|
Tender For Provision Of Certain Minor And Revenue Work Under Ge Nams; 1 Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and hard soil complete, all as specified and directed. 2 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in loose/soft soil complete, all as specified and directed. 3 Removing excavatedmaterial soils, not exc 50m and depositing where directed at level not exc 1.5m above the starting point complete, all as specified and directed. 4 Labour onlyfor earth filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete, all as specified and directed. Note : Useable earth received from excavation to be used. 5 Material and labour for hard core of gauge not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. 6 Material and labour for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. 7 Material and labour for plain cement concrete (1:2:4) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. 8 Material and labour for cement concrete (1:2:4), type B-1, using 20mm graded stone aggregate in window cills, lintel band, bed block, copings and the like including weathering, slightly rounded or chamfered angles and throating, Including necessary form work complete all as specified and directed. 9 Material and labour for cement concrete (1:2:4), type B0, using 12.5 graded stone aggregate in roof kerbs or mudstop at junction of roof slab and parapet wall , vertical surfaces and like etc complete all as specified and directed, 10 Material and labour for Brick work with sub class "B" bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed. 11 Material and labour for Brick work with sub class "B" bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. 12 Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. 13 Supply and fixing for mild steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment conforming to Fe-290 (Gde E-165) complete all as specified and directed. complete all as specified and directed. 14 Supply and fixing for mild steel work in tubular trusses, posts, main and cross beams, hip and jack rafters, purlins, including special shaped washer etc. complete using ERW or induction butt welded tubes, conforming to IS 1161-1979, Gde St-240 complete all as specified and directed. 15 Supply and fixing for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 16 Material and labour for Painting on steel surface exceeding 10cm width or girth and two coat of synthtic enamel paint over one coat of primer complete all as specified and directed. 17 Supply and fixing for 32mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed. 18 Supply and fixing for swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed. 19 Supply and fixing for stop valves, concealed faancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions,for 15mm bore of pipe complete all as specified and directed.Make Jaquar /Cera 20 Supply and fixing for Grating, doom type , 100mm size of PTMT (minimum weight 25gms) complete all as specified and directed. 21 Supply and fixing for 110 mm bore PVC (SWR)pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors or trenches incl taking down old pipe complete all as specified and directed. 22 Supply and fixing for 75mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints, fixed to walls including stack clamp complete all as specified and directed. 23 Supply and fixing for 110mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints, fixed to walls including stack clamp complete all as specified and directed. 24 Supply and fixing for PVC (SWR) plain bend any radius for 75 mm bore complete all as specified and directed. 25 Supply and fixing for PVC (SWR) plain bend any radius for 110mm bore complete all as specified and directed. 26 Supply and fixing for Vent cowl 75mm bore PVC (SWR) complete all as specified and directed. 27 Supply and fixing for Vent cowl 110mm bore PVC (SWR) complete all as specified and directed. 28 Supply and fixing for 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed. 29 Supply and fixing for 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed. 30 Supply and fixing for cast iron floor trap, with chromium plated grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), dia of outlet 100mm complete all as specified and directed. 31 Material and labour for cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested for 150mm bore of pipe complete all as specified and directed. 32 Material and labour for salt glazed stoneware gully traps square or round mounthed, type "P" of size 125 x 100mm, setting and jointing with cement mortar (1:1) complete all as specified and directed. 33 Material and labour for 150mm bore, reinforced concrete pipes, class NP-2, laid and jointed complete with collars complete all as specified and directed 34 Supply and fixing for 1000mm x 1000mm plain edge mirror of selected quality glass not less than 5mm thick, mounted on wall fixed with stainless steel studany size complete all as specified and directed. Make jagaur/perry ware/hind ware 35 Supply and fixing for vitreous chinafloor mountedsingel peaceWC with PP soft close seat cover , hinges accessories setas persize 375x660x800mm with cistern fitting(including fixing boltsflush pipe) complete all as specified and directed. Make Jaquar/Perry ware/Hidware. 36 Supply and fixing for 4mmthick Nonasbestos fibre cement building boardsfixed or laid flatinserted to timber/GI/Aluminium framework with screws size 600 mm x 600mm gridincluding Anodised aluminium snap grid frame work for false ceiling Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longcomplete all as specified and directed 37 Supply and fixing for 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3complete all as specified and directed. 38 Supply and fixing for 20mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3complete all as specified and directed. 39 Supply and fixing for vitreous china wash down water closet pan (padestal pattern) white with flush pipe for low level flushing cistern including plastic water closet seat white withjet, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging devicecomplete all as specified and directed. 40 Material and labour for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note : Stainless steel butt hinges and necessary S.S screws shall be paid separately. 41 Material and labour for Factory made single extruded WPC (Wood Polymer Composite) solid door frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant including making good after complete all as speicifed and directed. Make : Rajshree or Ecocell equivalent 42 Supply and fixing for aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed 43 Supply and fixing for stainless steel , butt hingesof size 100 mm complete all as specified and directed. 44 Supply and fixing for extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. 45 Supply and fixing forDouble action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main bodywith stainless steel cover,governing pivot made of brass, other parts made of mild steelheavy duty and fixed complete, all as specified and directed. 46 Supply and fixing for 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed as percomplete all as specified and directed.Make Jaquarcat Part No ALD CHR 705L 130 or equivalent as approved by GE from the makes mentioned in Appx "B". 47 Supply and fixing for PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. 48 Supply and fixing forPVC waste pipe 32mm bore of size 750mm to 900mm long complete all as specified and directed. 49 Supply and fixing for8mm dia brass, chromium plated health faucet (Hand shower) with 01 meter long flexible tube and wall hook complete all as specified and directed Make : Jaquar Cat No - ALD-573 or equivalent as approved by GE from the makes mentioned in Appx "B". 50 Supply and fixing fortwo waybib cockfancy type, chromium plated withhigh pressure, of 15mmbore with flangefor WC pointcomplete all as specified and directed. Make Jaquar Cat part No OPP CHR 15041PM or equivalent as approved by GE from the makes mentioned in Appx "B". 51 Supply and fixing forchromium plated, Toilet paper holder complete all as specified and directed.Make : Jaquar Cat No ACN -1153N or equivalent as approved by GE from the makes mentioned in Appx "B". 52 Supply and fixing for Soap dispenser automatic capacity 0.8 ltr material AISI aluminium/ABS (Absolute Butadin sterenJ complete all as specified and directed Make :Jaquar Cat Part No HDR SAP M-99ACS CA 50 orequivalent Make as approved by GE from Appendix "B". 53 Supply and fixing fortumbler holder complete all as specified and directedMake:- JaquarCat No ACN -1141Norequivalent Make as approved by GE from Appendix "B". 54 Supply and fixing for Towel ring round with round flangeapproved by GEcomplete all as specified and directed 55 Supply and fixing for20 mm thick, PVC sheet one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent as in Kitchen cabinet, cub board (with shelves and partitions) including necessary fitting & fixture as per manuacturer"s instructions complete all as specified and directed. 56 Material and labour for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick verticale tiles with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc set &jointed in neat cementslurry and pointed inwhite or coloured cementto matchincl dismantling / demolitionand e colour oftiles, rendering10mm thick in cement mortar (1:4) , complete all as specified and directed. 57 Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 09 sqm but not exceeding 0.11 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match i and rubbish off the primises etc complete all as specified and directed. 58 Material and labour for vitrified tiles 8 to 10 mm thick, in (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to matchincl dismantling / demolition, coloured tiles laid over and including 15 mm thick screed bed or bedding layer in Cement motarcomplete all as specfied and directed. 59 Material and labour for Non skid ceramiccoloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick cement plaster 1:4 incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. 60 Material and labour for Granite 18-20 mm thick (table rubbed and polished)in steps, jambs, pillars, window cills, cooking platforms, wash basin platform, treads, risers and like laid in cement 15 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc.complete all as specified and directed. 61 Supply and fixing for aluminiumanodised powder coatingany colour minimum coating 50 microndoor/ windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frame offixiing with handles, tower bolts, rubber gasketand maruti lock ,complete all as specified and directed.Note :-Floor door spring, sheet glass, wire cloth,etc shall be measured and paid seperately. 62 Material and labour for anodised aluminium powder coated door shutters, aluminium section weighting 0.55kg/m ,incl necessary ,5 mm thick, black tinted glass panes with nano coating &glazing or PVC sheet joining with cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, handles, lock , 2 x aluminium handles 150mm, 3 x hinges , 2 x Aluminium tower bolts 150mm with each shutter of any type complete all as specified all as specified. 63 Supply and fixing for anodised aluminium powder coated window and ventilator shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary,5 mm thick, black tinted glass panes with nano coating& glazing, aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.), rollers etc complete all as specified all as specified 64 Material and labour for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protectionfinishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed 65 Material and labour for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete workand finishing the surface even and smooth (without using extra cement) includingWPC @3% weight of cementetc.complete all as specified and directed. Note-WPC will be measured and paid separately under appropriate item. 66 Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat ofalkali resistant primer complete all as specified and directed. 67 Supply and fixing for Angularstop valves,, fancy type, chromium plated with long shank and cup, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mmbore with flangefor geysercomplete all as specified and directed. Make Jaquar Cat part No OPP CHR 15053PM orequivalent Make as approved by GE from Appendix "B". 68 Material and labourfor Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed. 69 Supply and fixing for vitreous china urinals, fullstall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement incl flush pipe, grating, waste coupling and union for discharge pipe complete all as specified and directed 70 Supply and fixing for viterous china squating pan of (Orrissa Pattern) size 580 mm white with "P" or "S" trap front or back inlet and integral foot rest ,including joining, filling and provision of cement concrete bedding 1:5:10, type E2 (excluding flushing cisteern and flush pipe) fixed inclcement concrete bedding as required set complete all as specified and directed. 71 Supply and fixing for 10 ltrs capacity PVC valveless. Syphonic action type, flushing cistern, lowlevel, with inlet, ball valve, float, and handle and bracketsincluding 32mm dia flush pipe of polyethylene ofhigh density for low level cistern complete all as specified and directed. 72 Supply and fixing for vitreous china warecounter ovel wash hand basin, any colour, size 605x430x200mm sizefixing in slab including fixing waste pipe , CP waste coupling complete all as specified and directed.makeJaqaur CAT Part No CNS WHT 705 orequivalent Make as approved by GE from Appendix "B". 73 Supply and fixing for 32mm bore Brass chromium plates bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified as directed. 74 Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt PCC tiles or any type oftreatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m complete all as specified and directed 75 Material and labour for of 25mm plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in levelling course complete all as specified and directed 76 Material and labour for rendering 20 mm thick in cement mortar (1:4) on other thanfair brick work or concrete surfaces of walls/roof, finished even and smooth without using extra cementcomplete all as specified and directed 77 Supply only water proofing compound ISI marked complete all as specified and directed. 78 Material and labour for applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer In-Charge. 79 Disconnecting, setting aside (or lowering if required) andCleaning & removing all scale and dirt etc from HDPE water tanks of 500 litres capacity (Tanks placed on top of roof)and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed. 80 Supplying , fixing & Hoisting and fixingin position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixedcomplete all as specified and directed. 81 Material and labour forproviding and fixing fully glazed 12mm thick entracetoughened glass door comprising of one leaf glass shutter of any size gully glazed with neceesary handle , etching ,mpivot arrangement fixed to aluminium doors with aluminum beeding and gasket to aluminum frameworkin squareexc 0.50 sqm ineach pane complete all as specified and directed. (a) All the small works such as cuttings raking making holes pinning insertion etc making good to disturbed portion as per site requirements/ users / given by the Engineer-in-Chrage shall be included in unit quoted rates .(b) All itching work in glass as directed Engineer-in-Chrage shall be included in unit quoted rates.(c) All Glass door shall be water tight with megnets water seal/as directed Engineer-in-Chrage 82 Supply and fixing for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed. 83 Supply and fixing for PCGI Hinge (DL) door for civil opening1800x2100mm44 mm thick door leafwith 2mm lead sheet SS ball bearing hinges D handles , both side keyoperation deadlockflush bolt and1 door closer (without glass window )complete all as specified and directed. 84 Supply and fixing for Upper lead line panel upto wall cutout for sizes 1800x1000mmcomplete all as specified and directed. 85 Supply and fixing for PCGI hinges (SL)door for civil opening1000x2100mm 44 thick door leaf SS ballbearing hinges D handle bothside key operationdead lock with emergency releaseand one door closer (without window for changing room )complete all as specified and directed. 86 Supply and fixing for 10mm thick lead glass with lead frame for sizes 600x1200mmfor console room wall for operatorcomplete all as specified and directed. 87 Supply and fixing for in repair Aluminium body door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg. complete all as specified and directed by Engr-in-charge. 88 Supply and fixing for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 89 Material and labour for powder coated aluminium window sliding type (Bombay pattern) with frame of 1.5mm thick aluminium sections including 5.00mm thick tinted glass fixed with & including anodized aluminium snap beading, glazing clips, joining clips, screws, standard rubber gasket, handles/ Knobstwo nos. for each window , MS rollers two nos. for each window shutter and including stainless steel wiremeshfixing with shutter etc complete all as specified and directed with following specifications:-(a) Aluminium section for window frame =101.50x44.45x2mm(b) Aluminium section for styles and rails of shutter = 44.0 x18.0x2mm(c) Aluminium ventilator frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.(d) Aluminium window frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed. 90 Supply and fixing forbathroom cabinet set of material HDHMR size 24 Inch withfollowing arrangements complete all as specified and directed.(a) Wash basin 605x455mm (b)Mirror 500x700mm(c)Side cabinet 240x135x700 (d)Floor mounted 580x451x650(e) waste pipe with coubling with all complete arragnement as specified and directedSomanybathware signature collectionModel DALLANE 91 Material and labour for heavy duty Glazed Vitrified Tiles forstep and riser8 to 9mm thicksize300mmx1200mm, 200mmx1200mmandlandiingas in floor (in treads, landing etc ),set, jointed and pointed in neat cement slurrywith white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar(1:6) complete all as specified and directed. 92 Material and labour forheavy duty, exterior grade tiles of any size 12mm thick, as in floor (in trades, landing etc ),set, jointed and pointed in neat cement slurrywith white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar(1:6)complete all as specified and directed.(Durastone of Somany/Enduraof johnson or equivalent as approved by GE) 93 Supply and fixing for central hole basin mixer withextended spout 450mm long braided connection pipe (without popup) for iron pipe or for unions and fixed to 15mm bore pipe complete all as specified and directed. 94 Material and labour for VitriefiedFull Bodytiles 9 to 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqmas in vertical surfaces such as dados/skirting etc set and jointedin neat cement slury and in coloured cement to matchincl dismantling / demolition, Coloured on incl plaster (backing coat) 1:4 CM 10mm thick complete all as specified and directed 95 Supply and fixing forornamental stainless steeltubular pipes/sheets, pieces suchas pipe caps globe at top 18 guage and grade304 as in staircase railing including welding , moulding riveting nut and bolt with all necessary fittingPVCcomplete as shown directedby Engineer-in-Charge 96 Supply and fixing for in repair 450mm long PVC connections with PTMT nuts of suitable for 15mm bore dia pipe complete all as specified and directed. 97 Material and labour for point wiring for One light / fan / Exhaust fan point controlled by one 5 Amp switch one way.with PVC insulated, unsheathed, multistranded coppper conducter cable of size 1.5 Sqmm, FRLS through and including PVC conduit with fittings and PVC insulated, usheathed copper conductor cable continious earth wire of size 1.5sqmm, FRLS connected to common earth and 3mm thick plastic laminated sheet and CIMS box for mounting of accessories including making good to the disturbed surfaces complete for one light point/fan point/call point controlled by one way switch complete all as specified and directed. 98 All as per item No. 97 above but wiring with using cable 2.50 sqmm size copper wire (FR) and earth wire of PVC insulated (Green colour) 2.50 Sqmm sizecopperwire for one 6 pin socket outlet, 16 Amperes on independent board complete all as specified and directed. 99 Supply and fixing for switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed. 100 Supply and fixingof switch piano flush button single pole one-way 15 Ampere complete all as specified and directed. 101 Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed. 102 Supply and fixing for ceiling rose 65/50 mm two to three terminals complete all as specified and directed. 103 Material and labour of lamp holder insulated body with back plate batten /angle type for batten fittings with LED bulb 230 V AC 9/10 Watt cool day light 6500 k having maximum height 1020 mm heavy duty complete all as specified and directed. 104 Supply and fixing for MCB 32 Amps single pole with neutral, AC 230 Volts complete all As specified and directed. 105 Supply and fixing for MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of "B" series in distribution boards complete all as specifiedand directed. 106 Supply and fixing for Sheet metal enclosure for DB"s when MCB"s to be used doubledoor factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 8 ways complete all as specified and directed. 107 Supply and fixing for testingSingle phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 250 mmsweep, PVC body complete with louvrers and shutters complete all as specified and directed. 108 Supply and fixing for LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens complete all as specified and directed. 109 Supply and fixing forof security lightmounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos ofpole fitting clamps made out of MS flat of size 40 x 6 mm and nutsand boltsand painting with aluminium paint, complete all as specified and directed. by Engr in Charge 110 Supply and fixing for LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 ywisted copper cable from ceiling rode to light fitting complete all as specified and directed. 111 Supply and fixing for laid in trenches/ on wall and floor LT UG XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 2 core complete all as specified and directed. 112 Supply and fixing for double wall corrugated (DWC) pipes made of high density polyethylene (HDPE) with all accessories i.e. all type of joints,sockets,elbows,bends and end cap etc. of size 75 mm outer dia and 61 mm inner dia complete all as specified and directed. 113 Material and labour for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade ) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PART 1 , with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switche, DBs) completeall as specified &testing on completion. 114 Material and labour cuttingexisting steel tube any type size for alteration /addition of pipes complete all as specified and directed 115 Supply and fixing of steel water tubes 25 mm bore medium grade, galvanised, with all fittings laid in trenches complete all as specified and directed 116 Supply and fixing of 25 mm bore gun metal, globe or gate valves, iron wheel head, screwed both ends for iron pipescomplete all as specified and directed
|
