|
Tender For Construction Of Microbiological Laboratory Over Existing Quality Control Laboratory Building At Coimbatore Dcmpu Limited ; 1 Dismantling of Reinforced cement concrete carefully and keeping the debris away from the site of work etc., complete 2 Dismantling of Plain cement concrete carefully and keeping the debris away from the site of work etc., complete 3 Dismantling of M.S Door carefully and keeping the same where the place shown by the departmental officers etc., complete 4 Dismantling of brick work carefully in cement mortar and keeping the debris away from the site of work etc., complete b)Above 3m height 5 Supply,erecting and centring for all type of RCCworks. 6 a) 0 to 3.30m - plain surfaces 7 b) 3.30m to 4.30m - plain surfaces 8 c) 3.30m to 4.30m - column surfaces 9 d) 4.30m to 5.30m - column surfaces 10 e) 5.30m to 6.30m - column surfaces 11 f) 5.30m to 6.30m - plain surfaces 12 g) 6.30m to 7.30m - column surfaces 13 h) 6.30m to 7.30m - plain surfaces 14 i) 7.30m to 8.30m - column surfaces 15 Reinforced Cement Concrete 1:2:4 (One Cement, Two M-sand and Four hard broken stone jelly) using 20 mm gaugemachine crushed hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. complete complying with standard specification and as directed by the departmental officers 16 a) above basement & 4.50m ht 17 b) up to 4.50m to 9.00m ht (in first floor) 18 Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors.. 19 Brick work in Cement Mortar 1:5 (one part cement and five parts M-sand) using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-1/2" x 3"to line, level and to plumb on one face including necessary scaffolding, racking out joints, curing etc., complete as directed by the departmental officer and as per standard specification. 20 a)above basement and upto 4.50m ht 21 b)upto 4.50m to 9.00m ht (in first floor) 22 Plastering with Cement Mortar 1:3, 12 mm thick in all floors complying with standard spcification 23 Plastering with Cement Mortar 1:5, 12 mm thick in all floors complying with standard spcification 24 Providing Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers. 25 Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete as directed by the departmental officers 26 Paving the floor with best quality of Double Charged Vitrified Tiles 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 10mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. 27 Paving the floor with pre-polished anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. 28 Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. 29 Supplying and fixing of Mild steel grills for windows, corridor etc., including priming coat and labour charges etc., complete as directed by the departmental officers. 30 Supplying, fabricating and fixing of Aluminium White coloured Powder Coated Glazed window/ ventilators of standard section and specification etc., including 5mm thick pinned glass fix in position with all the accessories, locking arrangements etc complete as directed by the federation officers and as per standard specification 31 Fabricating, Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 9mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m, Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips:17.15x17.27x1.50mm @ 0.176 kg/m,Alu.Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 1 No., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No., lock-1No., Door stopper with rubber bush including cost of materials labour charges etc., complete as directed by the departmental officers and as per standard specification 32 ABS DOOR / EQUIVALENT Specification:Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwichedon both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work 33 Supply & fixing of Aluminium partition with powder coated excluding single /double leaf doors, all aluminium sections at 2½"x1½" and bottom sections at 4"x1½" Jindal Aluminium clip 5mm thick glass Saint-Gobain glass/ Equal quality 8mm laminated Novapan particle board. All door materials should be branded 1st quality. The partititon height at required height with bottom 0.90m height with Novapan particle board, 1.20m height with 5mm thick glass, remaining height will be closed with Novapan particle board etc including door accessories like floor spring,door closer, handle wherever neccessary complete as directed by the departmental officers and as per standard specification 34 Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (interior) of first class quality and of approved colour including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. 35 Supplying and painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (exterior) of first class quality and of approved color over one coat of priming coat including priming coat and also make good of the surface with sand paper, putty, scaffolding etc., complete as directed by the departmental officers. 36 White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers 37 Supplying and fixing of false ceiling of Gyp board of approved quality including hanging support, corner beeding etc., complete. 38 Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete as directed by the departmental officials. 39 Fabricating, supplying and fixing in position of modular wall table with GI powder coated cupboards of approved quality and colour at required shape & size of 0.75m height and cupboard width of 0.90m from the wall with finely polished 20mm thick granite on the top of the cupboard with rounded edges. Also providing electrical arrangements of 6 module plate with 5A/15A - 2 sockets & switches and fixing of PP sink with 3 way water tap, Rate including loading, unloading, transporting etc., complete as directed by the departmental officers and as per standard specifications. Media Preparation Room - L shaped wall table of size (3000mm+4120mm) x 900mm width x 900mm height 40 Media Preparation Room - L shaped wall table of size (3000mm+4120mm) x 900mm width x 900mm height 41 Sterilisation Room - wall table of size 3000mm length x 900mm width x 900mm height 42 Innoculation Room - wall table of size 3260mm length x 900mm width x 900mm height 43 Enumeration Room - wall table of size 2400mm length x 900mm width x 900mm height 44 Decontamination Room - L-shaped wall table of size (2400mm + 3260mm) length x 900mm width x 900mm height 45 Fabricating, Supplying and fixing of GI Powder Coated Storage Cupboard of length (6"+10"+6") x 1.5" width x 6" height with doors locking arrangements. Rate including loading, unloading, transporting etc., complete as directed by the departmental officers and as per standard specifications 46 Fabricating, Supplying and fixing of GI Powder Coated Storage Shoe Rack of length 6" x 1.2" width x 2.4" height with doors locking arrangements. Rate including loading, unloading, transporting etc., complete as directed by the departmental officers and as per standard specifications 47 Supplying and fixing in position of 110mm dia PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the center of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. 48 Supplying and fixing in position "PVC pipe of 110mm dia of 6kg / cm2 of the following best approved quality and make conforming to ISS of the following diameter and providing leak proof joints with cement, spun yarn etc., including fixing the wall with necessary teak wood plugs, brass screws, mild steel clamps etc., and giving connections to all sanitary fittings including dismantling brick masonry, RCC floor or roof slab etc., wherever necessary and redoing the disturbed porition to the original condition including painting the cast iron pipes and fitting with two coats of anti-corrossive paint etc., complete complying with standard specifications- Below Ground Level 49 Supplying, laying and jointing UPVC (Un-Plasticized Polyvinyl Chloride) Pipe and Specials Higher water presser of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing. and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. 50 25mm dia UPVC pipe 51 20mm dia UPVC Pipe 52 32mm dia UPVC Pipe 53 25mm dia UPVC Elbow 54 20mm dia UPVC Elbow 55 25mmx20mm dia reducer Elbow 56 32mmx25mm dia reducer Elbow 57 25mmx20mm dia reducer Tee 58 32mmx25mm dia reducer Tee 59 25mm dia UPVC Coupling 60 20mm dia UPVC Coupling 61 25mm dia Brass Ball valve 62 20mm dia Brass Ball valve 63 Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Ground Moulded Chamber Burnt Bricks of size 9" x 4½" x 3"with Plastering with Cement Mortar 1:3 [One Cement and Three Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. CLEAR SIZE 0.60 X 0.60 64 Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications 65 Supplying, fixing in position of 1000 lts PVC water Tank over the roof top of the proposed building, Rate including all labour and lead etc. complete as directed by the departmental officers as per standard specification. 66 Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 3 nos. 32A 3P MCB, 18 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End 67 Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with MS switch box in flush with wall with 5AFT switch with 3mm thick hylem sheet cover MS switch box with continuous earth wire connection of 1.5sq.mm copper wire and making good of the concealed portion for concealed light point/fan point (for electronic regulator) 68 Supply and fixing of 3Nos. 5A (3pin and 2pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) 69 Supply and fixing of 20A Flush type Wall Socket 32ADP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) 70 Supply & run of 2 of 2.5 sq mm (36 / 0.3) PVC insulated SC unsheathed cu. conductor of 1100 V grade in suitable PVC rigid pipe on conceled & ceiling with continuous earth wire connection of 1.5sqmm (22/0.3) PVC insulated SC unsheathed cu. conductor of 1100 V grade and making good 71 Supply and run of 2 of 4 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection 2.5sqmm (22/0.3) PVC insulated SC unsheathed cu. conductor of 1100V gradeand making good of the concealed portion with suitable colour 72 supply and fixing of 18W LED square type Recessed fitting with LED (Lower end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. 73 Supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete (Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc complete 74 Supplying and fixing of Inverter Split AC (Daikin/Equivalent) 1.50 Tonnage Capacity 5 Star including cost and conveyance of all materials to site and labour charges for fixing in position etc complete as directed by the Departmental Officers. 75 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class "B" GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry 76 Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 77 GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.)
|
