|
Extra-Tall Wardrobe With 02 Doors - Dimensions: 800 Top Top Made From Mdp 25 Mm Thick, Coated On Both Sides With Thermo-Pressed Melamine Film 0.2 Mm Thick, Textured, Semi-Matte And Anti-Reflective. The Edge That Follows The Entire Contour Of The Top Is Topped With Polystyrene Tape With A Minimum Thickness Of 2.5 Mm, Glued With Hot Melt Adhesive, With Rounded Edges And An Ergonomic Radius Of 2.5 Mm In Accordance With Abnt Standards. The Fixing Of The Top/Body Must Be Done Using Internal Accessories, Such As Pins And Hidden Minifix Screws, Making It Possible To Assemble And Disassemble The Furniture Without Damaging It. Doors Made Of 18 Mm Thick Mdp, Semi-Matte And Anti-Reflective. The Edge That Follows The Entire Contour Of The Door Is Covered With Polystyrene Tape With A Minimum Thickness Of 2.0 Mm, 0 Mm In Accordance With Ergonomic Standards Nr-17. The Pair Of Doors Are Supported On Hinges (Four Per Door), Preventing Accidents By Not Having Sharp Corners, And Also Allowing For Various Adjustments With Openings Of Up To 105° Degrees. Each Hinge Is Fixed By 5 Screws Fixed At Pre-Marked Points For Perfect Alignment Of The Pair Of Doors In The Set. The Right Door Has A Cylindrical Lock With Side Latch Locking With 2 Keys (Main And Spare) With Retractable (Foldable) Bodies, Zinc-Plated Finish And Plastic Cover. The Left Door Is Automatically Locked On The Right, Using 2 Metal Plates 80 X 50 X 1, Thus Allowing The Pair Of Doors To Be Closed With Just One Operation. Both Doors Are Equipped With Bar-Type Aluminum Profile Handles, With M4 Internal Thread. Fixing Must Be Done With Two Screws, At A Rate Of 32 Mm. Body (02 Sides, 01 Bottom, 4 Movable Shelf And 1 Fixed, Low Cabinet With 02 Doors - Dimensions: 800 Thick, With Rounded Edges And Ergonomic Radius Of 2, 0 Mm In Accordance With Ergonomic Standards Nr-17. The Pair Of Doors Is Supported On Four Hinges (Two Per Door), 01 Bottom And 01 Mobile Shelf) On The Side, Straight Work Table - Dimensions: 1200 X 600 X 740 Mm - Maximum Variation Of 5% In Measurements For More Or Less. Top In Mdp, 25 Mm Thick, Coated On Both Sides With Thermo-Pressed Melamine Film With A Thickness Of 0, Semi-Matte And Anti-Reflective. The Edge That Follows The Entire Contour Of The Top Is Covered With 2.5 Mm Polystyrene Tape. Fixing The Top/Structure Must Be Done Using Hidden Minifix Type Screws, Fixed To Metal Bushings Made Of Zamak, And Driven Into The Top. Front Panel In Mdp, 15 Mm Thick, Semi-Matte And Anti-Reflective. The Edge That Follows The Entire Contour Of The Panel Is Covered In Polystyrene Tape With A Minimum Thickness Of 0.45 Mm, Glued With Hot Melt Adhesive. Panel/Structure Fastening Must Be Done Using Minifix Type Concealed Screws. Cradle Rail Made With 0.9 Mm Metal Sheets, Folded Into “J” Shape, With Horizontal Internal Division That Allows The Passing Of Individual Wiring (Electrical And Telephone), With Holes For Installing 2 Conventional Power Sockets (Round) And 2 For Rj-45 Type Plugs. Side Structures Made With Tubes And Metal Sheets, Upper Base For Attachment To The Top In Steel Tube 30 X 20 X 1
|
