|
Tender For Repair To Security Wall, Brick Work Plastering Gates Along With National Highway At Mil Stn Samba. ; 1 M&L Rendering 15 mm thick on fair faces of brick or concrete surface wallsin cement mortar 1:4 , rendering is to be finished even and fair without using extra cement with andincluding Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. 2 M&L Brick work with subclass "B" bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar 1:6 including Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable materialfrom the work site ouside defence premises complete all as specified and directed. 3 M&L Brick work with subclass "B" bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricksincluding Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable materialfrom the work site ouside defence premises complete all as specified and directed. 4 M&L Rendering 15 mm thick on fair faces of brick or concrete surface wallsin cement mortar 1:4 , rendering is to be finished even and fair without using extra cementcomplete all as specified and directed. 5 M&L Preparationof newplastered/ concrete surfaces of walls andapplying two coats of cement based paint over and includingone coat of primer complete all as specified and directed. 6 M&L Complete removal of existing treatment from walls and applying two coats of cement based paint over and includingone coat of primer complete all as specified and directed. 7 Dismantling stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar, complete all as specified and directed. 8 M&L designer ceramic colouredExterior wall cladding tiles in vertical surface 8-10 mm thick area exceeding 0.09 sqm and n exc 0.18 sqm, set and jointed in neat cement slurry and pointed inwhite or colored cement to match the surface over and including rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:4 complete all as specified and directed. 9 M&L Black Granitework (table rubbed and polished) for wall lining(veneering to wall) 12mm thick in cement mortar(1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:3 complete all as specified and directed. 10 M&L Providing cement concrete Type B0 1:2:4 (12.5 mm graded aggregate)in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, lightly rounded or chamfered angles and throating, as directed with and including necessary formwork including demolition of Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. 11 M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. 12 Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. 13 M&L Mild steel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. 14 M&L Mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing boltsposts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming toFe-290 Gde E-165, complete all as specified and directed. 15 M&L Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. 16 M&L Applying two coats of synthetic enamel paint over a coat of red oxide including prepration of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described, complete all as specified and directed. 17 M&L Applying one coats of synthetic enamel paintincluding prepration of old steel surfaces of any description, over 10 cm in width or girth, not otherwise described, complete all as specified and directed. 18 S&F in Repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. including taking down old existing wire of any descriptionas directed (each line wire to be measured, complete all as specified and directed. 19 Restraining resecuring including making good staples etc for existingGalvanised, steel barbed wireincluding, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc including taking down old existing wire of any description, complete all as specified and directed. 20 S&F in Repair Concentrina coil with punch tape concentrina coil 610 mm dia having 50 nos spiral turns & 129 nos clips in 6m length and weightnot less than 9 kg excluding spike and handless including taking down old existing wire of any description, complete all as specified and directed. 21 Taking down and refixing the existing Concentrina coilpunch tape concentrina coil of any size and type fixed with new staples and bindingwires, complete all as specified and directed. 22 Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. 23 Formwork to sides of pillars,posts, struts, piers, columns and stanchions, complete all as specified and directed. 24 Formwork to sides of concrete foundations, footings, bases of columns, raft and raft eams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed. 25 M&L Reinforced cement concrete (nominal mix)Type B1 1:2:4(20 mm graded aggregate)in Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns , etc.; basement slabs,under-reamed piles and mass concrete, complete all as specified and directed. 26 M&L Reinforced cement concrete (nominal mix)Type B1 1:2:4(20 mm graded aggregate)in Columns, pillars, piers, posts and struts, complete all as specified and directed. 27 M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. 28 M&L Mild steel TMT bars 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. 29 M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and directed. 30 M&L Machine pressed precast concrete interlocking paver block any shape and sizeconfirming to IS 15658-2006 of 80 mm thickness M-40 Grade, complete all as specified and directed. 31 M&L Coloured Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, complete all as specified and directed. 32 M&L Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed. 33 M&L PCC Type D21:4:8(40 mm graded aggregate)as in sub base to floor and massconcrete including Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed. 34 M&L applying one coat of synthetic enamel paint over cement concrete, brick paving ,stone surfaces of any description over 10cm girth or width, not otherwise described including necessary prepration of old surfaces complete all as specified and directed. 35 Broken glass coping on top of walls In cement mortar 1:3, complete all as specified and directed. 36 Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
|
