|
Tender For E-Tender Repair And Maintenance Of Work In Various Department At Mds University Ajmer- Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: Of area 3 square meter and below. Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: For thickness of tiles 10mm to 25mm. Dismantling Gl pipes (external work) including excavation and refilling trenches after taking out the pipes and including stacking of pipes within 50 meter lead: Above 40mm nominal bore. Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. Dismantling Cl pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into block, including stacking of pipes lead at site within 50 meter, of dia: Up to 150mm dia. Dismantling of flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable material within 50 meter lead. Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A': 30 mm thick. Commercial Veneer both side Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. Extra for providing other type of fittings as mention in annexure A (as approved by El): Stainless steel fittings Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 10.8mm thick mica Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish: 25 mm thic 6 mm thick cement plaster to ceiling of mix 1:3 (1cement: 3-fine sand) Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1) cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying al priming coat of approved steel primer. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Providing and fixing Square bars or other flat welded to window, ventilatiors etc. Renewing glass panes and refixing existing wooden fillets: 4mm thick plain glass panes. Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS: 13753 & IS 15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS: 13755 and IS: 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement: 3 coarse sand) jointing with white cement mortar 1:2 (1white cement 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Good quality South Black Above 3601 Cm2 Slabs Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc.. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work Full Edge moulding Providing and fixing aluminum work for doors windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS:733 and IS1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gap. at junctions, at top bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth rust free, straight, mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc., all complete as per architectural drawings and the directions of Engineer- in charge (Glazing and paneling to be paid for separately). For fixed portion Polyester Powder coating aluminum (minimum thickness of powder coating 50 micron) For shutters builtup standard tubular sections of openable doors windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Polyester Powder coating aluminum (minimum thickness of powder coating 50 micron) Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium section (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Polyester Powder coating aluminum (minimum thickness of powder coating 50 micron) Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size) Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Extra if square, rectangular hollow tubelar sections are used or grill made by flats only S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. summ thick таctory made solid both side pre laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15x15mm top & bottom rails. M.S frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC 'C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture's specification & drawing. (For W.C.and bathroom door shutter) Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision New Work Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20mm nominal size 25 mm nominal size P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm².) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5 110mm dia P & F Indian type white glazed vitreous china 15 quality W.C. orissa pan (IS 2556 Mark) with 100 mm vitreous china Por S trap including cutting and making good the wall and floor: Size 580x440mm. P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor P & F Low level Flushing Cistern of 10 litres capacity (IS: 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall: WVC with C.P. brass bend. P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall: Size 550 mm x 400 mm dia for counter top P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. Other sizes P & F Towel Rail or Ring of approved quality/make: C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). P & F Grating of approved quality/make: Synthetic Material (PTMT) of approved quality/make Square 150 x 150 x 8mm. (Anti Cockroach) Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings Por S trap. P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS: 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. P & F Looking Mirrors with P.V.C. frame of approved make as per direction of Engineer-in-charge Size 500x400mm P & F Extension Pipe for bib cocks of approved quality/make. C.P. brass of Heavy & Superior quality 150 X 15mm. Providing & fixing C.P.flange for 15mm dia taps. P & F Premiumquality water closet Seat Covers with brass hinges complete Solid PVC (ISI marked) grade-l White for EWC. P & F 15 mm. Dia Connection Pipe of approved quality/make: CP Brass Pipe with CP Brass nuts upto length 600 mm. P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make: Gun-metal 15mm nominal bore. Gun-metal 25mm nominal bore. Gun-metal 32mm nominal bore. P & F PVC Storage Tank ISI Marked (IS: 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity. Hoisting Charges for each floor: Making connection of G.I. distribution branch with G.I. main including all fitting. Upto 25mm dia Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size: 15mm dia nominal bore 25mm dia nominal bore 32mm dia nominal bore Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in- charge Swan neck pillar cock 15 mm nominal size 190 mm rain shower Shower arm Hand shower with 8 mm dia 1 mt long PVC tube & wall hook complete Bib Cock with long thread 15 mm nominal size Long body Bib Cock 15 mm nominal size Angular stop cock with long thread 15 mm nominal size Concealed stop cock 15 mm nominal size Sink cock with swinging casted spout (table mounted )15 mm nominal size 600 mm long towel rail Soap dish Double coat hook Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.5 M Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m, 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. Inside size 450 x 450mm depth upto 0.5 M Cement cover with frame P&F Square-mouth gully trap 'A' grade (IS 651-1992 marked) of approved make complete with C.l. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm. Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592: 1992 Marked) of approved quality/make 75 mm dia 110 mm dia Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 1992 Marked) of approved quality /make Coupler 110mm dia Bend 87.5 Dg. 110mm dia Door Bend 87.5 Dg. 110mm dia Pipe Clip 110mm dia W.C. Connector 110mm dia Single Tee 110mm dia Single Tee with Door 110mm dia Nahni Trap without Jali 4" 110mm dia Vent Cowel 110mm dia Construction of septic Tank in all types of soil with 40 Cm.thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr Size 400 x140x150 cm. (for 50 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm @15 cm c/c bothways including shuttering complete in all respect Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1: 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring, earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: Size 240 Cm. dia outside & 240 Cm. depth. Emptying of Septic tank, Soakage well etc. by disposing or sludge upto 5 Km. lead & taking out sewage including cleaning of site. Making of hole in R.C.C. slablwall/beams and masonary wall (width up to 450 mm) by core cutting machine complete as per direction of El From diameter 100mm to 150mm Repair to stone masonary in cement sand mortar 1:6 with old and new stone.
|
