|
Supply Of Electric Material On Annual Rate For The Year Of 2024-25 At Electrical Department Of Dahod Nagarpalika, Dahod (Under Nagarpalika Self Fund Grant 2024-2025). Second Attempt=1 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 percentage , CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficiency> 85 lumens/watt . LED driver efficiency > 85 percentage . CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates) 20 W LED STREET LIGHT-CAT-II 1.1 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 percentage , CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficiency> 85 lumens/watt . LED driver efficiency > 85 percentage . CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates) 20 W LED STREET LIGHT-CAT-III 2 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 percentage , CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficiency> 85 lumens/watt . LED driver efficiency > 85 percentage . CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates) 35 W LED STREET LIGHT-CAT-II 2.1 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 percentage , CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficiency> 85 lumens/watt . LED driver efficiency > 85 percentage . CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates) 35 W LED STREET LIGHT-CAT-III 3 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 percentage , CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficiency> 85 lumens/watt . LED driver efficiency > 85 percentage . CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates) 70 W LED STREET LIGHT-CAT-II 3.1 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 percentage , CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficiency> 85 lumens/watt . LED driver efficiency > 85 percentage . CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates) 70 W LED STREET LIGHT-CAT-III 4 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 percentage , CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficiency> 85 lumens/watt . LED driver efficiency > 85 percentage . CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates) 120 W LED STREET LIGHT-CAT-II 4.1 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 percentage , CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficiency> 85 lumens/watt . LED driver efficiency > 85 percentage . CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates) 120 W LED STREET LIGHT-CAT-III 5 Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 KV.grade to be erected as directed of following size i.e. 2 core 6 Sq. mm service wire (Yellow Wire) 6 Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5percentage , 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comporised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transperent cover erected as required with necessary connection. 7 STREET LIGHT ON/OF 3 PHASE CONNECTOR 8 STREET LIGHT ON/OF TIMER.3 PHASE COIL CONNECTOR 9 SP MCB WITH METAL COVER 10 DP MCB WITH METAL COVER 11 FF MCB WITH METAL COVER 12 CLAMP FOR LED FITTING ON CEMENT POLL. 13 Supplying and erecting approved make Conical Pole (Medium Duty ) Made from HR sheet steel. The pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, with required base plate and integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable terminations as erected on suitable foundation (included) with necessary nut-bolts/J-Bolts. as per details given by manufacturer considering site requirement. For 7m high pole 14 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground. 15 Providing 1:2:4 cement concrete foundation & 70 percentage PCC from bottom including excavation for the pole of size 60 x 60 x 120 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for 7.5 & 8/8.5 mtr pole) 16 Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 KV.grade to be erected as directed of 4 core 10 Sq. mm. 17 Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable 50 MM DWC PIPE. 18 32 MM BEND PIPE FOR STREET LIGHT. 19 30 A CONNECTOR. 20 Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia). SINGLE ARM BRACKET. 21 Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia). DOUBLE ARM BRACKET. 22 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. 3 CORE X 2.5 SQ MM COPPER FLEXIBLE WIRE. 23 100 W LED FLUID LIGHT FIXTURE 24 150 W LED FLUID LIGHT FIXTURE 25 200 W LED FLUID LIGHT FIXTURE 26 STREET LIGHT JUNCTION BOX 27 PVC TAPE ROLL 28 40 A ON/OF MCB SWITCH. 29 OPEN MODULAR TYPE POINT WIRING 30 2.5 SQ MM MAINS WIRE. 31 4.00 SQ MM MAINS WIRE. 32 20 W LED STREET LIGHT FIXTURE REPAIRING 33 35 W LED STREET LIGHT FIXTURE REPAIRING 34 70 W LED STREET LIGHT FIXTURE REPAIRING 35 120 W LED STREET LIGHT FIXTURE REPAIRING 36 100 AMP MAIN SWITCH FOR PANEL 37 7 METER LED 200 W HIGHMAST TOWER 38 200 W LED 12 METER AUTOMATIC HYDRAULIC TOWER BAJAJ MAKE. 39 200 W LED 12 METER AUTOMATIC HYDRAULIC TOWER SURYA MAKE. 40 CEILING FAN Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing.[Make shall be approved by Engineer in charge] 41 WALL FAN Supplying and erecting approved make Bracket fan of 230 volt, A.C. 50 Cy/s., 400/450 mm sweep complete erected on wall or with lead Cores and connections complete. 42 EXHAUST FAN Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square frame. 43 20 W T.S LED TUBE 44 12 W LED POP LIGHT 45 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with necessary connections. (A) Suitable for 100 Amp. Capacity. 46 36 W LED POP LIGHT 47 THREE PHASE STREET LIGHT ON/OF TIMER PANEL 48 SINGLE PHASE STREET LIGHT ON/OF TIMER PANEL
|
