Tender For Anganwadi With Four Walls 7Dwm Gram Panchayat 4 Dwm - Excavation Of Soil Upto 1.5 M Depth In Foun ... in India

Work Detail

Tender for Anganwadi with four walls 7DWM Gram Panchayat 4 DWM - Excavation of soil upto 1.5 m depth in foundation, trench, drain, tamping the bottom, pouring water, beautifying the sides, taking out the excavated soil, filling the empty spaces with soil again after filling the foundation and disposal of the remaining soil upto a distance of 50 meters. 2 In cement concrete foundation or floor, put 40 mm nominal size stone aggregate (crusher broken) / brick aggregate in cement-sand mixture in the ratio of 1 cement: 5 sand: 10 soil and tamping, including tampering. 3 Foundation and plinth first class brick masonry in cement-gravel mixture of 1:6, including closing the side cracks and tampering. 3 4 Foundation and plinth masonry of first class brick in cement-gravel mortar 1:6, including closing of side cracks and embankment. Additional amount for masonry work in superstructure upto a height of 4.5 m from plinth level. 5 Masonry work of 112 mm and 75 mm thickness of first class bricks in foundation and superstructure in cement-gravel mortar 1:4, including embankment. 6 Additional amount for making square or rectangular pillars of brick, maximum length upto 1.2 m in superstructure. 7 Centering" Shuttering (planks and sills) for laying RCC roofs, slabs, balcony, lintel etc. upto 4.5 m height and removal etc. as per specifications. Shuttering Steel 8 Cement Concrete Pouring and supply of reinforced cement concrete of 1:1.5:3 mix, pressing, tamping and levelling of surface with 1:3 cement mortar etc. including scaffolding but cost of steel and shuttering separately. 9 Cement plaster on wall using cement-gravel in 1:6 ratio including scraping of joints and regular tamping for 14 days. 12 mm 10 Cutting, bending and fixing of iron at position and fastening work for RCC work including supply. 11 Angle Iron Supply and fitting of 2 pane door of 22 gauge plain GI sheet in 40X40X3 mm outer frame of angle iron with 10 mm grill, 3 mm glass and fittings like argal sliding bolt, latches and catch strips etc. MS sheet analysis for 1X2 sq.m. door. Supply and fitting of 2 pane window of 22 gauge plain sheet in 25X25X3 mm outer frame of angle iron with 10 mm grill, 3 mm glass and fittings like argal sliding bolt, latches and catch strips etc. MS sheet analysis for 1.08 sq.m. window. 13 Supply and installation of 14 mesh, 24 gauge steel mesh in steel window and fixing it with 20 x 3 mm beading and tightening it with screws. Analysis for 0.72 sq. mtr window of size 1.2 x 0.60 mtr 14 P/F steel Girls / Guide bars for Window & ventilators. 15 Polished Kota stone flooring over 1:4 cement gravel mortar of 20 mm thickness, installation and grinding of skirting (minimum 3 times) and joining the joints by filling them with cement slurry etc. From 901 to 2300 sq cm 16 slab brick floor by preparing the base in 12 mm thickness in cement mortar 1.4. 17 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth completePWD BSR Item No.12.23 18 Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including preparation of base with sand papering, primer, putty,etc complete in all respect. including scaffolding and safety provision PWD BSR Item No.12.45 19 Enamel Painting on MS surface more than two coat As per Item No.( 13a+13b) X2.25 20 E/W in filing ordary sandy soil with compaction curing & leveling in plinth area.Lead up to 2km 21 In cement concrete foundation or floor, 40mm nominal size stone aggregate(crusher broken)/ brick aggregate, cement-sand mixture, mixing in the ratio of 1 cement : 6 sand : 12 soil and ramming, including tamping. 22 Laying of 110mm diameter PVC pipe along with other necessary material 23 Add. Name Plate & photograph. 24 Electrice Fitting

Contact Information