|
Conventional Lease Of Work, Using Template Of Pointed Boards Every 2.00M - 2 Uses. Af_10/2018, Demolition Of Masonry For Any Type Of Blocks, Mechanized, Without Reuse., Removal Of Doors, Manually, With Reuse 01 Units., Removal Of Windows, Manually Without Reuse 02 Units., Manual Excavation For Crowning Block Or Footing (Including Excavation For Placing Formwork), 01/24/2025, Ballast With Granular Material (Crushed Stone N.2), Applied To Floors Or Slabs On Soil, Thickness Of *10 Cm*., Concreting Of Footings, Fck 30 Mpa, Using Pumpbalancing, Densification And Finishing. , Framing Of Various Reinforced Concrete Structures Except Beams Pillars Slabs And Foundations Using Steel 0.50Mm Ca-60 - Assembly., Framing Of Various Reinforced Concrete Structures, Except Beams, Pillars, Slabs And Foundations, Using 8.0Mm Ca-50 Steel - Assembly. Af_06/2022, Using Steel Ca-50De 10, Assembly And Disassembly Of Beam Formwork, Shoring With Wooden Fork, Simple Right Foot, In Plasticized Wood Sheet, 18 Uses., Manual Backfilling With Percussion Soil Compactor, Manual Excavation For Baldrame Beam Or Running Footing Including Excavation For Placement Of Forms, Thickness *5 Cm*., Concreting Of Crown Blocks Or Baldrames Beams Fck 30 Mpa, Using A Pump Launching, Densifying And Finishing, Beam Waterproofing With Asphalt Emulsion, 2 Coats, Concreting Pillars Fck=25Mpa Using A Crane - Launching, Assembling And Dismantling Of Beam Form, Shoring With Wooden Fork Simple Right Foot In Plasticized Wood Sheet 18 Uses., Concreting Baldrame Beam, Fck 25 Mpa, Using 8 Ca-50 Steel, Using 5.0 Mm Ca-60 Steel - Assembly., Slab Pillars And Foundations, 0Mm - Assembly , Ceramic Block Fence Masonry Holed Horizontally 11, 5X19x19cm (Thickness 11.5M) Of Walls With A Net Area Greater Than Or Equal To 6M² If M Openings And Laying Mortar Prepared In A Concrete Mixer., Chapisco Applied To Masonry And Internal Concrete Structures, With A Trowel. Mortar Trace 1:3 Buy In Concrete Mixer 400L. Af_06/2014, Single Mass, For Receiving Painting, In 1:2:8 Mortar Mix, Mechanical Preparation With 400L Concrete Mixer, Manually Applied To Ceiling, 20Mm Thickness, Using Flights. Af_03/2015, Manual Application Of Acrylic Sealer Base On External Walls, Application And Sanding Of Latex Putty On Internal Walls, Two Coats, Acrylic Texture, Manual Application On External Walls, One Coat, Manual Application Of Acrylic Paint On Walls, Two Coats , Ribbed Welded Steel Mesh, Ca-60, Q-92, (1.48 Kg/M2), Wire Diameter = 4.2 Mm, Width = 2.45 , Including Expansion Joints And Mechanized Polishing, Execution Of Concrete Floors With Concrete Cast In Situ, Machined, Conventional Finish, Unreinforced, 06 Cm Thick, Subfloor With Self-Leveling Mortar, Applied To The Slab, Adhered, 2 Cm Thick. Af_07/2021, Ceramic Floor Coating With Enamelled Type Plates Of Dimensions 60 , At The Full Height Of The Walls, Ceramic Skirting Board 7 Cm High With Dimensions 60X60 C
|
