|
Tender For Disposal Of Unserviceable, Scrap Materials, Office And Hospital Non-Medical Equipments And Medical Equipments-01 Island Table Size: 16.10 L feet x 6 W feet with chemical Rack, electrical point, 02 Wall Side Table: Size: 4240mm L x 900mm W feet with electrical point, Wall Sade Table: Size: 4785 mm L x 900mm W feet with electrical point, Wall Side Table: Size: 6187 mm L x 900mm W feet with electrical point, Wall Side Table: Size: 4540 mm L x 900mm W feet with electrical point, Air conditioner Lab Stool IC Rack Celling Fan 3D PRINTER A Interior Works 1 FALSE CEILING 1.1 Supplyand installation of Grid false ceiling The scope of this section comprises supply, fabrication, installation and testing of Grid False ceiling of size 600 x 600 mm above the the Room 2 FLOOR TILES 2.1 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints Size of Tile 600x600 mm of Kajaria/somany/Orient 3 Window 3.1 Supply and installation of Window as per existing window size 4 LAB DOOR 4.1 Supply and Installation of Doors Size 1200MM X 2100MM Including all the hardware like, hinges, handle, accessories 5.0 ELECTRICALS WORKS Distribution Board 5.1 12 Way, TPN, Phase Segregated type, MCB DB, Similar to HAGER make: VYT08DH with provision for suitable incomer & with metal door or Equivalent as per approved makes. (For Ltg,RP DB) 6 Light Fixctures Supply and Installation, testing & commissioning of standard light fittings and lighting accessories. The scope shall include own lifting & unpacking assembly of luminaries, providing of all hardware such as SS chain or 16 SWG SS wire or Griplle lighting supports, nuts, anchor fasteners, bolts, screws, cleats, clamps, Junction box, PVC insulated wires / cables from Junction box to lighting fixtures,ceilling roses ball and socket arrangement with J.B., suspension conduit pipe 1.5 m long 19 mm SS conduit down rod / chain / gripples/ MS supports for including painting also for light fittings. The scope of work also includes any rewiring, modifications required to be carried out on the mounting bracket to suit mounting of light fixtures & any modification inside control gear box/fixture for proper commissioning of fixture. 6.1 Supply and installation of LED Light Fixctures 2ftX2ft 40W Recassed Mounted top opening Led Luminaire CRCA with powder coated housing. With SS case. 6.2 Supply and installation of Electrical Switches and Sockets 15A 7.0 L.T. CABLES & LT CABLE END TERMINATIONS Supply,laying,testing and commissioning of 1100V grade, XLPE insulated armoured / unarmoured Aluminium / Copper conductor cable as per technical specifications. The cable shall be laid in trenches / cable trays as required. The cable shall be clamped at regular intervals to the supports in trench or on cable trays or brick wall using MS clamps, cable ties and fasteners as per technical specifications. Upto 6sqmm, cables of round strips and 10sqmm and above cables of flat strips shall be considered. 7.1 4Core 1.5 Sqmm LT XLPE insulated Aluminium conductor FRLS outer sheathed Armoured cable 7.2 4Core 2.5 Sqmm LT XLPE insulated Aluminium conductor FRLS outer sheathed Armoured cable 7.3 1R 6sqmm Multistrand FRLS CU green color wire with copper lugs crimped on both the ends and bolts & nuts. Rate shall include necessary cable ties to tie it to the supports. (For all DBs incomer) 7.4 R Y B Wire for Furniture Raceway internal Looping Each 1 Coil 7.5 Providing and applying four coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers , including cost of all materials, cost of labour and scaffolding etc.,complete as per specifications. Area to be considered- (a) 100% for fresh surface at all levells 7.6 Providing and applying two coats with Plastic Emulsion Paint of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc., complete, with all leads and lifts and as directed by the Engineer-in-charge. etc
|
