Page No. 298 and B.7, Page No.38SSR ITEM NO. 25.11 & PAGE NO.133 5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.Bd.F.5 Page No. 300 and B.7, Page.No. 38 SSR ITEM NO. 25.31 & PAGE NO.134 6 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.Bd.F.6 Page No. 300 and B.7, Page No.38 7 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.Bd.F.8 Page No. 302 and B.7, Page No.38 8 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec.No.Bd.F.9 Page No. 303 and B.7, Page No.38 9 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Spec.No.Bd.F.17, Page No. 306 10 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Spec.No.Bd.G. 1 Page No. 313 SSR ITEM NO. 27.01 & PAGE NO.144 11 Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete. Spec. No.Bd.A.11 Page No. 263SSR ITEM NO. 21.37 & PAGE NO.117 12 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Spec.No.Bd.G.5 Page No. 315 SSR ITEM NO. 27.05 & PAGE NO.144 13 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.Spec.No.Bd.G.7 Page No. 316SSR ITEM NO. 27.06 & PAGE NO.144 14 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Spec.No:- Bd. L.2 Page No. 368 15 Providing internal cement plaster 20 mm thick in two coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc completeSpec.No:- Bd.L.4 Page No. 368 16 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring Spec.No. :Bd.M.12 Page No. 385 17 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting Spec.No. :Bd.M.12 Page No. 385 18 Providing and laying Matt finish ceramic tiles having size 30 cm x 30 cm confirming I.S.15622/2006 (group D II-A)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. Spec.No.Bd.M.12 Page No. 385. SSR ITEM NO. 33.24 & PAGE NO.158 19 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Spec. No.Bd.M.13 Page No. 386. SSR ITEM NO. 33.25 & PAGE NO.158 20 Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Spec. no.As directed by Engineer in charge. (SSR It No.32.34 page N0.212 ) 21 Providing and fixing frame with / without ventilator of size as specified with Country cutNON teak woodfor doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete Spec.No:-As directed by Engineer in charge.Spec.No. As directed by engineer in charge (S.S.R. Item No.39.02 P.No.245) 22 Providingand fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete..No:- Bd.T-34 Page No.499 SSR ITEM NO 39.09 P.NO 246 23 Providing and fixing steel window C.R.C. sheet as per I.S. 1513 : 1986. gauge sect. 65 x 40 x 25 mm shutter single sheet of 24gauge single leaf joined by fusion welding at appropriate points with vertical grooves of 15 mm wide and 15 mm deep at a distance of 45 mm. The first and last rib should be 60 mm away from vertical edge of the shutter. the shutter shall be welded, with angle to from the periphery of the shutter. At the center of the frame there shall be angle welded to bifurcate the frame into segments with two leaf shutter square 12 mm square guard bars at 120 mm center with all accessories Spec.No.:- as directed by engineer incharge ITEM NO. 39.21 & PAGE NO.247 24 Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain / obscured glass pans and approved type quality and iron oxidized fixtures and fastening with guard square bars 12 mm10 cm c/c and oil painting two coats etc. complete. Spec.No.Bd. T. 53, Page No. 509 and As directed by Engineer in charge.SSR ITEM NO. 39.30 & PAGE NO.249 25 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Spec. No. As directed by engineer incharge ( SSR Item No.35.21P. No.225) 26 Providing and applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. Spec.No.Bd.P.5 Page No. 413SSR ITEM NO. 36.11 & PAGE NO.227 27 Provinding and applying two coats of water proof cement paint of approved manufacture and approved colour to new plastered surfacesincluding scaffolding if necessary, cleaning and preparingthe surface watering for two days complete. Spec. No. :Bd.O. 8 Page No. 406( S.S.R. I.No.35.13 Page No.224 ) 28 Providing and applying two coats of lead/zinc base oil paint/bituminous paint of approved colour and shade to new STRUCTURAL STEEL WORK AND IRON WORK IN BUILDING including preparing the surface, knotting, scaffolding if necessary, excluding primer coat etc. complete. SPec.No.Bd.O. 1 Page No. 403SSR ITEM NO. 35.04 & PAGE NO.224 29 Providing and fixing Orissa type white glazed earthen ware 575 mm water closet pan including S trap with earthen ware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. Spec.No. As directed by engineer incharge (SSR item no.42.30 P.No.277 ) 30 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.Spec.No. As directed by Engineer in chargeSSRITEM NO. 42.52 & PAGE NO.279 31 Providing and fixing white glazed earthenware Wash Hand Basin of 55 cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. making good the damaged surface, testing etc. completeSpec.No. Bd.V. page No.565 ITEM NO. 41.63 & PAGE NO.272 32 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 litersSpec.No. as directed by engineer incharge. ( SSR ITEM NO. 42.53 & PAGE NO.280) 33 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec.No.BD.V 5 page 551 and as directed by Engineer in charge ( SSR ITEM NO. 42.56 & PAGE NO.280) 34 Providing and fixing 15 mm dia. Screw down bib / stop tap of brass including necessary socket union nut complete ( Spec. No.Bd.V.8 Page No. 554) ( SSR Item No.41.40 P.No.270 ) 35 Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish ( Spec. No.Bd.M.35 B/ P. No.393)(SSR item no.33 .32 P.No.216) 36 Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. Spec. No.Bd.V.45 Page No. 575 ( SSR ITEM NO. 42.19 & PAGE NO.275) 37 Royalty charges for material +2 % Surcharge.B)ROYALTY CHARGES FOR OTHER MINERALS 38 Laboratory Testing Charges A) Compressive Strength of C.C. Cube (Set of 3 Cubes) 39 B) Compressive Strength of BRICKS 40 ADD 18% FOR GOODS AND SERVICES TAX 41 ADD 0.50 % FOR LABOUR INSURANCE

Contact Information