80W Led Public Light, With Smd (Surface Mounted Diode) Led Technology; Minimum Luminous Flux 12,000 Lumens, Energy Efficiency 150 (Lm/W); Power Factor 0.92; Total Harmonic Distortion (Thd) 10%; Dps Surge Protector, Class Ii Or Higher, External To The Driver, 10Kv And 10Ka; Useful Life Equal Or Greater Than 90,000 (Ninety Thousand) Hours; Working Voltage 127V To 220V; Driver Internally Incorporated Into The Luminaire, Dimmable Using The Standard 0-10V Or Anywhere; Color Temperature 5,000K, With Acceptable Variation Between 4,710K And 5,260K; Color Rendering Index 70; Limited Or Totally Limited Distribution Control; Minimum Mechanical Protection Ik08 (Degree Of Protection Against Impact); Degree Of Protection At Minimum Ip-66 (Ingress Protection); Side Fitting For Ø48mm And Ø60.3Mm Arm; Fastening Screws In Stainless Steel Or Galvanized; Electrostatic Painting With Polyester Powder Paint In Gray, With Uv Protection; Have A Standard 3-Pin Or Higher Socket In Its Upper Part; Easy Assembly For Installation; 5 Year Warranty. To Prevent Theft And Property Control, It Must Be Laser Engraved On The Lamp, Janiopolis-Pr, 110W Led Public Lamp, With Smd (Surface Mounted Diode) Led Technology; Minimum Luminous Flux 16,500 Lumens, Electronic Photocontroller Relay, Type Ln (Night On) And Fd (Fail Off) Fail Off, In Accordance With Abnt 5123 Standard. Polycarbonate Casing With Uv Protection; Load Capacity Of 1000W Resistive, With Minimum 5Ka Surge Protection; Ip66 Protection Index; Operating Voltage From 127V To 220V Or Higher At 60Hz; Contact Durability Greater Than 30,000 Cycles, Minimum Warranty Of 5 Years., Double Curved Ornamental Arm, Must Be Manufactured In Carbon Steel, With Galvanization Treatment. Tube Gauge With External Diameter Of Ø 50, 80Mm With At Least 2Mm Of Wall To Fit The Luminaire. It Must Have A Fitting For The Post With An External Diameter Of Ø 88.90Mm With A Minimum Of 2.65Mm Of Wall, Have A Vertical Projection Of At Least 1000Mm And A Maximum Of 1200Mm And A Horizontal Projection Towards The Road Of 2000Mm. The Decoration Must Be Made Of Galvanized Steel Sheet With A Minimum Thickness Of 2.25Mm, As Per Sketch, Relay Base With Metal Support, 01/21/2025, Copper Cable Type Pp 3X1, 5Mm² 500V, Piercing Connector For Aluminum Cable 70Mm², Tapit Type Connector For Aluminum Cable Miscellaneous, Arm For Public Lighting Type Br02 3 Meters With Fixing Accessories
|