|
Tender For Welcome Maintenance Repair To Vacant Qtrs And Repair Replacement Of Plumbing Works Plastering Tiling Works And Sanitary Fittings At Arc Charbatia; 1 M&L for Preparation of old decoratedplastered or unplastered surface of ceiling and applying one coat of white wash complete all as specified and directed. 2 M&L for preparation of old decorated plastered or unplaster surface of walls and applying two coat of oil bound distemper any tint complete all as specified and directed. 3 M&L for preparationof old decorated plastered surface by complete removal of existing treatment from surface of walls and applying two coat of oil bond distemper any tint for ceiling surfaces complete all as specified and directed. 4 Material and labour for prepration and removing of nails, making good holes, cracks etc of old plastered or unplastered internal surfaces of wall and applying one coat ofoil bound distemper complete all as specified and directed. 5 M&L for preparation of old decorated surface of walls and applying one coat of plastic emulsion paint (internal) any tint complete all as specified and directed. 6 M&L for preparation of old Wooden painted surfaces andapplying two coat of synthetic enamel paintof any description not other wise described over 10 cm width or grith etc complete all as specified and directed. 7 M&L for preparation of old Steel painted surfaces andapplyingone coat of synthetic enamel paint of any description not other wise described over 10 cm width or grith etc complete all as specified and directed. 8 Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. 9 M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. 10 M & L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified and directed. 11 Taking down cement plaster on brick or stone or concrete surface etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. 12 M & L for rendering5mm thick in CM 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and directed. 13 M & L for rendering10mm thick in CM 1:6 on fair faces brick or concrete surfaces of wall including finished even and smooth without using extra cement complete all as specified and directed. 14 Material and labour for rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick or concrete surfaces {5mm thick CM (1:4) mix with WPC @2% by weight of cement or as per manufacturers instruction} as setting coat and 10mm thick CM 1:4 backing coat), finished even & smooth without using extra cement complete all as specified and directed. Note :- WPC will be measured and paid separetely as supply only. 15 Supply only integral water proofing compound complete all as specified and directed. 16 M&L preparation of new plastered or unplasteredsurfaces of wall and applying two coats of cement based paint complete all as specified and directed. 17 M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. 18 Material and labour for preparation of new plastered surfaces of wall and applying 2 mm thick wall care putty over plaster surface to prepare the surface even and smooth and applying two coats of oil bound distemper over and including a coat of primer on walls complete all as specified and directed. 19 Demolition of Cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 20 M&L for RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in Slabs supported on walls, balconies, canopies, deck slabs and in shelves/Chajjaand the like complete all as specified and directed. 21 M&L for mild steel TMT bar 10 mm dia and above cut to length bent to shape incl binding canking, bending, hooking ends and binding with MS (annealed) wire not less than 0. 9 mm dia complete all as specified and directed. 22 M&L, mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends, stirrups spacersand binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed. 23 M & L for Plain cement concrete , type B-1,1:2:4 (using 20 mm graded crushed stone aggregates) as in coping, cills, steps, in lintels upto 1.5m clear span and similar other works like bands, plinth courses, lacing courses, bed plates, water troughs and the like incl weathring, slightly rounded or chamfered angles and throating, incl necessary form work, complete all as specified and directed. (Note - Reinforcement if provided, shall be measured and paid separately under relevent items). 24 Use and waste of Formwork to sides and soffits cantilevers, shelves/chajja including sup- ports, overhangs, etc. also splays between floors and beams, etc on flat surfacesand fair finished complete all as specified and directed. 25 Hackingout old broken glass (any thickness site quality or description)from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with putty or fixed with beads complete all as specified and directed. 26 S&F sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed. 27 S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 28 Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbishto the out side of MD land complete all as specified and directed. 29 M&L for Non skid coloured ceramic tiles7to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm in floor including15mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 30 M&L for coloured glazed ceramic tiles 450x350xx7 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:4 complete all as specified and directed. 31 M & L Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors including20 mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 32 All as per item No-31 here in before but in skirting / dado including 10 mm thick rendering in CM 1:3 33 Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specified and directed. 34 M&L 18 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite complete all as specified and directed. 35 M&L Machine cut cudappah stone slab flooring 20mm thick including 15mm thickcement screed base CM1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. 36 Rounding to edges of stone slab one edge, such as in steps, cooking platform, and other similar situation complete all as specified and directed. 37 Taking up or down 15mm diaGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 38 Taking up or down 20mm diaGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 39 Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing and making good of groves for concealed GI tube, cutting not exc 10cm girth complete all as specified and directed. 40 Refixingold steel tubing and connections 15mm bore in newor old position (wall, ceiling , floors) etc complete all as specified and as directed. 41 Refixingold steel tubing and connections 20mm bore in newor old position (wall, ceiling , floors) etc complete all as specified and directed. 42 S&F 16mm dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. 43 S&F 20mm dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. 44 S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size(flat back or angle back type) including cutting for and pinning ends of brackets or errecting stand includingpedestal complete all as specified and directed. 45 S&Fin repairs Vitreous China Wash down water closetpan (Pedestal pattern), white incl P or S trap and plastic seat cover etc (excluding flushing cistern and flush pipe) complete all as specified and directed. 46 S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and directed. 47 S & Fin repair plastic water closet white seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hingingdevice for pedestal pan complete all as specified and directed. 48 S&F in repairsPVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr capacitywhite with flush pipe & all fittingcomplete all as specified and directed. 49 S&F in repairs 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed. 50 S&F in repairs kitchen sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, couplingincluding bedding in cement mortar on to dwarf wall or including fixing cantilever brackets andconnecting union to pipe, overall size 610mm X 460 bowl size 560mmX 406mm X 203mm etc complete all as specified and directed. 51 S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, couplingincluding bedding in cement mortar on to dwarf wall or including fixing cantilever brackets andconnecting union to pipe, overall size 915mmx460mm, bowl size 410 mmx330mmx 160mm etc complete all as specified and directed. 52 S&Fin repair brass chromiuim platedSwivel shower roses with shower arm, 125 mm size including fxing to steel pipe or union etc complete all as specified and directed. 53 S&Fin repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges ofbrass chromium plated including brackets complete all as specified and directed. 54 S&F in repair Sink coupling of PTMT complete all as specified and directed. 55 S&F in repair PVC ball valve 20mm dia high pressure of PTMT with aluminium rod &high density plastic ball screwed for iron pipe complete all as specified and directed. 56 S&F in repair PVC ball valve 25mm dia high pressure of PTMT with aluminium rod &high density plastic ball screwed for iron pipe complete all as specified and directed. 57 S & F in repair PVC water tank lid (Dhakkan) tied with wire for 500and1000 Ltrcapacitywater storage tank complete all as specified and directed. 58 M&L for Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 250 liters and not exc 500 liters and writing date of cleaning with white paint on each tanks complete all as specified and directed. 59 M&L for Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 500 liter and not exc 1000 liters and writing date of cleaning with white paint on each tanks complete all as specified and directed. 60 S&Fin repair gratingdoom 100mm dia with waste hole of PTMT minimum weight 40 Gms complete all as specified and directed. 61 Resecuring or easing & adjusting without taking down shutter of any description of wooden joinery of following size complete all as specified and directed. 62 Not exceeding 1 Sqm each 63 Exceeding 1 Sqm butn.exc 2 Sqm each 64 Exceeding 2 Sqm each 65 Taking down and refixing of shutter of any description in same opening of following size complete all as specified and directed. Note : Refixing incl taking down easing and adjusting and also refxing builders hardware as reqd incl removal of unserviceable screws etc are including in quoted rate. 66 Not exceeding 1 Sqm each 67 Exceeding 1 Sqm but n.exc 2 Sqm each 68 Exceeding 2 Sqm each 69 S&F 150 mm long Aluminium anozied barrel tower bolt of extruded section complete all as specified and directed. 70 S&F 250mm longAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. 71 S&F 100mm long Butt hinges, mediumweight, cold rolled mild steel fixed with screw complete all as specified and directed. 72 S&F 100mm long Butt hinges, mediumweight, cold rolled mild steel fixed with welding complete all as specified and directed. 73 S&F 75mm long Butt hinges, mediumweight, cold rolled mild steel.complete all as specified and directed. 74 S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised Type C-21 complete all as specified and directed. 75 S&F 40mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. 76 S&F 150mm long aluminium handles, cast type, anodised complete all as specified and directed. 77 S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 78 S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.in cluding taking complete all as specified and directed. 79 S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.in cluding taking down complete all as specified and directed. 80 S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed in wallsincluding taking complete all as specified and directed. 81 S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring jointsfixed in wallsincluding taking down complete all as specified and directed. 82 S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. 83 S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. 84 S & F 75 mm bore PVC (SWR) branch piece single (Single `Y/T) equal or unequal without access door complete all as specified and directed. 85 S & F 75 mm bore PVC (SWR) branch piece single (Single `Y) equal or unequal with access door complete all as specified and directed. 86 S & F 110 mm bore PVC (SWR) branch piece single (Single `Y/T) equal or unequal without access door complete all as specified and directed. 87 S & F 110 mm bore PVC (SWR) branch piece single (Single `Y) equal or unequal with access door complete all as specified and directed. 88 S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified and directed. 89 S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed. 90 S&F in repair door closer aluminium extruded section hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. 91 S&Fin repair C.P bib taps cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule complete fixed in repair complete all as specified and directed. 92 S&F in repair brass chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete all as specified and directed. 93 S&F in repair following items in PVC cistern to make serviceable :- 94 PVC Washer for cistern 95 PVC handle for cistern 96 PVC float for cistern 97 PVC syphon for cistern 98 S&F in repair15mm dia stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedfor iron pipe fixed in repair complete all as specified and directed. Make Prayag or Equivalent 99 S & F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks tripel layer, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified anddirected 100 S & F in repairs 2000 litres capacity rotational moulded polyethylene water storage tanks tripel layer, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified anddirected 101 S&F in repairPillar taps, fancy type 15mm borecast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixe complete all as specified and directed. 102 S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. 103 S&F in repair brass CP mixer cock for mixing hot &cold water screwed down for iron pipe and fixed complete all as specified and directed. 104 S&F in repairstoilet paper holderwith flat recessed type stainless steel complete all as specified and directed. 105 S&F in repair stainless steel soap dish, any type fixed to plugs chromium plated brass screws complete all as specified and directed. 106 S&F in repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm dia complete all as specified and directed. 107 S&F inrepiars gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm dia complete all as specified and directed. 108 S&F in repairs fancy type stainless steel 20mm dia curtain rod with stainless steel fancy brackets & knob etc complete all as specified and directed. 109 S&F in repair stainless steel kitchen plate rack made of 1.00 mm thick sheet of size 750x600x250mm incl shelves, rod to put plates etcand fixed to wall complete all as specified and directed. 110 S&F in repairs for Stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type)fancy type screwed down, high pressure, with crown head, screwed both ends for 15 mm bore iron pipe or for unions, in repairs complete all as specified and directed.Make : Prayag or Equivalent 111 S&F in repairs for Stops valves, cast copper alloy, chromium plated fancy type with capstan head screwed down, high pressure, screwed both ends (angular type) for 15 mm bore iron pipe or for unions in repairs complete all as specified and directed. 112 S&F vitereous china wash down water closet pansize 680x370xx740 mm (singe pice suite),white (including fixing bolts,flushing cistern and flush pipe connection to drain(or outing going pipe) and to flushing pipe anti syphonage pipe etc. including taking out of existing one and making good disturbed surfaces as per existing specification complete all as specified and directed. 113 S & F in repairPVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. 114 S&F in repair PVC waste pipe 32mm dia 900 mm long complete all as specified and directed. 115 S&F in repairs brass CP two way bib cock 15with singleknow and wall flangecomplete all as specified and directed. 116 S&F in repair cabinet with mirror of size 622mm x 422mm made withPVC sheet, coloured and fixed to wall complete all as specified and directed. 117 S & Fin repair 600mmx450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC board or plywood and fixed to plugs with chromium brass screws and cup washers complete all as specified and directed. 118 M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved Bonding Agent / Epoxy Treatment in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturers instructions and providing pressure Guniting averaging 30mm thick at a pressure of not less than 6 KG / Sq.cm in Cement Mortar 1:3 duly modifying the mortar with and including suitable bonding agent of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 5% of weight of cement for sides and soffits of Slabs, Beams, Columns, Fins, Parapets Facias & Chajjas etc., finishing the top surface even and smooth without using extra cement conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material out of MD land complete all as specified and directed. 119 M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved Bonding Agent / Epoxy Treatment in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturers instructions and providing pressure Guniting averaging 20mm thick at a pressure of not less than 6 KG / Sq.cm in Cement Mortar 1:3 duly modifying the mortar with and including suitable bonding agent of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 5% of weight of cement for sides and soffits of Slabs, Beams, Columns, Fins, Parapets Facias & Chajjas etc., finishing the top surface even and smooth without using extra cement conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material out of MD land complete all as specified and directed. 120 M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and providing Non-Shrink, Cementitious Micro Concrete using Rendroc RG manufactured by M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. modified with 12mm graded, clean, saturated surface dry crushed stone aggregate in the ratio as per manufacturers instructions, as in columns, beams and similar structural members including use and waste of water tight formwork to facilitate pouring of micro concrete complete all as per manufacturers instructions and finally rendering 15 mm thick in Cement Mortar 1:3 and finishing the top surface even and smooth without using extra cement conforming to proper geometrics including providing double scaffolding and safety measures as required and complete all as specified and directed. [Note: Measurement shall be considered for circumference at centerline of core thickness] 121 M & L for preparing surfaces and applying a coat of Zinc Rich Epoxy Primer [Nito Zinc Primer of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturers instructions] to all steel surfaces as antirust agent including providing double scaffolding and safety measures as required and removal of the same on completion complete all as specified and directed. 122 M & L for preparation of surface for free from dust, dirt, loose potions, oil, grease, efflorescence, old coatings etc and cleaning the surface thoroughly.Application of Epoxy Bonding agent HS EpiBond on prepared surface and reinforcement.Repair mortar can be prepared using polymer modified mortar admixed with Advanced Latex Plus (Cement, Sand and aggregates with 5% to 10% Advaced Latex Plus). Before placing the repair mortar in the affected portion, a bond coat shall be given with Epoxy Bonding Agent Berger EPIBOND,complete all as specified and directed and as per manufacturers instruction.NOTE- Rates including scaffolding for execution of work. 123 M & L for Welding in repairs exceeding 2.5cm but not exceeding 5cm in length and thickness of metal welded exceeding 6mm and not exceeding 9mm complete all as specified and directed. 124 M & L for Welding in repairs exceeding 2.5cm but not exceeding 5cm in length and thickness of metal welded exceeding 9mm and not exceeding 20mm complete all as specified and directed. 125 S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and directed. 126 S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and directed. 127 S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated complete all as specified and directed.
|
