Tender For Addition/Alteration To Building No P-206 At Jak Li Rc Under Ge 970 Ews. in India

Work Detail

Tender For Addition/Alteration To Building No P-206 At Jak Li Rc Under Ge 970 Ews. ; 1 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc.or for shafts, wells, cesspits, manholes, pier holes,laying cables, poles etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out as in soft/loose soil complete all as specified and directed. 2 M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. 3 M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/ loose soil complete all as specified 4 M&L for Removing surplus excavated soils to a distance exceeding 250m but notexceeding 500m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified. 5 Demolition of brick work or stone masonry built in cement mortar including all quoins arches pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and as directed. 6 M&L for cutting out bricks built in cement mortar, forming toothing for and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) complete all as specified and directed. 7 M&L for cutting openings, through brick walls built in cement mortar or cement lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc to store and rubbish not exceeding 50m, complete all as specified and directed. 8 M&L for brick work with sub class "B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. 9 M&L for brick work with sub class "B’ bricks, straight on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. 10 M&L for 40 mm thick Damp proof course in cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with integral water proofing compound as per manufacturer"s instructions, to horizontal or vertical surfaces including necessary formwork complete all as specified. NOTE:- Water proofing compound shall be measured and paid separately 11 M&L for providing PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in roof kerbs or mud stops rounded or chamfered on edges , complete all specified and as directed. 12 Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed. 13 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed 14 Use and waste of formwork to sides and soffits of beams, bands and the like for fair finished surfaces of concrete complete all as specified and as directed 15 M&L RCC Type B1 1:2:4 (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels,door openings and the like all as specified and as directed. 16 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) for fair finished surfaces of concrete complete all as specified and as directed 17 M&L RCC TypeB1 1:2:4 (using 20mm graded crushed stone aggregate)for Columns, pillars, piers, posts and strutscomplete all as specified and as directed. 18 M&L TMT steel bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingsteel wire annealed not less than 0.9mm dia or securing with clips, complete all as specified and as directed. 19 M&L TMT steel bars 5mm dia over upto 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingsteel wire annealed not less than 0.9mm dia or securing with clips, complete all as specified and as directed. 20 M&L moorum/ red bajri filling in floors or pavings, laid in layers not exveeding 15cm thick, spread, levelled and rammed including watering, complete all as specified and directed. 21 M&L for broken stone or boulders Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled /rammed to a true surface all as specified. 22 M&L 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base finished even and roughcomplete all as specified and as directed. 23 M&L 100 mm thick PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in floors laid in bays including necessary form work (if any),complete all as specified and as directed. 24 M&L 25 mm thick PCC (1:2:4) type B-0 (using 12.50 mm graded crushed aggregate) as in level course with finishing in cement concrete surface even and rough to receive screed bed,complete all as specified and as directed. 25 M&L for 20mm thick Granite (of any type)work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed of 15 mm thick 1:6complete all specified and as directed. 26 M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. 27 M&L Joint free Non - skid coloured ceramic tiles not less than 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and painted in white or coloured cement to match over screed bed of 15 mm thickin cement mortar 1:6, complete all as specified and as directed. 28 M&L Glazed coloured ceramic tiles in vertical surfaces 450 x 300 x 7mm thickset and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified. 29 M&L formirror polished Kota Stone slab flooring 20-25 mm thick over cement screed bed 20 mm thick in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. 30 M&L for mirror polished Kota Stone slab 20-25 mm thick in riser of steps, skirting, dado and, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with screed bed or bedding layer 10mm thick in cement mortar 1:3and pointed in white or coloured cement to match complete all as specified. 31 S& F selected quality looking mirror bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial plywood, including moulding of all round edges of looking mirror and fixed to wooden plug with appropriate nos CP brass screwed cup washers, complete all as specified and directed. 32 M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth,complete all as specified and directed. 33 M&L for 16mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified. 34 -ditto- all as per Item No. 33 here–in–before, but for 20mm dia (Bore). 35 S&F 20mm dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed. 36 M&L Lagging to pipes used in internal water supply (internal dia of pipe 20mm) or plumbing all round with,25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 all as specified and directed. 37 S&Fin repairs rotational moulded polythene water storage tanks tripple layer(cylindrical vertical with closed top) hoisted and fixed in position 1000 ltrs capacity with and including 25mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gramscomplete all as specified and directed. 38 S&F in repairs vitreous China squatting pan, Orissa pattern including CI trap, size 580 x 440 mm white, with integral foot rests squatt pattern closet also includes setting the trap and pan in cement concrete (1 cement, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified including cutting to the flush pipe and necessary repairs to the floor complete all as specified and directed. 39 S&F in repairs PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Syphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. 40 S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. 41 S&F brass Chromium plated Basin Mixer valveof size 15 mm hot and cold screwed down for iron pipe complete all specified and as directed. 42 S&F in repairs 15mm dia bib taps CP Brass with Capstan head, screweddown, screwed for iron pipe of bore 15mm complete all specified and as directed. 43 S&F Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. 44 S&F Brass chromium platedshower rose 125mm size with 225 mm Flange, swivel joints, including fixing to steel pipe or unioncomplete all as specified and directed. 45 S&F Tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges all as specified. 46 S&F Glass shelf 450 x 125 x 6MM (with ABS Bracket) chromium platedbracket guard and SS railing complete all as specified and as directed. 47 S&F in repairs wash basin of vitreous china counter sunk, size 450mm x 350mm, including brackets,PVC waste pipe 32mm dia,wastecoupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed. 48 S&F Corner Glass shelf 300mm(with ABS Bracket) chromium platedbracket guard 450 x 125 x 6MM and SS railing complete all as specified and as directed. 49 S&F Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm, complete all as specified and directed. 50 S&F in repairs 15mm dia bib taps sink cock swinging spout with flange chromium plated cast copper alloy with crutch or butterfly handle, complete all specified and as directed. 51 S&F towel ring including necessary stain less steel screws, rawl plugs and washers, complete all as specified and directed. 52 S&F Soap Dish Stainless Steel of approximate size 160x160x90mm complete all as specified & directed. 53 S&F Peg Set of 6 Stainless Steel as approved by GE, complete all specified and as directed. 54 S&F PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed. 55 S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors and making good with cement mortar 1:3 or with PCC 1:2:4 complete all as directed. 56 S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors and making good with cement mortar 1:3 or with PCC 1:2:4, complete all as specified and as directed. 57 S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed any length with rubber ring joints fixed to walls and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and as directed. 58 S&F in repairs PVC 110 mm bore Bendcomplete all as specified and as directed. 59 S&F in repairs PVC 75 mm bore Bend complete all as specified and as directed. 60 S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal in110 mm bore 61 S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal in75 mm bore 62 S&F in repairs PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed. 63 S & F in repairs for PVC (SWR) floor/Nahani trap 75 mm dia outlet, plain with grating including jointing with solvent cement to waste pipe, fixed in cement concrete type B-1 (1:2:4), complete all specified and as directed. 64 S&F in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. 65 Taking down chowkats or frames area not exceeding 1.50 sqm each with shutters (without taking off shutters from the frames) complete all specified and as directed. 66 Taking down chowkats or frames area exceeding 1.50 sqm but not exceeding 4.00sqm each with shutters (without taking off shutters from the frames) complete all specified and as directed. 67 S&F solid PVC door frame of size 50x47mm made of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specifications and drawing complete all specified and as directed. 68 S&F Factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications & drawing all as specified and directed. 69 M&L for PCC 1:3:6 type C-1(using 20mm graded crushed stone aggreagte) for bed block for fixing hold fast complete all as specified. 70 M&L Bands, straps, support or staysfor rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to woodtrusses or rafters, knee piece inserts, two way and three way starps, plate washers and smiliar small articles conforming to Fe-290 Gde-E-165, complete all specified and as directed. 71 S&F Box type steel window (Factory made) outer frame made out ERW tube "P" section 65mm x 45mm x 25mm and shutter with glazed openable shutter of ERW tube "P" section 50 mm x 35mm x 20 mm openable (double) shutter with glazed openable shutter on (external side) and wire gauzed openable shutter on (Internal side) with steel pintal hinges, steel handle 100 mm long,steel tower bolt 02 nos on each shutter, stopper of "Z" section and its locking arrangement atsteel hook and eye including 0.56mm dia nominal dia of stainless steel wire cloth average width of aperture 1.18mm dia, 4 mm thick sheet glass window & 4mm figured glass for ventilators and guard bars (MS square bar 12mm square bar), all as specified and as directed.NOTES :- The quoted rate against the above item shall also include :-(i)For provision of one shop coat of zinc chromate primer on all exposed steel surfaces and one oat tar on the ends of steel frame in contact with bricks/ concrete surface.(ii) 04 Nos MS Steel Lugs of 20 x 5mm, MS flat 20 cm long over all welded to frames. (iii) PCC block(1:2:4) for embedding lugs.(iv)0.36mm dia SS wire mesh.(v)4mm thick sheet glass for window(vi)Guard bars. 72 M&L Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary supply and fixing of lugs, Butthinges, lock strike plate, etc complete, size of frame 125x60mm including bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either sidecomplete all as specified and directed. 73 M&L Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary supply and fixiing of lugs, Butthinges, lock strike plate, etc complete, size of frame 105 x 60mm including bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either sidecomplete all as specified and directed. 74 S&F 35 mm thick, factory made 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20(a), fitted to chowkats complete all as directed. 75 S&F 35mm factory made 2nd class hardwood shutters plain framed, panelled shutterwith lock rail and panel of 9 mm BWP commercial ply or 12 mm to 15mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated complete all as specified and directed. 76 S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed. 77 S&F Floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor of length 150mm complete all as specified and directed. 78 S&Fsteel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed. 79 S&F Stainless Steel butt hinges medium weight of size 100 mm fixed with stainless steel screws complete all as specified and directed. 80 S&F 125 mm butt hinges medium weight cold rolledsteel and fixed with screws or weld to steel framecomplete all as specified and directed. 81 S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. 82 S&F 150mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. 83 S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. 84 S&F 250 mm longMild Steel sliding door bolt with hasp and staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. 85 S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labour; articles not exceeding 200 cu. cm each complete all as specified and as directed. 86 S&F Decorative Stainless steeltubular curtain rail of 25mm dia including six nos curtain rings per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and material as approved by GE, complete all specified and asdirected. 87 S&F rolledsteel sections channel, angle, Tee section and in tubular sectionas in main and cross beams, hip and jack rafters;post where connected to common rafters and running rails fixed with angle cleat or other connecting plates conforming to Fe 410-W Gde-E-250, quality A complete all as specified and directed. 88 S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W Gde-E-250, quality A complete all as specified and directed. 89 S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. 90 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, complete all as specified and directed. 91 S&F prepainted aluminium zinc steel sheet (galvalumebase) of thickness0.50mmhaving tensile strength of 550 MPA , in colour and profile as approved by GE and to be factory moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customizedcolour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified and as directed. 92 S&F transparent corrugated polycarbonate sheet 2mm thick (profile matching with galvalume sheets) to be factory moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customizedcolour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified. 93 S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws as specified. 94 Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete all specified and as directed. 95 M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever requiredas per manufacturerer"s instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and faircomplete all as specified NOTE -WPC shall be measured and paid separetely. 96 M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 surface finished even and smooth without using extra cement complete all specified and as directed. 97 Supply only Integral Water Proofing Compound, complete all as specified and directed. 98 M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exceeding 10 cm width or girth including preparation of surfaces complete all specified and as directed. 99 M&L for applying one coat of synthetic enamel paint to old decorated steel surfaces exceeding 10 cm width or girth including preparation of surfaces complete all specified and as directed. 100 M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surfaces exceeding 10 cm width or girth including preparation of surfaces complete all specified and as directed. 101 M & L preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including a coat of primer complete all specified and as directed. 102 M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer white or tinted on old decorated/ undecorated surfaces of wall, complete all as specified and directed. 103 M&L for 1mm thick wallcare putty on old/new surfaces of wall complete all as specified and as directed. 104 M&L for preparation of newly plastered surfaces of walls and applying a layer of wall care putty 2mm thick (averaging), including Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. 105 M&L for complete removal of existing treatment by scrapping down of old surface of wall applying a layer of wall care putty 2mm thick (averaging) , including Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. 106 S&F rolled sections as in framing for cladding, glazing, framing for false ceiling and the like fixed with angle cleats and connecting plates, etc, complete all as specified and directed. 107 S&F 6mm thick Non asbestos fibre cement building boards/Pre laminated self embossed texture designer E-Board classic (Size 0.60m x 0.60m), HPSC (High Pressure Steam Cured) to be fixed or laid/ inserted to existing/ new timber/ GI/ Aluminium/ MS framework with screws as in ceiling, compete all as specified and directed. 108 S&F 18mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work, complete all as specified and directed. 109 M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and patterns as approved, fixed with approved adhesive as per manufacturer"s instructions, complete all as specified and directed. 110 S&F push to open magnetic catches for kitchen cabinet doors complete all as specified and directed. 111 S&F stainless sensys soft close 0 crank concealed slide on cabinet hinge, a base of 12.5 (crank 0 degree) with mounting plate (shutter thickness 15-24mm), complete all as specified and directed. 112 S&F stainless steel decorative cabinet handle 100 mm, complete all as specified and directed. 113 Dismantling boarding any description, fixed in any position with nails, complete all as specified and directed. 114 S&F 20mm thick 2nd class hard wood boarding clean sawn with butt joints, fixed with nails in any situation, complete all as specified and directed. 115 M&L 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection including finishing even and smooth w/o using extra cement including joint tiling with sealing compound grade "A" laid in bays, complete all as specified. 116 M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. 117 M&L for PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in copings, bed plates and the like including weathering, slightly rounded or chamfered angle and throating all as specified and directed. 118 Surface excavation not exceeding 30cm deep and average 15 cm deep and getting out in soft/ loose soil, complete all as specified and directed. 119 M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide with ceiling compound grade "A" complete all as specified and directed. 120 M&L for excavation in trenches, in soft loose soil not exceeding 1.5 metre wide andexceeding 1.5 metre but not exceeding 3.00 metre in depth, for foundation of pole etc or for manholes cesspits, shafts etc not exceeding 10 Sqm on plan and getting out in any type of soil, complete all as specified and all as directed. 121 M&L for cement concete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. 122 M&L for reinforced concrete pipes 150 mm bore, class NP2, laid and jointed complete with collars including testing complete all as specified and directed. 123 Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concret 1:2:4 type B-1 smooth finished, and reforming benching as required, for internal dia of pipe 150mm complete all as specified and directed. 124 M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping benching and the like incuding weathering, slightly rounded or chamfered angles as directed including necessary form work and finishing all exposed surfaces complete all as specified and as directed. 125 M&L precast reinforced cement concret 1:2:4 type B-1(using 20mm graded crushed stone aggregate) in cover slabs (for manholes), shelves and similar articles with plain faces including necessry moulds and setting in cement mortar 1:6 including necessary form work, complete all as specified and directed.NOTE :- Reinforcement to be measured and paid for separately. 126 M&L raking out joints/ pointing to squared rubble stone masonry, coursed or uncoursed built in cement or cement lime mortar as in wall or drain, etc complete all as specified and as directed. 127 M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. 128 M&L walling of random rubble stone masonry, uncoursed, well bonded, built in cement mortar 1:4 in retaining walls, abutments and similar work, complete all as specified and directed. 129 ditto all as per item Ser No 128 here-in-before but except stone, complete all as specified and directed. 130 M&L for flush pointing to stone random rubble masonry, uncoursed, brought upto courses in cement mortar 1:3 as in drain, retaining etc, complete all as specified and directed. 131 Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc, complete all as specified and directed. 132 M&L for RCC hume pipe culverts 300mm dia reinforced NP2 pipe laid and jointed with collars omplete all as specified and as directed. 133 M&L for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and completely surrounding pipes with concrete of bore 300mm on after they are laid and tested complete all as specified and directed. 134 Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface, complete all as specified and directed. 135 S&F hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, fordoors, balusters, nosing to steps including embedding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 136 S&F 2mm thick fibre glass reinforced translucent plain sheeting with fixed with coach screw and washer in roof, wall etc complete all as specified and directed. 137 Taking down carefully copper / alluminium point wiring( light , fan ,socket or power ) complete ,,including fixtures andfitting such as switches , ceiling roses pendants , regulators ,sockets light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should bemade as per condition separately) and making good disturbed surface of wall , floors etc, complete all as specified and directed. 138 Taking down unserviceable any type of Main switch, DB"s including MCBs including wooden/ GI/ MS sheet board etc and removing from site and making good the disturbed surface of wall etc all as specified and directed. 139 Taking down unserviceable any type of copper/ aluminium sub main wiring of any size/ core/ type complete including conduits/ casing etc, removing the materials/ debris and making good the disturbed surfaces of walls, floors and ceilings etc to match with the original existing finish all as directed. 140 M&L for point wiring for one light/ fan/ bell point controlled by way switch complete with PVC insulated unsheathed FRLSH multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC concealed conduit pipe 20mm dia medium grade ISI marked complete with one run of PVC insulated copper conductor cable 1.5 Sqmm single core green colour earth wire and connecting to earth dolly including colour coding of cables shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with terminal boxes concealed on wall, with modular inner & outer cover for fixing of switches/ socket/ regular with screws complete including making good of disturbed surfaces of wall/ ceiling/ floor in same specification as per existing all as specified and directed. NOTES :-(a)Modular cover plates with frame and modular metal flush boxes are paid separately in respected items.(b)Rate of 3 way connector to fix fittings are considered in this item without any extra cost. 141 All as per item Ser No 140 above but one 3 pin socket outlet 5 Amps on the same board with cable 1.5 Sqmm size. 142 All as per item Ser No 140 above but one 3 pin socket outlet 5 Amps on the Independent modular board with cable 1.5 Sqmm size. 143 M&L for concealed point wiring to one 3 pin 15/16 Amps socket outlet independent switch board, using FRLSH (Stranded) PVC insulated ISI marked unsheathed multistranded copper conductor 1100 volts grade of size 2.5 Sqmm alongwith an additional FRLSH PVC insulated unsheathed multistranded copper conductor 1100 volts conduit of minimum 20 mm dia by cutting chases for conduits and sinking"s for boxes and making good to walls, floors etc for concealed conduit wiring suitable for modular flush box metal of GI sheet minimum 1.2 mm thick with earth terminal for safety, flush metal GI box of required modules as per site requirement and modular cover plate with support frame white in colour of required modules, 3mm thick including all fittings i.e. tees, bands and junction boxes, screws etc, complete for power point controlled with cables, 2.5 Sqmm size, cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate complete (2.5 Sqmm for phase and neutral and 2.5 Sqmm for earthing). 144 S&F modular metal flush box for 3 module complete all as specified and directed. 145 S&F modular metal flush box for 6 module complete all as specified and directed. 146 S&F modular metal flush box for 8 module, complete all as specified and directed. 147 S&F Modular White cover plate with frame 3 module, complete all as specified and directed. 148 S&F Modular White cover plate with frame 6 module, complete all as specified and directed. 149 S&F Modular White cover plate with frame 8 module, complete all as specified and directed. 150 S&F Modular switch 1 way 10 Amps, 1 module, complete all as specified and directed. 151 S&F Modular socket 6A 2/3 pin combined, 2 module, complete all as specified and directed. 152 S&F Modular switch 1 way 16 Amps, 1 module, complete all as specified anddirected. 153 S&F modular socket 6A/ 16A/ 2/3 pin combined 2 module, complete all as specified and directed. 154 S&F in repairs ceiling rose surface bakelite 65 x 50 mm, three terminals, 240 volts, complete all as specified and directed. 155 S&F in repairs of tube light fitting 1 x 22 watts 4 feet with LED batten with polycarbonate housing and integrated electronic driver including LED tube light white colour complete including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed. Make : Havells cat part No. ENDURALINEARNEOBS22WLED865SPCWH or equivalent in Bajaj/ Crompton/ Philips. 156 S&F in repairs lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fitting of LED lamp 9 watt, complete all as specified and directed. 157 S&F in repairs LED lamp 9W, complete all as specified and directed.Make : Bajaj Cat part No. 9W CDL B or equivalent in Havells/ Crompton/ Philips.. 158 Supply and fixing ceiling fan complete with blades, down rods and accessories, 230 V, 1200mm sweep, Minimum air delivery 210 CFM with service value 6.00, BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. 159 Supply and fixing exhaust fan made of sturdy engineering plastic, complete with louvers shutter, voltage230V, 50 Hz, RPM 1200, copper winding of sweep 300mm including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/ 0.0076, complete all as specified and directed. 160 Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece including old unserviceable geyser deposited to MES/ EM store yard complete all as specified and directed. 161 Supply and fixing stepped type electronic fan regulator (should be suitable for ceiling fan in schedule item No 175) on the existing phenolic laminated sheet etc, as required at site complete all as specified and directed. 162 Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts, complete all as specified and directed. 163 S&F sheet metal enclosure double door for DBs when MCCBs to be used TPN-4 Way 415 volt with 200 Amp rated bus bar complete all as specified and directed. 164 S&F DB with sheet metal enclosure 240 volts, 8 way with 200 Amp rated bus bar single pole & neutral double door type for MCBs including mounting work as required in position, complete all as specified and directed. 165 S&F 415V 10KA "B" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. TPN 63 Amp complete all as specified and directed. 166 S&F MCB SPN 40 Amps 230 volts C curve, 50 hz AC 10 KA complete all as specified and directed. 167 S&F MCB SP 06 to 32 Amps 230 volts C curve, 50 Hz AC 10 KA complete all as specified and directed. 168 M&L for earthing complete with galvanised steel earth plate, electrode, 600 x 600 x 6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts & washers of GI as shown in electrical plate No. 5 of SSR Part-I connected to earthing test point all as specidied and including necessary earth pit in PCC 1:3:6 chamber with 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe medium grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia upto 7.5 from the earth plate electrode& refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber all as specified and directed including dismantling existing earthing and testing on completion. 169 M&L for sub main wiring using FRLS insulated unsheathed, multistrand copper conductor FRLS PVC cable 2 runs of size 2.5Sqmm for phase and neutral and 2.5Sqmm for earthing drawn through rigid PVC conduit of suitable size fixed on wall/ gound/ ceiling etc., and complete allas directed.NOTE : Phase should be Red/ Yellow/ Blue, neutral should be black and earthing wire should be green in colour. Two runs of cable for phase/ neutral and one run of cable for earth including conduit will be measured and paid as one unit length. 170 M&L for sub main wiring using FRLS insulated unsheathed, multistrand copper conductor FRLS PVC cable 2 runs of size 4Sqmm for phase and neutral and 4Sqmm for earthing drawn through rigid PVC conduit of suitable size fixed on wall/ gound/ ceiling etc., and complete allas directed.NOTE : Phase should be Red/ Yellow/ Blue, neutral should be black and earthing wire should be green in colour. Two runs of cable for phase/ neutral and one run of cable for earth including conduit will be measured and paid as one unit length. 171 M&L for sub main wiring using FRLS insulated unsheathed, multistrand copper conductor FRLS PVC cable 2 runs of size 6Sqmm for phase and neutral and 6Sqmm for earthing drawn through rigid PVC conduit of suitable size fixed on wall/ gound/ ceiling etc., and complete allas directed.NOTE : Phase should be Red/ Yellow/ Blue, neutral should be black and earthing wire should be green in colour. Two runs of cable for phase/ neutral and one run of cable for earth including conduit will be measured and paid as one unit length. 172 Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable 25 Sqmm 3.5 core with aluminium conductor laid in trenches/ pipes, fixed to poles/ walls with suitable saddle including taking out old unserviceable cable complete all as specified and directed. 173 Supply and laying dry river sand laid in trenches as in cable cushioning and covering, complete all as specified and directed.NOTE : Punned thickness only measured and paid. 174 M&L for brick wall burnt locally available sub class "B" laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable, complete all as specified and directed. 175 Taking out/ taking down unserviceable damaged GI/ PPR pipe of following sizes from excavated trenches including removing of fittings all as directed for necessary replacement/ relaying serviceable GI pipe all as directed :- 176 (i) Size of 35 mm dia 177 (ii) Size of 50 mm dia 178 Supply and laying of PPR pipes 3-layer SDR 7.4 of outer dia of pipes as following UV stabilised and antimicrobial fusion welded having thermal stability for hot and cold water supply all PPR plain & brass threaded polypropylene random fittings laid in trenches including fittings and testing complete all as specified and directed :- 179 (i) Size of 25 mm dia 180 (ii) Size of 50 mm dia 181 M&L for construction of Brick Masonry valve chamber of size 600 x 600 x 600mm (Internal dimensions) with PCC 1:4:8 foundation 150mm thick, brick work built in CM 1;6, PCC 1:3:6 coping 50mm thick, plastering 15mm thick in CM 1:6 to all internal and exposed surfaces including excavation earthwork in hard/ dense soil, MS sheet cover 4mm thick and MS equal angle iron 50mm x 50mm x 6mm frame as per existing size with locking arrangement embedded in PCC suitable for 25/ 40/ 50mm gate valve and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc complete including dismantling old/ damaged vlave pits. 182 Making connection of PPR distribution branch with PPR main of sizes 50mm to 75mm by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed. 183 Taking out unserviceable Gate valves from water pipe line for necessary replacement all as directed for valve size 15mm to 32mm all as directed. 184 Taking out unserviceable Gate valves from water pipe line for necessary replacement all as directed for valve size 40mm to 80mm all as directed. 185 Supply and fixing PPR gate valve (brass insert) of size 25mm dia including connection and testing, complete all as directed. 186 Supply and fixing PPR gate valve (brass insert) of size 50mm dia including connection and testing, complete all as directed. 187 S&F Flat strip clamps of size 25mm x 3mm duly bended as per the size of GI tubing and site conditions, drilled all as directed. 188 Supply and fixing of heavy rust proof passivated bolts of steel of size 8mm dia 75mm long including necessary drilling on wall for fixing of steel frame all as directed. 189 NOTE :-An amount of Rs. 58,926.00 on account of Credit Schedule for Schedule "A" Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

Contact Information