|
Tender For E-Tender For Admin Block Renovation Work At Jaipur Dairy - 1 H-Schdule 2 Mineral Fibre Ceiling Tiles with Silhouette Grid - 3 Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System with (Bevelled Tegular) Edge Tiles With 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.9, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7), suitable for Green Building application, with Recycled content of 63%. The tile shall be laid on Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm and a load carrying capacity of minimum 11.25 Kgs/M2 & pull out strength of 100Kgs.Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension. The Tile & Grid system used together should carry a 30 year warranty. INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using suspension system (specifications below) at 1200mm maximum centre.The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module.Cut cross tees longer than 600mm require independent support.600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. 4 P/F Flush Door Single Leaf shutters,(32 mm thick) core of Block Boardwith 1mm thick laminateas per design & detail, approved colour and make on both faces of the shutter. Cost to include necessary screws and hardware , lock system and all edgings in approved wood and Complete as per specification and direction of Engineer-Incharge. 5 Providing & fixing panelling on walls of 19mm plyboard with 1mm thick laminateas per design & drawing with sub-frame of size 40 x 25 mm hard wood & 450 mm center to center treated with anti - termite & fire retardant paint. The frame to be fixed on walls with screws and wooden gutties. Rate to include necessary notches in frame on carrying electrical conduit & switch boxes and Complete as per specification and direction of Engineer-Incharge. 6 TV-UNIT-AS PER DWG 7 Supply and fixing ofholllow box made out of 19 mm thk commercial plyboard duely laminated with 1 mm thk. Laminate of height of 10"-0".Intermediate support to be given by 19 mm thk commercial ply at every 6" space inside hollow potion to make the box more stiffer and Complete as per specification and direction of Engineer-Incharge. 8 Providing and fixing Working counter upto 2"0" wide comprising of following complete in all respects. officer / staff working counter top 2"0" deep with 1 mm laminate made with 19 mm thick blockboard finshed with 6mm white CORIAN including officer / staff working top at 2"6" ht. provided with telescopic CPU stand, and key board. Tray shall be provided made out of 19 mm board.laminate & ball bearing slides. All remaining exposed surfaces will be finished with laminated finishcomplete. Footrest made with T.W mamber of size 4" x 1 1/2", complete. Boxing made with 19 mm thick blockboard, finished with laminate, shall be provided below the tabe top for electrical conduit and at the bottom for the LAN cabling / Telephonic wire conduit. The item to include all necssary hardware & fittings in stainless steel finish to all edges & making provision onlyfor electrical fitting. and Complete as per specification and direction of Engineer-Incharge. 9 MISCELLANEOUS WORK 10 Providing & fixing in position "3M" make frosted glass film in stardust range fixed to glass as per pattern. Area of application to be measured as maximum length x maximum height of application on that particular piece of glass and Complete as per specification and direction of Engineer-Incharge. 11 Providing and fixing pelmet made in 19 mm plywood to enable fixing of blinds along the window and other area with necessary 50 x 50mm salwood /19mm thick plywood supports system at regular intervals as directed by the Architects. The plywood edges shall havepvc beadingas per the detail drawings. The exposed teakwood surfaces shall be stained to shade as directed by Architects and polished melamine 250 x 600mm high in Laminate finish 12 Providing and placing in position Meeting Room TableMade from 25 mm BWR PLY top, finished with 1 mm laminate in two or more colors. The base and modesty shall be made from 25 mm BWR board, finished with laminate as per drawing/details.The top is supported on a teak wood frame with 75 x 50 mm teak wood members placed as per detailed drawings. The table top shall have 65 x 50 mm teak wood moulding on the edges. The table moulding shall be polished with PU Matte finish after preparing the base as per the manufacturer"s specifications.The table shall have all RGB and AV connectivity with a pneumatic pop-up plate (Legrand, Crabtree, or equivalent), complete to the satisfaction of the Engineer/Architect. (Only the table top is considered for area calculations.)8 mm colored lacquered glass is inserted in the top ply as per the design. Complete to the satisfaction of the Architect/Bank"s Engineer. 13 Providing & Fixing frameless fully glazed 12 mm. clear Toughened Glass Door (in one / two shutter) with floor mounted pivotted door spring hinges to shutters fitted with patch fittings & floors with plate & screws including cutting holes & mending good with cement mortar. Edge of glass to be polished as 14 Providing and fixing in position a full-height, fixed glass partition utilizing 12 toughened glass panels, secured with approved aluminum/metal framing system including necessary patch fittings, silicone sealant at joints, and all required hardware, complete as per design drawings and specifications 15 Providing and fixingStorage CabinetsSize: 2"-6" (High) x 1"-6" (Deep), along the walls/partitions, as per interior drawings. The cabinets shall be constructed using 19 mm Commercial Ply (Makes - Century/Green Ply/Archid) for shutters, vertical and horizontal partitions, and 6 mm Commercial Ply for the backside.Finishing shall include 3.5 mm thick Veneer (Makes - Green/Century/Kit Ply/Archid) of approved shade on the top, vertical, and horizontal visible surfaces, and 0.8 mm thick laminate on the inside.The shutters shall be overlapping on the carcass and provided with suitable hinges with auto-close and soft-close mechanisms. The width of the shutters shall be between 12" to 15" as per site conditions.All the internal surfaces shall be finished with 0.8 mm thick mica (Make - Sunmica/Greenlam/Century/Merino) of desired shade, design, and gloss. All exposed wooden surfaces shall be melamine polished in the desired shade as per specifications given in item 2.1(c).The cabinet shall be complete with 4" handles, knobs, locks, hinges, and magnet catchers (Makes - Godrej/Dorset/Dorma), etc., to the satisfaction of the Architect/Engineer Low Height 16 Full Height 17 Providing and fixing a complete door frame constructed with 19 mm thick BWP grade plywood, including all necessary framing members (jambs, head, and threshold) as per approved design and dimensions, finished with [specified finish - e.g., primer and paint], complete with necessary hardware for door fixin
|
