|
Providing Rates For Supply/Fixing Of Various Items As Per Bill Of Quantity For Meerut Mandal - Supplying, fabricating, transporting, hoisting and fixing in position good quality of 70 mm mirzapur pink sandstone in various elements for all levels. Stone shall be free from cracks, lines stains and even in shade for each element. The The stone shall be fine grained and reddish or buff-colored (locally available). The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), CNC cutting, moulding. The carving and molding work shall be of very good quality. The stones to be fixed in line, level and plumb in all respect with the use of brass clamps, pins, (to be paid separetely) dowels, cement slurry with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete or approved make as required and as approved by the Architects. Supplying, fabricating, transporting, hoisting and fixing in position good quality of Mid Ornamental sandstone in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings, carvings as required, the stone of varied thickness shall be used for stacking. Also includes the cost of structural load calculation and design with respect to the drawing recevied from architect in charge. Preferable tentative size 5MX2.5MX450MM OR tentative Size as approved from architect in charge Supplying, fabricating, transporting, hoisting and fixing in position good quality of Ornamental sandstone statue in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings, carvings as required, the stone of varied thickness shall be used for stacking. Also includes the cost of structural load calculation and design with respect to the drawing recevied from architect in charge. Preferable tentative size 1.5MX1.5MX1.5 M tentative Size as approved from architect in charge Supplying, fabricating, transporting, hoisting and fixing in position good quality of sandstone BRACKET in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings, carvings as required, the stone of varied thickness shall be used for stacking. Also includes the cost of structural load calculation and design with respect to the drawing recevied from architect in charge. Preferable tentative sizeas approved from architect in charge Supplying, fabricating, transporting, hoisting and fixing in position good quality of Ornamental sandstone Jharokha in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings, carvings as required, the stone of varied thickness shall be used for stacking. Also includes the cost of structural load calculation and design with respect to the drawing recevied from architect in charge. Preferable tentative size 0.35 MX0.2 MX0.2 M tentative Size as approved from architect in charge Providing and laying 80 mm thick machine cut cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. Providing & fixing Cobble Stone Flooring (10X10X10)cm filling of joints in 1:3 Cement mortar with matching colour pigments all complete specification & direction of Engineer in charge. "Supply and fixing of TG RO43 BETA, powder coated Tree guard as per design approved by Architect in charge with the following specifications: The unit is in powder form, packed in a 5Kg drum for secure handling and transportation. The product features a cylindrical design made of mild steel, with a color-coated green finish for durability and corrosion resistance. It has an opening size of 2 inches, a mesh number size of 11-50, and measures 5 feet in height. The structure includes 3 legs with 4 ties for enhanced stability during use. Weighing 3.5 kg, the item is lightweight yet sturdy, ensuring easy handling and installation. It is made from galvanized material, adding to its longevity and resistance to environmental factors." Supplying, fabricating, transporting, hoisting and fixing in position good quality of Ornamental sandstone statue in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings, carvings as required, the stone of varied thickness shall be used for stacking. Also includes the cost of structural load calculation and design with respect to the drawing recevied from architect in charge. Preferable tentative size 1.2MX0.6MX0.6 M tentative Size as approved from architect in charge Supplying, fabricating, transporting, hoisting and fixing in position good quality of Ornamental red sandstone Jharokha in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings, carvings as required, the stone of varied thickness shall be used for stacking. Also includes the cost of structural load calculation and design with respect to the drawing recevied from architect in charge. Preferable tentative size 0.5MX0.3MX0.75M tentative Size as approved from architect in charge Supplying, designing, fabricating, transporting, hoisting and fixing in position mural works in good quality of 70 mm Red sandstone, and 18mm marble insertion and 6-10mm powder coated MS sheet in various elements for all levels. Stone shall be free from cracks, lines stains and even in shade for each element. The stone shall be fine grained and reddish or buff-colored (locally available). The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), CNC cutting, moulding, etching, buffing and polishing. The carving and molding work shall be of very good quality. The work to be fixed in line, level and plumb in all respect with the use of brass clamps, pins, (to be paid separetely) dowels, cement slurry with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete or approved make as required and as approved by the Architect in charge. Supplying, designing, fabricating, transporting, hoisting and fixing in position mural works in good quality of 70-100 mm Sandstone, of desired shade and multistone insertion of approved thickness (Marble/Granite/Italian of any shade etc.) and 6-10mm powder coated MS sheet in various elements for all levels. Stone shall be free from cracks, lines stains and even in shade for each element. The stone shall be fine grained and reddish or buff-colored (locally available). The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), CNC cutting, moulding, etching, buffing and polishing. The carving and molding work shall be of very good quality. The work to be fixed in line, level and plumb in all respect with the use of brass clamps, pins, (to be paid separetely) dowels, cement slurry with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete or approved make as required and as approved by the Architect in charge. Resting Areas for Tourist (Benches) {MR} "Providing & fixing of high ornamentation red Sandstone/MS bench size 1500mm length and 650mm and height 450 mm of thickness 200mm base slab with vedic and traditoinal pattern ornamentation including foundation & support with all necessary T&P etc all complete as per design of direction in engineer/ Architect in charge. Urban Litter Bins " Providing & fixing of stone Dustbin size 487 x 399 x 1138 fixing on a foundation with base plate and wrapped with red sandstone from all sides of 75mm with all complete as per design of direction in engineer/ Architect in charge. "Providing and fixing StandAlone Signage in Marble of approved thickness with powder coated 10-12mm MS letters and illustration at desired locations with letters (in english, hindi and Braille)- etched, through cut, infilled or painted, also including the cost of design, fabrication and onsite installation with all the necessary accessories and equipments for fixing on any surface as per drawing and design approved from Architect in charge English: Helvetica Font with min. 36 size Hindi: Krutidev Font with min. 36 size Signage-A" Signage-C: Informational Name Plates Providing and fixing of outdoor fixed stone bollard of size 300X1000m, finish: sanded with a polished effect inlcuding rate ofengraving and illustrations as per architect incharge Cost of Acrylic Sealer Extra cost of CNC charges for precise carving wherever required Cost of preperation of shop drawing and designnig FMM (Flexible Median Marker) AFP (Alluminium Backed Flexible Prismatic Sheet) Transportation charges Erection Charges(including charges of crane) Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size 6 sq mm x 2 core Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earth as per direction of engineer-incharge. for cable size 6 sq mm x2 core Supply and fixing of plain or pin type copper tin plated cable socket (lug) to cable leads for pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of engineer -incharge. for cable size 6 sq mm Supply & fixing of recess mounting round 15 to 18 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect. Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect. Supply and fixing of 3 watt to 6 watt LED (spot light) fitting Confirming to IP 65 and above protection Complete in all respect. CAT. - AAA (Use as a Decorative Mirror Light) Supply & fixing of 12 Watt LED Bulb - B22 / E27 (Colour Temp.- 6500K / Lumens - 900 lm) cool day light, Input Volts (AC 90V-260V), 3-Star rating suitable for Batten/Angle holder including making connection.Complete in all respect. Supply & fixing of 225/230mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect. POLE LIGHTS Supply ,Installation ,Testing And Commissining Of Twinkle Lites Make Hybrid Decorative Pole Dragon-H Pole iwth height of 7-9M With Casted Aluminium Base And Ripped Gi Pole Pipe With Decorative Post Top Lantern 'Concord' 1270Mm Long With Polycarbonate Diffuser In 60W Led Having Lumn Output Not Less Than 110Lmns/Watt With 10Kva Surge Prtector Designed As Per Architect In-Charge ( Make- Twinkle Lite- /-Havells/Neri/Juvaas/Orient/ Thor) Bollards Supply And Fixing Of Twinkle Lites Make 'Tigris' 800Mm Long Made Out Of Extruded Aluminium Profile With Cast Alumn Base With 18W Led. (Make- Twinkle Lite- Equvalent In :-Havells/Neri/Juvaas/Orient/ Thor) Supply and Fixing of Spike Light for trees 12 watt Warm White. (Including civil works) "Supply and Fixing of KL-4098 Inground Luminare of 8W LED Asymmetrical (DIA.116 X153)MM Supply of 3000K/4000K/5700K In-ground 8W asymmetrical luminaire made up of die-casting with Ø116 stainless steel 316 grade front ring with silicone black gasket and toughened clear glass diffuser. With Electronic Driver, The luminous flux of the luminaire is upto 550 lm for 3000K BA- 35°/45° (Asy). The ingress protection is IP67 and impact resistance of IK08. The luminaire is integrated with high power NICHIA LED with CRI≥80, SDCM≤3, L70/ B10 @ 60000 Hrs at L70B10. The integral constant current driver comes with the power factor greater than or equal to 0.9, total harmonic distortion less than 15% with operating efficiency greater than 80% and a surge protection of 3KV. The driver input voltage 240Vac at 50-60Hz, operating voltage of 100- 277Vac and operating temperature of -20˚ ~ +40˚C with CE confirmed BIS approved. There may be changes in fixture selection and quantity as per architect intent Make: K-Lite KL-4098, Unilamp/ Ligman" Supply and Fixing of KL-3594 Aster-6 of 20W LED (2010X13X5.4)MM Supply of 20W Monocolour encapsulated flexible LED Strip having Dimension 2010 x 13 x 5.4 with IP 67, 3000K/4000K/5700K, 24Vdc CRI >80 MacAdam step>3, Beam angle : 120°, Should be equipped with dot less homogenous lighting effect, Electronic driver ON/OFF (External driver), MATERIAL CHARACTERISTICS, High-Grade Horizontal bend Elasto Polymer & Endcaps, Silicone moulded diffuser, End Cap, This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire >60,000 hours at 40°C. Operating ambient temperature range is from -25°C to +55°C. Driver efficiency >85%, Surge protection 3KV. The OEM should have in house facility of encapsulation and in house testing laboratory. Certification: CE Certified, BIS Certification for Luminaires. Make as per Klite KL-3594/Unilamp/Ligman, supply and fixing following capacity of automatic street light cubicle control pannel with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 seeries with contactors, HRC fuse, isolating switch, metering instrument and instrument box with CTs etc.complete in all respect. 40 A SPN "L.T. Switch Panel Board : Supply& Erracetionof factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreise Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above insulated with heat shrink sleeving and mounted on non gyroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm.Cubicletype switchboard shall be of cat A & B Only. CAT. B Cubicle Type Lighting Panel : Incoming - 100 Amp MCCB - 1 No. Outgoing - 40 Amp DP MCCB - 4 No. (for d.b. ) 32 Amp 4P MCCB - 2 No. (for Spare) (Complete as per requirment directed by Project Manager.)" "Armoured Cables (Cable/Gland/Lug) : Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. size 10 sq mm x 4 core" Same as above but size 50 sq mm x 3-1/2core Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earth as per direction of engineer-incharge. for cable size 6 sq mm x 2 core Same as above but size 10 sq mm x 4 core Same as above but size 50 sq mm x 3-1/2core Supply and fixing of plain or pin type copper tin plated cable socket (lug) to cable leads for pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of engineer -incharge. for cable size 6 sq mm Same as above size 10 sq mm Same as above size 25 sq mm Same as above size 50 sq mm "Supply of exterior rated Architectural RGBW Linear LED Wall Washer luminaire; suitable for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness and die casted end caps, Total System wattage not exceeding 40W with system lumen output should be more than 1500 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 125.5 mm ± 5% including surface mount base width 64 mm ± 5% , length 1200 mm ± 5% with constant locking hinges for simple position control from various angles without special tools. DMX enabler circuit should be inside the Luminaire only. The rated voltage of the Luminaire should be 230Vac, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90-305VAC, PF > 0.90 and must have safety operation range form 90V - 176Vac. Life time of LED driver should be > 80,000 hours and MTBF of LED driver should be ≥ 2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Tc > 90°C. Fixture shall be suitable to operate at an ambient temperature range of -30°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required." Supply of exterior rated Architectural LED RGB flood lighting luminaire; suitable for facade lighting with Die-cast aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness, Total System wattage not exceeding 40W with system lumen output should be more than 2000 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 66 mm±1% including surface mount base , Length of 282 mm±1% and Width of 274mm±1% with constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only.. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage from 90-305 Vac, 50Hz with power factor > 0.9. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. Supply, installation, testing & commissioning of DMX Controller for the system including all other accessories required for the running of the system Controller should have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 with 4 universe, 2 universe should work in Stand Alone Mode and 2 universe should work in live mode with laptop/ tablet / computer. The universe should be expandable from 2 to 4 DMX512 universes. It should be compatible for Programmability with PC, Mac, Tablet, Smartphone by using USB & Ethernet .Dmx controller should have network controllability feature to control the scene remotely through LAN and triggered via UDP packets on port 2430. Its must have Connections Type C USB, XLR3, Ethernet, battery. There should be provision for Memory microSD card. Device should have Intuitive backlit keyboard with 10 presets and also have provision of kepad on device for changing scene manually from device. Device should be capable to work on Extended triggering possibilities (TCA) & also have Smart Upgrade Technology (SUT). It is an IP 20 unit and has an Operating Temperature of 0°C to 50°C. weight should not be more than 120g. OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 2048 DMX channels, clock/calendar, iPhone/iPad/Android remote control, Ethernet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 99 scenes across 5 areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions. Device should be equipped with meta; clamp to mount on wall. All Dynamic LED lighting fixtures & controllers shall be of same make to avoid integration, synchronization, and maintenance issues in future. To be provided with IP 66 enclosure if installed in external environment & shall be provided with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. Supply, installation, testing & commissioning of DMX Signal Amplifier to boost the Signal, IP 65 rated module to enahce the depleting DMX Signals, should have IP 66/67 rates inbuilt connectors compatible with Luminaires. It should be offered with inbuilt electronic ciruit for functioning. Supply of DMX address writer to write automatically address of DMX fixtures. Supply, installation, testing & commissioning of DMX Splitter with Input Voltage range : 190-240V AC, Power Consumption 5W max. Housing is made of CRCA with powder coated finish Mounting, 19 inch rack mountable, Operation Temperature -30°C to +55°C, 8 Output with 3pin XLR terminal sockets, Ingress Protection Rating IP20. This unit takes the DMX Signal from DMX Controller & split the signal into 8 separate output channels. The output terminals of Splitters are optically isolated from the input. Splitters should be capable to amplify the DMX signal & allowing the data link to be extended by max. 300 m (1044 ft.) using AWG 22 DMX cable or 150 m (500 ft.) using AWG 24 DMX cable or maximum 20-25 fixture per output channel. To be provided with IP enclosure if installed in external environment. Planning, Designing, Programming of all the light fixtures with integration into controller and making multiple programming in total of 5 different occasion. Synchronizing all fixtures into one. Supply installation commissioning of following sizes of power and data cable as mentioned: 3C x 4 sqmm Cu unarmored multistrand Data cable Cat 6 Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth. Supply, Installation, Testing and Commissioning of Feeder Panel - 5 KVA 3 Phase along with 01 No. UPS to provide safety / good quality power supply to DMX Controller. Supply and laying with 32MM GI pipe ISI DSR SI 2831 as per site requirement Providing and Fixing 2 No. hand rail size 600X100mm and grab bar 450mm long to mounted on the track (vertically and laterally) for handicaped toilet complete in all respects as directed by Architect-in-charge. Providing and Fixing Step Can Trash Bin as directed by Architect-in-charge. Providing and Fixing Baby Changing dispenser complete in all respects as directed by Architect-in-charge. Electric logging of bore hole Supply and Installation of 1.5 HP Submersible pump set complete "Drinking Water Fountain Supply, installation, and ground fixing of RADII™ Fountain FS2–F140R make Oasis or equivalnt as per the following specifications: The fountain shall feature a vandal-resistant button to activate the water flow, designed to eliminate splashing and standing water. It should include a flexible, vandal-resistant bubbler guard and operate between 20 and 120 PSI to cater to both physically challenged and able-bodied users. The unit must meet ADA frontal approach requirements and comply with ANSI A117.1–1992 standards. It should also adhere to U.S. and Canadian certifications, including ANSI/NSF 61, international plumbing codes, and the Safe Drinking Water Act. The fountain's key features include a light-press activation mechanism, a built-in 100-micron strainer to prevent debris from entering the waterways, lead-free waterways as per materials and construction standards, and a brushed stainless steel finish for durability and aesthetics. The unit shall have a net weight of approximately 23.6 kg (52.02 lbs) and include a limited 1-year warranty. All materials, tools, and labor required for the proper fixing of the fountain shall be provided by the contractor, ensuring adherence to the manufacturer’s guidelines for installation and best practices in construction."
|
