|
tender for As & As Door And Frames At Certain Officers Married Accommodation At E Sector, Dolphin Hill And Installation Of Acs In Lan Rack Room And Officers Cabin In Building No P-20 At Smhq Visakhapatnam As As Door And Frames At Certain Officers Married Accommodation At E Sector, Dolphin Hill And Installation Of Acs In Lan Rack Room And Officers Cabin In Building No P-20 At Smhq Visakhapatnam - AS & AS DOOR AND FRAMES AT CERTAIN OFFICERS MARRIED ACCOMMODATION AT E SECTOR, DOLPHIN HILL AND INSTALLATION OF ACS IN LAN RACK ROOM AND OFFICERS CABIN IN BUILDING NO P-20 AT SMHQ VISAKHAPATNAM Sl. No. Item Description 1 Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. 2 Refixing shutters of any description exc 1 Sqm but n. exc 2 Sqm eachin same opening complete all as specified and directed. Note : Serviceable shutter obtain from item no 1 shall be refixed 3 S & F 35 mm thick, factory made, glazed/skeleton window shutters with second class hard wood, open rebated and prepared to receive glass, gauze, etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numberedges of framing plain, chamfered or rounded etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, clause 8.24 (b) complete all as specified and directed 4 S & F 35 mm thick, factory made Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. 5 S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window Frames/ Chowkhats of size 65 mm x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as spefied and as directed. 6 S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window Frames/ Chowkhats of size 65 mm x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as spefied and as directed. 7 M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etcincluding necessary form work complete all as specified and directed. 8 M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. 9 M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. 10 S & F 100 mm long, stainless steel butt hinges fixed with stainless steel hinge pin etc complete all as specified and directed. 11 S & F in repair100 mm long, stainless steel butt hinges fixed with stainless steel hinge pin etc complete all as specified and directed. 12 S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. 13 S & F in repair 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. 14 S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. 15 S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 16 S & Fin repair150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. 17 S & F in repair aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. 18 S & F 375 mm long,mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 19 Making good under cills or over arches, lintels and bressummers.including all pinning when necessary in cement morter 1:6 complete all as specified and directed. 20 Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed. 21 M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed. 22 M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 as in half brick thick using old size brick complete all as specified and directed. 23 Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed 24 M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4,mixed with integral water proofing compoundwith weight of cement in top layer as per manufacturers instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). 25 Supply only integral water proofing compound (ISI marked) complete all as specified and directed. 26 M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. 27 M&L for preparation of new platered surface of wall and applying two coats of oil bound distemperover a coat ofprimer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfacescomplete all as specified and as directed.Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS 28 M&L for preparation of new platered surface of wall and applying two coats of weather proof exterior acrylic emulsion paint havingdart pick up resistant,silicon enhanced,UV resistant and PU enhanced propertyover a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfacesincluding all necessary scaffolding,complete all as specified and directed.Note :-Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS 29 S & FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed. 30 S & FFloor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floorcomplete all as specified and directed. 31 S & F inrepairFloor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floorcomplete all as specified and directed. 32 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal ofdebris and rubbish to outside MD land complete all as specified and directed. 33 Demolition of Cement concrete (unreinforcement) of any description and in any position not otherwise specifically provided for complete all as directed by the Engr-in-Charge. . 34 M & L for 25 mm thick, plain cement concrete 1:2:4,type B-0 (using 12.5 mm graded stone aggregate)as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed. 35 M & L for Vitrified, designed, light shade coloured (light shade), tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. 36 M & L for Vitrified, designed, light shade coloured, tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm as in vertical surfaces such as skirting,dado, etc including 10 mm thick bedding in cement mortar 1:4 and necessary cutting of tiles complete all as specified and directed. 37 M & L for Glazed, ceramic, colouredtiles of size 300mm x 200mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. 38 M & L for post construction Antitermite treatment by treating At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. 39 M & L for Granite floor stripscoloured of 18 to 25mm thick , width not exceeding 10cmfor the door cills fixed with approved quality adhesive complete all as specified and as directed. 40 Supply, installation and testing inverter split AC units indoor /outdoor complete with cordless remote control with inbuilt air ioniser and plasma filter for better indoor air quality, minimum 5 starrating,copper condenser,copper cooling coil and EER 3.2 of capacity 1.5 TR including making holes of required diaonwalls and necessary masonry work for making gooddistrubuted surface and match with the existing colour,PVC drain pipe of required length complete all as specified. Note :- Copper pipe , insulation and connecting cable, angle iron bracket will be neasured and paid separately under respective itemMake: Bluestar,Carrier,Voltas,LG, Daikin ,Hitachi ,O-General 41 S & F voltage stabilizer of capacity 4 KVA, single phase, input working voltage 170-270 Volts, metal body with time delay system, wall mountable, built in thermal overload protection, low & high voltage cut-off protection, micro controller based design complete all as specified and directed.Make: V-Gaurd model no VG-400 or equivalent model of make mentioned in PS 42 S&F Socket Residual Current Device (SRCD) With Steel Enclosure two pin and earth plug including 20 Amps MCB SP complete all as specified and as directed(Make : Havells Cat Part No. DHDDCDP025202003 or equivelant model of make mention in PS) 43 Supply and fixing copper pipe line heavy duty 1/2 diawith flair nuts and insulation as sunction pipe of split AC complete all as specified and directed. 44 Supply and fixing copper pipe line heavy duty 1/4 diawith flair nuts and insulation as discharge pipe of split AC complete all as specified and directed. 45 S & F Three core, PVC insulated, unsheathed, multistranded copper flexible conductor cable, 1100 vols grade ISI marked of size 2.5 sqmm complete all as specified and as directed. 46 S & F MS stand for mounting outdoor unit of Acscomplete all as specified and as directed.
|
