|
Tender For Repair To Joinery And Misc Works Under Age B/R-I Of Ge(West) Ferozepur Cantt. ; 1 Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm Each complete all as specified and directed. 2 All as per item No 01herein before but size exceeding 1.5 Sqm and not exceeding 4 Sqm Each. 3 Material and labourfor cutting holes in brick wall built in cement mortar for fixing hold fasts and making good dismantled portion in CM(1:3) or in cement concrete 1:2:4 type B-1 ,depth of embedded portion of hold fasts measured from the face of jamb into wall exc half brick but next one brick all as specified and directed. 4 Material and labour for cement concrete type C1 1:3:6 (20mm graded aggregate) as in hold fast , bed plates, fillling of pressed steel chowkhats and all other similar works complete all as specified and directed. 5 Taking down shutters of any description and refixing in the same opening exc 1 sqm and not exc 2 sqm Each complete all as specified and directed. 6 Material and labour forPressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified. 7 All as per item no 06 above here-in-before but size 125x60mm with double rebate. 8 Material and labour35mm thk,framedpanelled shutters of 2nd class hard wood (any no. of panels) with panels of timber flat on both sides feather edged or of veneeredparticle board medium density wood, with commercial face venners and fitted to chowkats complete all as specified. The size of rails and styles as per IS1003 (Part I) kiln seasoned and chemicallypressure treated. 9 Supply and fixing35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framingplain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat. 10 Supply and fixingof 40mm thick flush door shutter of solid core construction with particle board core both faces are covered with decorative face veneer with lipping /frame to match complete all as specified and as directed. 11 Supply and fixing150 mm long aluminium handles, cast type, anodised complete all as specified and directed. 12 Supply and fixing 300mm long aluminium alloy, anodised sliding door bolt with haps, staple(bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. 13 Supply and fixing150mm long aluminium, anodisedbarrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge. 14 Supply and fixing mild steel 300 mm, ordinary rat tail rod pattern springs, including roler and roller plate complete all as specified and directed. 15 Supply and fixingSolid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010). 16 Supply and fixingFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved. 17 Supply and fixingPTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified. 18 Supply and fixing PTMT butt hinge, 100mm long,fixed with steel screws with brass/bronze hinge pin complete all as specified. 19 Supply and fixing PTMT handle 125mm long fixed with steel screws complete all as specified. 20 Supply and fixing Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to Each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified 21 Supply and fixing Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to Each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed 22 Supply and fixing Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified 23 Supply and fixing 3 mm thick ordinary quality sheet sheet glass glazing with oil puttyand glazing clips fixed complet to wooden/Steel windownot exc .5 sqm in Each pane 24 Supply and fixingin repair to 3mm thick, plainsheet glass ordinary quality and glazing,with oil putty or with wooden beads, in squares n.exc 0.50 Sqm incl. incl hacking out old broken glass and putty/beading complete all as specified. 25 Supply and fixingin repair 5 mm thick ordinary quality sheet sheet glass glazing with oil puttyand glazing clips fixed complete to wooden/Steel/Aluminium window not exc .5 sqm in Each pane incl hacking out old broken glass and putty/beading complete all as specified. 26 Supply and fixing3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in Each pane complete all as speciifed. 27 Supply and fixing8 to 10 mm thickbevelled edge mirror of selected quality glass edges to be polished androunded , onfixed to wall withwooden plugs with chromium plated brass screws and cup washers as fixed in repairs andall as specified and directed by Engineer-in- charge 28 Supply and fixingdressing table mirror fixed of selected quality fixed to wall withwooden plugs with chromium plated brass screws and cup washers as fixed in repairs andall as specified and directed by Engineer-in- charge. 29 S & F Galvanised mild steel wire cloth0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staplescomplete all as specified 30 Supply and fixingin repairGalvanised mild steel wire cloth0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staplescomplete all as specified as in repair. 31 Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide , complete all as specified. 32 Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. 33 Demolition of boarding of any description and in any position complete all as specified. 34 S & F 16-18 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shutters/shelves including magnetic catchercomplete all as spd and directed by Engineer in charge Make : Rajshree, Echon or equallent as approved by GE 35 Supply and fixing using prelaminated partical board of 18/19 mm thick one side decorative face of exterior gradeas in wardrobe and cup board shutters and Shelves etc, all as specified and directed. 36 Supply and fixing2nd class softwood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and directed. 37 Supply and fixingContinuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified. 38 Supply and fixing40mm dia, cupboard brass knob fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed 39 Supply and fixingin repairs 40mm dia, cupboard brass knob fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed 40 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises. 41 Material and labourfor non skid coloured ceramic tiles of7 to 8 mm thick, area of Each tile exceeding 0.11 sq m but not exceeding 0.18Sq min floors set and jointed in neat cement slurry and pointed in white cementmixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed. 42 Material and labourfor non skid coloured ceramic tiles of7 to 8 mm thick, area of Each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skirting/dadoset and jointed in neat cement slurry and pointed in white cementmixed with colour pigment to match andbacking with 10 mm thick in CM 1:4 complete all as specified and as directed. 43 Supply and fixingof Glazed coloured and cereamic tiles in vertical surfaces 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed 44 Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified. 45 S & F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge . 46 S & F in rep of Gypsum Board 8 to 9 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge.Note:-The hanging stay wire shall not be less than 4.00mm thick all are included in the above mentioned item only. 47 Supply and fixingin repairs 50 to 60mmWardrobe aluminium hook (Single) complete all as specified. 48 Supply and fixing in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed. 49 Supply and fixingin repair hydraulicallyextruded aluminium body door closer regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed. 50 Supply & Fixed20mm dia steel curtain rod with fancy type brackets (steel) including with all fittings as fixed in repairs and all as specified and directed by Engineer-In-Charge. 51 Taking down cement plaster inlcuding racking out joints, hacking for keys, scrubing down with water, complete all as specified and directed. 52 Material and labour10 mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished evenand smooth with out using extra cementcomplete all as specified and directed. 53 Material and labourfor Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified. 54 Easing of wooden window shutters/CB Shutters (One Unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolts including necessary nail and screws etc. 55 Easing of wooden door shutters (One Unit shall comprise of one Panelled or Skeleton door shutter irrespective fo number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolts including necessary nail and screws etc. 56 Welding in repairs exc 6mm but n exc 9 cm in length, thickness of metal to be welded complete all as specified and directed by Engineer in Charge complete all as specified and directed. 57 Supply and fixing 600mmX450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with alround aluminium beadingas fixed in repairs and all as specified and directed by Engineer-in- charge 58 Supply and fixing8 to 10 mm thickbevelled edge mirror of selected quality glass edges to be polished androunded , onfixed to wall withwooden plugs with chromium plated brass screws and cup washers as fixed in repairs andall as specified and directed by Engineer-in- charge 59 Supply & fixing PVC cabinet with mirror of size 350x450mmany Colourwith all fixing arrangements as per manufacturer instructionas fixed in repair and all as fixed and directed by Engineer-in-Charge. 60 Supply and fixingbrass CP 20mm dia tabular towel rail, 600mm long between flangesas fixed in repairs andall as specified and directed. 61 Supply and fixingStainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs,in repair complete all as specified. 62 Supply and fixingin repair sheet glassshelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. 63 Material and labourCorner glass shelves 225mm radious,6mm thick as per sample radious for bath room, fixed on suitable support all as directed 64 Supply and fixingstainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen or laboratory with plugs washers38/40mm diaa PVCwaste pipe andincluding 38/40mm dia CP waste coupling fixing cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm complete all as specified 65 Supply and fixingsinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall orincluding fixing cantilever bracketsand connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified 66 Supply & fixedstainless steelplate rack 1.00 mm thick racks of standardqality 900 x 750 x 250mm sizein repair including necessary shelves etc complete as fixed repairs andall as specified and directed as approved by the Engr-in-Charge 67 Supply and fixinggalvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge. 68 Supply and fixinggalvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge. 69 Supply and fixingin repair gunmetal gate valve of 15mm dia with iron wheel head screwed both ends for iron pipe. complete all as specified and directed. 70 Supply and fixingin repair gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe all as specified and directed. 71 Supply and fixingin repair for 15 mm bore fancy type wall /WHB brass CP mixer for mixing hot & cold waterscrewed down for iron pipe complete all as directed. 72 Supply and fixing15mm dia Wash HandBasin mixer (hot and Cold) (Table mounted Model) with extended spot typewith 450mm braided connection pipe (Without POP UP) Make: CERA Cat No:F 3002581/Jaquar Cat NO:CQT-233321B or Equivalent 73 Supply and fixinghot and cold wall mixer Non Telephonic /Non Over head shower type arrangement with connecting legs and wall flanges as fixed in repairs and all as specified and directed by Engineer-In-Charge.Make:-Jaquar Cat No: FLR-5219 N; CERA Cat No:F2004405 or Equivalent 74 Supply and fixinghot and cold wall mixer With Over head shower type arrangement including bend pipe for over head shower with connecting legs and wall flanges as fixed in repairs and all as specified and directed by Engineer-In-Charge. Make:-Jaquar Cat No: FLR-5217 N; CERA Cat No:F2004401 or Equivalent 75 Supply and fixing15 mm fancy type CP Stop cock with long shank and cup (concealed type) screwed down, high pressure with crutch handle both end screwed for iron pipe or union as fixed in repairs all as specified and directed. 76 Supply and fixingas in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unionscomplete all as specified and directed 77 Supply and fixingChromium plated brassfancy typeBib taps15 mm dia boretype with cruth handle, screwed down, screwed for iron pipe or famale as fixed in repairs all as specified and directed. 78 Supply and fixingas in repair 15 mm bore fancy type bib taps long bodycast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed 79 Supply and fixing15mm dia Pillar tap fancy type Chromium plated,cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered HOT or cold with long screwed shanks and fly nuts screwed for iron pipe as fixed to WHB as fixed in repair all as specified. 80 Supply and fixingTwo Way brass CP Bibcock with wall flange50 to 65mm long(facilitate to fix the Halth faucet) (Make:Jaquar) CQTNO;23041/FLR 8041N) /Make: CERA catNo:F3002161 /F2002161 or Equivalent15 mm dia boretype withhandle, screwed down, screwed for iron pipe or famale of quarter turn type as fixed in repairs 81 Supply and fixing15mm bore dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/20mm- 125gms). as fixed in repairs and all as specified 82 Supply and fixing15mm bore dia Bib tap standard of PTMT any colour high pressure screwed for iron pipebut with long body and fixed.(Minimum weight 15mm-120gms/ as fixed in repairs and all as specified 83 Supply and fixing15mm bore dia Fancy type Pillar taps of PTMT any colour high pressures crewed for iron pipe and fixed.(Minimum weight 15mm-110gms) as fixed in repairs all as specified. 84 Supply and fixing15mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe as fixed in repairs all as specified. (Minimum weight 15mm-90gms)® all as specified and directed. 85 Supply and fixing in repair chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union. 86 Supply & fixedreplacement ofpressure JETfor EWC including PVC connection and CP fitting as fixed in repairs and all as specified and directed. 87 Supply and fixingin repairs Health faucet(ABS Body) with 8mm dia1.00 m long flexible tube(PVC /stainless steel coated) and wall hook all as specified and directed by Engineer-in-Charge. 88 Supply & fixed in repairs PVC waste pipe withwaste fittings, 32 mm bore size for sinks,WHB etc with long screwed shanks and fly nuts complete all as specified and directed 89 Supply and fixingPVC waste pipe, 40mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks. as fixed in repairs and all specified and directed. 90 Supply and fixingPVC connection both end brass union and length 450 mm long for 15 mm bore pipe all as specified. 91 Supply and fixingin repair PVC connection 15mm x 600mm size with PTMT nuts complete all as specified and directed. 92 Supply and fixing125mm PTMT grating doom with waste hole of PTMT (minimum weight 40gms) all as specified and directed. 93 Supply and fixingas in repair grating doom100 mm diaof PTMT(minimum 40 gms) complete all as specified. 94 Supply & fixedas in replacement of plastic water closet seat cover coloured pattern with flat bottom, and mild steel chromium plated or aluminised hinging device as fixed in repair complete all as specified. 95 Supply and fixingVitreous china wash down water closet pan ( pedestal pattern) white ( Excluding fixing bolts , flushing cistern and flush pipe as fixed in repairs all as specified and directed. 96 Supply and fixingVitreous china squatting pan ,Orissa pattern size 580X440mm white, with integral foot rests including necessary lime concrete and 110mm bore PVC (SWR) "P" trap with 550 to 600mm long neck for connecting WC to branch piece with cement joints fixed in repair complete all as specified. 97 Supply and fixingin repair Viterous china wash basin, white/coloured, flat back, size 550x400 mm including PTMT wastefittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc and making good distrubed surfaces to match with the existingcomplete all as specified and directed 98 Supply and fixing 10 litres capacity of Low level PVC flush Cistern as fixed in repairs and including of 32mmdia PVC flush pipe to connectfrom flush cistern to water closet ( any pattern) and making good all theJoints all as specified. 99 Supply and fixingRotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete allas specified and as directed. 100 Supply and fixingRotational moulded Polyethylene water storage tank of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete allas specified and as directed. 101 Supply and fixing 15mmdia ball brass valves high pressure with polythene float and flynut complete with all fitting screwed for iron pipe or brass ferrule and fixed to union, nipple, socket etc of size as fixedin repairs all as specified. 102 Supply and fixing 20mm ball brass valves high pressure with polythene float and flynut complete with all fitting screwed for iron pipe or brass ferrule and fixed to union, nipple, socket etc as fixedin repairs all as specified. 103 Supply and fixingspindle for 15mm dia for CP brass fancy Bib Cock as fixed in repairs and all as specified and directed. 104 Supply and fixingspindle for 15mm dia for CPfancy brass Piller Cock as fixed in repairs and all as specified and directed. 105 Supply and fixingSyphon Kit for PVC flush cistern of 10 ltr Capacity as fixed in repairs all as specified and directed. 106 Material and labourfor Cleaning and removing all scale and dirt, etc., from tanks of capacity exceeding 250 Litres but not exceeding 500 litres, including writing letters as CLEANED ON Month and year by using synthetic enamel paint (height of Each letter not less than 5 cm) as affected, including disconnecting existing tank setting aside (or lowering if required ) for repairs,cleaning etc and hoisting if required reconnecting and refixing in position complete all as specified and directed by Engr-in-Charge. 107 Material and labourfor Cleaning and removing all scale and dirt, etc., from tanks of capacity exceeding 500 Litres but not exceeding 1000 litres, including writing letters as CLEANED ON Month and year by using synthetic enamel paint (height of Each letter not less than 5 cm) as affected,including disconnecting existing tank setting aside (or lowering if required ) for repairs,cleaning etc and hoisting if required reconnecting and refixing in positioncomplete all as specified and directed by Engr-in-Charge. 108 Supply and fixingCP Handle for Bib tap as fixed in repairs and all as specified and directed.
|
