|
Crane And Dumper Trucks – Trucks For Glass Collection. Awg Waste Management District Calw Gmbh Needs A Truck With A Body For Emptying The Waste Glass Collection Containers As Well As Loading And Transporting Various Waste And Recyclable Material Fractions. The Truck Chassis Must, Among Other Things, Meet The Following Properties And Parameters: - 3-Axle Chassis With Steered And Liftable Trailing Axle Permissible Total Mass According To Section F 2 Registration Certificate? 26,000 Kg - Axle Load On The Front Axle For A Weight Variant Of 26.0 To? 10,000 Kg - Diesel Engine, Euro 6 Emissions Standard, Rated Engine Power? 350 Kw - Fully Automatic Transmission With Adjustable Retarder Brake - Steering Wheel Adjustable In Height And Inclination - Electronic Braking System (Ebs) - Reversing Camera System With 7 Inch Monitor, Rear And Side Camera - Led Lighting - Air Conditioning - Trailer Coupling D40 Ring Spring The Roll-Off Tipper Must, Among Other Things, Have The Following Properties And Meet Parameters: - Roll-Off Tipper Suitable For Holding Containers According To Din 30722 Parts 1 And 2 Of 5,000 Mm - 7,000 Mm In Constant Pump Operation - Lifting And Tilting Force Of The Hookloader? 22,000 Kg - Pneumatic Hook Safety Device - Electric Proactivedrive Cabin Control - Radio Remote Control - Rapid Traverse - Automatic Sequence Control - Wiring Harness For Pk/Cws Combination Or Comparable Type/Version For The Following Connection Options: O Crane Power O Headlights On The Crane O Engine Start-Stop O Working Speed Control O Height Warning Device O Transport Position Monitoring Of The Outriggers O Charger O Extension Cable Set - Hydraulic Rear Underrun Protection - Multi-X Coupling For 4 Hydraulic Connections At The Rear Of The Vehicle And A Multi-X Connector For 4 Hydraulic Connections Loose The Loading Crane With Hay And Forestry Grab At The Front On A Roll-Off Container Must, Among Other Things, Meet The Following Properties And Parameters: - Roll-Off Container For Glass Collection With Crane Preparation Between The Hook Holder And The Front Wall With A Usable Container Volume Greater Than 23 M³, Dimensions: Approx. 6,500 (5,150) X 2,300 X 2,000Mm, Crane Clearance Approx. 1,350 Mm, Hook Holder 1,570 Mm And Bracket Diameter 50Mm, Container Consisting Of An Outer Angle Frame Profile Longitudinal Beam Made Of Unp 220, Inside The Crane Plate Area Reinforcements With Burnished Parts At The Transition Between The End And Longitudinal Beams, Crane Plate As Burnished Part 25 Mm St. 52-3 With Oval Neckline, Front Wall Approx. 2,000 Mm High Made Of 3 Mm Sheet Steel With Cutout For Loading Crane, Sideboard Walls Approx. 2,000 Mm High Made Of 3 Mm Sheet Steel, Rear Portal Approx. 2,000 Mm High With French Universal Doors (Combination Of Swinging Rear Side Wall With Wing Doors), With Centrally Installed Swing Flap (Locking Can Be Operated From The Outside) , Rear Central Locking To Be Operated From The Outside, Body Floor Made Of 5 Mm Sheet Steel, Size 37, Container Inside And Primed On The Outside, Exterior Paint Ral 6032 - Hay And Forestry Grab With Hpx Drive: O Interlocking Tines, Constant And Synchronized Closing Force, Shell Changing System O Nominal Content: 0.40 Cm O Overall Width: 940 Mm O Opening Width 1,720 Mm - Pa
|
