|
Tender For Road safety work at 03 T-junctions falling on Hajiapur Jhaua Shikarpur Farrukhabad road (other district road) under the district Farrukhabad - Excavation for roadwork in soil with hydraulic excavator of 0.9cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections and transporting to the embankment location within a lifts up to 1.50m and lead upto 1000m. As per technical specification clause no. 302.3 (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 2 Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 3 Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification Clause 401 (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 4 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 5 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 6 Laying brick soling layer on prepared sub- grade with brick on and edging according to lines graded and cross section shown on the drawing filling joints with sand and earth spreading 25mm thick layer of earth over brick soling watering and rolling the same with three wheeled road roller 80-100 KN as per Technical specification clause 412 (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 7 Providing and applying primer coat with bitumen emulsion(SS-2 Bulk) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sq m using mechanical means. as per Technical Spec. No. 502 (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 8 Providing and applying tack coat with bitumen VG-10using pressure distributor at the rate of 0.30 kg per sq.m. on the prepared bituminous/granular surface treated with primer and cleaned with hydraulic broom as per Technical Specn. No. 503 (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 9 Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration or Emulsion grade bitumen to required line grade and level to serve as wearing coarse on a previously prepared base by manual means. including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades to be followed by seal quotas for T.S.C. 508 (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 10 Providing and layingseal coat by manual means with 80/100 grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per TSC 510 (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 11 TRAFFIC SIGNS-STOPProviding and fixing of retro-reflectorised Stop sign (900 mm high octagon) cautionary, mandatory and informative sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, friced cover aluminum sheeting type IV, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.Retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67-2012 & proof of the same in form of government report shall be uploaded while quoting tender.(Size 900 mm high octagon) (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 12 TRAFFIC SIGNS - CurveProviding and fixing of retro-reflectorised cautionary, mandatory and informative sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminum shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly designed foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (as per IRC:67-2012 clause 14.60) 90cm equilaperal tringle with definition plate size (20x60 cm) (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 13 Direction and place Identification signs up to 0.90 sqm size Board Providing and erecting direction and place identification retro-reflectorised sign as per IRC-67 made of high intensity grade sheeting The retro reflective sheeting type-IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. vide clause. 801.3 fixed over aluminum sheeting 2 mm thick with area exceeding 0.9 sq.m. Supported on a milled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm., below ground level as per approved drawing. complete (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 14 TRAFFIC SIGNS -Right / Left side road (T)Providing and fixing of retro-reflectorised cautionary, mandatory and informative sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminum shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsigned foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (as per IRC:67-2012 clause 14.60) 60x45cm rectangular with definition plate size (20x60 cm) (Rates are including all taxes, royalty, labor cess) etc but Exculding GST shall be paid as per applicable) 15 Providing and laying Road Markingas per IRC:35-1997 using Thermoplastic (Hot Application) color white/yellow by indigenous manually propelled road marking machine with single coat of 2.5mm thick as directed by Engineer-In-Charge including cost of conveyance all in gradients such as Binders, Glass beads, Titanium-di-oxides, Calcium - carbonate pigments as per MORT&H specification of clause-803.4.1.2 for the preparation of Thermoplastic requirement for Glass beads shall be table No.803.4.1.3 of MORT&H specification including cost of all materials, labour, T&P and hire charges etc.required for proper completion of work at site. (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 16 Providing and laying of hot applied thermoplastic compound 5.00 mm thick including reflectrising glass beads @ 500 gms per sq.m. area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable) 17 Supply and fixing of reflective raised pavement marks(Cat Eye) with its body surface made of tough polyerbonate and its reflective lens made of polycaronate micro prismatic lens (capable of providing total internal reflection) RPM(without shank) as per ASTM as per SOR LKO (Rates are including all taxes, royalty, labor cess etc but Exculding GST shall be paid as per applicable)
|
