|
Tender For Work Of Box Culvert At Km 5 Of Meerut-Badaut Road From Km 21 Via Kalyanpur To Puramahadev Marg To Kinauni Mill - Dismantling reinforced cement concrete including stacking of materials as dericeted by engineer inchargewithin a distance of 60 meters.al as per s.i.no.694. Including all texes, labour, machnery but excluding G.S.T 2 Dismantling of brick worksincluding stacking of materials as dericeted by engineer inchargewithin a distance of 60 meters.al as per s.i.no.692. Including all texes, labour, machnery but excluding G.S.T 3 Removal of unserviceable soil including excavation,loading and disposal up to 1000 meters lead but excluding replacement by sutiable soil which ahall be paid separately as perclause 305 Including all texes, labour, machnery but excluding G.S.T 4 Excavation in foundation in ordinarysoil (Loam, clay or sand) including lift upto 1.50 mand lead upto 30 M and including filling watering and ramming of excavated earth into the trenches and removal and disposal of surplusearth as directed by the Engineer in Charge up to distance 30m. SI No. 251(a) Including all texes, labour, machnery but excluding G.S.T 5 Plain Cement Concrete in Open Foundation using batching plant, transit mixer & manual placing complete as per Drawing and Technical Specifications.(M-15) Including all texes, labour, machnery but excluding G.S.T 6 Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. Including all texes, labour, machnery but excluding G.S.T 7 Plain/Reinforced Cement Concrete in foundation & super structure using batching plant transit mixer & manual placing complete as per Drawing and Technical Specifications. (M-20) Including all texes, labour, machnery but excluding G.S.T 8 Reinforced Cement Concrete in open foundation using batching plant transit mixer & manual placing complete as per Drawing and Technical Specifications. (M-25) Including all texes, labour, machnery but excluding G.S.T 9 Reinforced Cement Concretefor wall & slab etc. using batching plant transit mixer & manual placing complete as per Drawing and Technical Specifications. (M-25) Including all texes, labour, machnery but excluding G.S.T 10 Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. Including all texes, labour, machnery but excluding G.S.T 11 M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.As per UPPWD SOR no 504 Including all texes, labour, machnery but excluding G.S.T 12 Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm.Including all texes, labour, machnery but excluding G.S.T 13 Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per centbitumen by weight. Including all texes, labour, machnery but excluding G.S.T 14 Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications. Including all texes, labour, machnery but excluding G.S.T 15 Supply & Fixing of 100 mm dia Drainage Spouts of MS with gratings as per drawing including cost of all materials, labour, T & P etc. required for proper completion of the workas per drawing and Technical specification Including all texes, labour, machnery but excluding G.S.T 16 Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 80 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications Including all texes, labour, machnery but excluding G.S.T 17 Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification & MORTH 710.1.4.of IRC:78 & 2200. Including all texes, labour, machnery but excluding G.S.T 18 Concrete with 4 cm. gauge Stone ballast, fine sand of 1.25 FM and cementin proportion of 8:4:1 in foundation including supply of all material labour ,tools,and plants etc. required for proper completion of work. (SI No. 273) Including all texes, labour, machnery but excluding G.S.T 19 Supply & Laying of Hume pipe (1000 mm dia)Supply & Laying of Hume pipe (1000 mm dia) in position including labour and T&P etc. requiredfor proper completion of the work.As per SOR 10.27, New item (ii) Including all texes, labour, machnery but excluding G.S.T 20 Fixing of joints in hume pipe (1000 mm dia)Fixing of joints in hume pipe (450 mm dia) with juit and cement etc.including cost of all matrial labour and T&P etc. requiredfor proper completion of the work. As per SOR , New item (i) Including all texes, labour, machnery but excluding G.S.T 21 Construction of embankment/Patri with approved material obtained from borrow pits with all lifts (Distance 2 km) and all leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Ref. to Mort&H S Including all texes, labour, machnery but excluding G.S.T 22 M-150 brick on edge pavement on patries laid dry jointsfilling with local sand including prepration of base to proper slope and its ramming spreading layer of 1cm.of local sand over the sub grade including supply of all materials labour T&P etc.proper complitation of the work.S.I.763 Including all texes, labour, machnery but excluding G.S.T 23 Construction of embankment/Patri with approved material obtained from borrow pits with all lifts (Distance 2 km) and all leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Ref. to Mort&H S Including all texes, labour, machnery but excluding G.S.T 24 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete .As per ReferencetoMORT&H Specification 401SN. 4.01 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST. 25 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density..As per ReferencetoMORT&H Specification 406SN. 4.14 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST. 26 Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70to 1.00 kg/sqm using mechanical means.As per ReferencetoMORT&H Specification 502SN. 5.10Rates are including all labour, material, T&P, taxes & labour cess but excluding GST. 27 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. Including all texes, labour, machnery but excluding G.S.T 28 Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregatesusing Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades. Including all texes, labour, machnery but excluding G.S.T 29 Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade.Case - II : Type C Including all texes, labour, machnery but excluding G.S.T
|
