Installation Of Yard Lighting Arrangement , Electrical Wiring Of Chlorine Room With Lighting Luminaries Of T ... in India

Work Detail

Installation Of Yard Lighting Arrangement , Electrical Wiring Of Chlorine Room With Lighting Luminaries Of Tabadi O.H.R. Premises Under Improvement Of Rcfa Part-I W/S Scheme.- 1 70 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Make-Approved Make) 2 4 ft. long 22 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantlydesigned end caps.(Make-Approved Make) 3 4 Core X 16 Sqmm, 1.1 KV Grade XLPE insulatedAl.Ar Cable.( From LT MCC Panel feeder to DBs)(Make:-Approved Make) 4 9.0 Mtr. Long swaged and welded steel tubular pole as per IS-2713-1980 with CI Base Plate & CI Cap.(Make:-Approved Make)a) Single arm bracket made of 40mm Dia 1.5 Mtr. Long. 5 4 Core X 10 Sqmm, 1.1 KV Grade XLPE insulatedAl.Ar Cable.(From DB Box to Pole to Pole)(Make-Approved Make) 6 3 CoreX 2.5 Sqmm industrial flexible copper cable wire/dia-30/0.25 PVC insulated with PVC sheathed.(Make:Approved Make)(For 7 Nos Pole + One O.H.R.) 7 30 Watt LED Post-top IP65 elegently designeddie-cast aluminium housing and high grade aluminium heat sink for efficient thermal management for gate light.(Make-Approved make) 8 Supplying and fixing double door 6 Way Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(32 Amp FP/TPN MCB as a Incomer+6 Nos 10 Amp SP MCB as a Outgoing)(Make-Havells, DB"s Model No-DHDPTHODRW06) 9 Distributionwiring in 1.1 KVsingle core stranded "FR"PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit "FR" (Precision make) incl. necy. fittings as required. 10 2 X 22/0.3(1.5 Sqmm)+1 X 22/0.3(1.5 Sqmm)ECC. 11 2 X 56/0.3(4.0 Sqmm)+1 X 36/0.3(2.5 Sqmm)ECC.(For Industrial Plug Socket) 12 Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. makingearthing attachment, painting and mending good damages to building works.8 Module. 13 Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required. 14 Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 15 Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A,SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl.S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. 16 Fixing outdoor type LED Light fitting on column of O.H.R. including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting.(For O.H.R. Lighting) 17 Fitting & fixing of the outdoor lighting luminaries along with new accessories to the pole, Gate and O.H.R. Wall etc as per direction of EIC. 18 Fixing only single LED Tube light fitting complete with all accessories directly on wall/ceiling by screws etc. 19 Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling upthe excavated earth pit with shifted soil and ramming properly.Upto 9.0 mtr. Size 0.6x0.6x1.70 mts. 20 Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicatedelow,Comprising of one 250 V,15 A Kit-Kat fuse unit, one NL on,porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1)after dismantling the damaged looping cable box etc. where necy. incl. painting.(250 x 250 x 100mm.(For 9 Mtr. Pole-7 Nos+2 Nos for Gate light+1 No for O.H.R. Light) 21 Connecting the pole to earth busbar including S & F GI(Hot Dip) wire of size as below,spiral on pole body as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. 22 No. 12 SWG. 23 Laying of one No. 4 Core X 10 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection onthe top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. 24 Earthing with GI earth spike(1822mmX20 mm) and grouted the same under the ground level as per direction. 25 Laying of cable 3 Core X 1.5 Sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. 26 Add GST @ 18% 27 Add CESS @ 1%

Contact Information