|
Tender For Provision Of Filtration Plant At Af Stn Deesa; 1 Supply and fix Multi grade sand filter - FRP DIA : 30 INCH, HOS : 72 INCH, Service Flow Rate Max : 10 M3/ Hr ,Max. Working pressure : 3.5Kg/cm2 , Min. Working pressure : 2.0 kg/cm21, Source of raw water : Raw water (suspended solids < 30ppm),Type of flow : Down flow , Internal Arrangement : Mixture of Multi Grade Sand and Support media , Media Qty : 700 KG,including including sand media, pressure gauge, Bypass valve, inlet/ outlet valve and bas foundation complete all as directed Make : Ion Exchange (India) Ltd/ Thermax 2 Supply and fix ACTIVATED CARBON FILTER - FRP, DIA : 30 INCH , HOS : 72 INCH, Service Flow Rate Max : 10 M3/ Hr, Max. Working pressure : 3.5Kg/cm2 , Min. Working pressure : 2.0 kg/cm21, Source of raw water : Raw water (suspended solids < 30ppm), Type of flow : Down flow, Media Qty : 220 KGIncluding including pressure gauge, Activated carbon Bypass valve, inlet/ outlet valveBase foundation complete all as directed Make : Ion Exchange (India) Ltd/Thermax 3 Supply and fix SOFTNER - FRP, DIA : 30 INCH, HOS : 72 INCH, Service Flow Rate : 10 M3/ Hr , Max. Working pressure : 3.5Kg/cm2 , Min. Working pressure : 2.0 kg/cm2, Source of raw water : Raw water (suspended solids < 30ppm), Type of flow : Down flow , Resin Quantity : 600 Ltr, including Regeneration Tank : 1000 Ltr, including connected pipe, Bypass valve, inlet/ outlet valve and base foundation complete all as directed Make : Ion Exchange (India) Ltd/ Thermax 4 Supply and fixing GI pipes Heavy duty size 65mm dia 5 Supply and fixing GI pipes Heavy duty size 50 mm dia 6 Supply and fixing GI pipes Heavy duty size 100 mm dia 7 Supply and fixing of Butterfly Valve 50 mm 8 Supply and fixing of Non return Butterfly Valve 50 mm 9 Supply install testing and commisiioning of filter feed Pumping sets 5 HP415 V 3 phase , Discharge capacity 15 CuM per hrs and 35 Mtr head, 65 x 50 mm monoblockCentrifugal pump CI impeller, electric driven motor 415 V 3 Phase with PCC foundation complete 10 M&L concealed point wiring complete for independent socket 5Amp on independent board with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipes with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed inside thewall/ceiling by means of PVC conduit pipes and suitable accessories including suitable size of PVC boards/existing sunken box with Hylem board and cutting on stone masonry wall of any bldg at Kesarbagh new and old campus without damaging heritage and making good finish to the cut wall with 1:3 cement mortar, distembering/oil paint/emulsion as per ground with existing wall colour after applying putty finish etc after point wiring as per existing for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete all as specified and directed by Engineer-in-Charge. 11 S&F switch piano flush button single pole one way 6 Amps 230 volt grade Make : AnchorPenta or equivalent in Legrand 12 S&F socket outlet 2 in 1, 3 pin, 5 Amp flush type multi purpose, complete all as per specified and directed. 13 M&L for making ferrule on 100mm GI pipe for tapping water to the PVC storage tank and fixing saddle piece and welding nipple of 20mm on ferrule or fixing it by using MS clamp with suitable packing without leakage all as specified and as directed by Engineer-in-Charge 14 M&L 3 layered PVC water tank of capacity 15,000 Ltr with float valve of 50mm dia all as specified and as directed by Engineer-in-Charge 15 M & L forsub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including PVC Casing Caping/PVC Conduit or in existing concealed conduit(as required & directed by Engr-in-Charge)accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed all as directed. 16 S/F in DB"sSheet metal enclosure for SPN DBDB double door 6 waytype and 200 Amp ratings 240 volt omplete all as directed. Make : Siemens/Havells/L&T/C&S/Legrant 17 S&F MCB/MCCB in the DBs given below :- Make : Siemens/Havells/L&T/C&S/Legrant 18 (a). MCB SP0-32 Amp, 240 volts 10KA 19 (b). MCB TPN 63 Amp, 240 volts, 10 KA 20 Excavation in trenches for not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in soft/loose soil including taking out faulty cable/cable, cable covers and GI pipe complete all as specified and directed. 21 Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed. 22 Supply and lay sand cushioning to under ground LT cable complete all as specified in SSR Part-I and as directed by Engineer-in-charge. 23 M&L well burnt bricks sub class "B" as in protection of cable laid dry, flat abutting each other width wise complete all as specified and directed. 24 Supply and laying & testingsqmm 25 SQMM 4 core XLPE cable PVC insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable , (heavy duty), 1100 volts grade with stranded aluminium conductor complete all as specified and directed 25 Supply, install, testing & commissioningof on-line chloronation system cosisting of (a) FRP Solution preparation cum setting tank of capacity 100 ltrs tank with lid, port hole, inlet/ out let/ drain connection, level guage etc and fitted with speed reducing motor and SS-316 agitator.with MS stand -1 Set(b)SINGLE HEAD HIGH PRESSURE ADJUSTABLE GEAR MOTOR DOSING PUMP-2 Nos (1 Running + 1 standby) tank mounted high pressure single head gear motored adjustablewith FRP solution tank 100 Ltr accessories including lead tubing , connecting nuts injection check valve, clay weight and ferrules comlete all as directed-1Set Make REMCO 26 Supply, install testing and commissioningin repair weather and vermin proof LTdistribution box (Panel board) factory fabricated (CPRI approved) Indoor type totally enclosed made out of 2 mm thick sheet metal enclosure of suitable size, with Bus bar of 400 Amp 4 Nos, angle iron frame of MS angle 60 cm X 50 cm X 60 cm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate(a) Incoming: MCCB 125 Amp 4 pole 25 KA fixed type - 1Nos(b) Out going: MCCB 63 Amp 3 pole with neutral link -3 Nos(c) Outgoing: MCBSPN 63 Amp10 KA -3 Nos (d) RYB indicating lamp (e) Multi function meter to measure current voltage power, pf frequency etc 27 Supply and fixing of DOL starter suitable for 5 HP 415 Volt having Power contactor thermal realy complete 28 Supply and fixing of DOL starter suitable for 1 HP 250 Volt having Power contactor thermal realy complete 29 Supply and fxing of 6 sqmm x 3 core PVC insulated & PVC sheathed copper conductor 1100V withPVC pipe not less 25mm dia complete as directed 30 Earthing complete as per electrical plate NO.3 of MES SSR Part I with galvanised steel plate earth electrode 600 mm x 600mm x 6 mm burried directly in ground in a pit of depth not less than 2.25 metre below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to and incl galvanised iron or steel earth lead wire 4 mm dia by mneans of bolts, nuts, check nuts and washers of galvanised iron or steel earthing wire protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board watering pipe shall be 20 mm dia GI medium grade incl excavation and earth work in any type of soil, PCC pit, CI Frame, RCC covers complete.as specied and directed. 31 Surface excavation not exceeding 30 CM deep and averaging 15 CM deep and getting out in soft/ loose soil complete all as specified and directed. 32 Excavation in trenches not exc.1.50m wide and not exc 1.5m deep forfoundation extc or manhole pire hole or laying of sewer pipe etc and getting out in soft/loose soil complete all as specified and directed. 33 Retunning filling in including spreading,levelling,watering and well ramming in layers n.exc 25 cm complete all as specified and directed. 34 Removing excavated materials not exc. 50m and depositing wherecomplete all as specified and directed. 35 M&L for Hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, wateredand rammed to a true surface complete all as specified and directed. 36 M&L Plain cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. 37 M&L Brickwork with sub-class "B" bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. 38 M&L for providing RCC, 1:1.5:3 Mix, Type A1 (Using 20 mm graded stone aggregate) as in Foundations, including raftsfootings, foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and dirceted. 39 M&L for providing RCC, 1:1.5:3 Mix, Type A1 (Using 20 mm graded stone aggregate) as inBeams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and dirceted. 40 M&L for providing RCC, 1:1.5:3 Mix, Type A1 (Using 20 mm graded stone aggregate) as inChajjas complete all as specified and dirceted. 41 S&F MS steel TMT bars 10mm dia and over cutto length ,bent to shaprequired including cranking bending for hooping for column ,hooking ends and bindings with and including mild steel wire (annealel)not less than 0.9mm dia complete all as specified and directed. 42 S&F MS steel TMT bars 6 to 8 mm, cutto length ,bent to shaprequired including cranking bending for hooping for column ,hooking ends and bindings with and including mild steel wire (annealel)not less than 0.9mm dia complete all as specified and directed. 43 M& L for form work to foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed. 44 M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelvesincluding sup- ports, overhangs, etc. also splays between floors and beams, etc.rough finished surfaces of concrete flat complete all as specified and directed. 45 M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges rough finished surfaces of concrete flat complete all as specified and directed. 46 M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. 47 M&L Plain cement concrete 1:3:6 Mix, type C-2 (using 40mm graded crushed stone aggregate) as in 100mm thick flooring finished surfaces even and rough to receive the flooring etc without using extra cement, complete all as specified anddirected. 48 M&L Plain cement concrete 1:2:4 Mix, type B-1, (using 20mm graded crushed stone aggregate) as in 40mm thickflooring finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. 49 M&L Rendering in two layers, first coat 10mm thick in CM 1:6 and second coat 5 mm thick in cement mortar 1:4 (second coat mixed with and including water proofing compound as per manufacturers instructions) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. 50 M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed. 51 M&L for preparing newly plastered/ unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed. 52 M&L for preparing newly plastered surfaces of wall and applying two coats of cement based paint over and including one coat of primer complete all as specified and directed. 53 M&L for structural steel work confirming to Fe-410-0 or Fe-310-0 as in Rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and dirceted. 54 M&L for Plates (plain or chequered) channels,squarecutor notched (ordinaryand countersunk) forming holes, without anyattachment confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed. 55 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 56 M&L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay,complete with glazing bars, dovetailed or welded complete all as specified and directed. 57 M&L for Steel door including projecting type hinges, steelhandle, complete, with glazing bars, dovetailed or welded complete all as specified and directed. 58 S&FPressed steel frames of size 105x60 for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. 59 S&F 3mm thick Sheet glass, ordinary Quality and glazing with oil putty or wooden beads in squareexc 0.5 sq. m in each pane complete all as specified and directed. 60 S&F 0.63 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. 61 S&F2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. 62 S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with nails or stainless steel wire staples complete all as specified and directed. 63 M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. 64 M&L for 75 mm thick PCC using cement concrete 1:3:6 Mix, type C2 (Using 40 mm graded stone aggregate) as in plinth protection, finishing the surface even and smooth without using extra cement complete all as specified and directed.
|
