|
Supply Of Furniture-Supplying and placing in position Main Table with ERU of the following specifications.1800 x 2100 x740 MAIN WORKTOP :Made of 43mm Thick (±1) combination of MDF and particle board with top veneer facecoated with clear lacquer. All edges are edge banded with matching 1mm thick veneerlipping.LEATHER PAD:Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. Thisleather pad is fixed to main top panel. DRAWER UNIT:Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination ofMDF and particle board with top veneer face coated with clear lacquer. All thicknessedges are edge banded with matching lipping.Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade andapproved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thickPVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on topsurface.Drawer unit is provided with soft closing channels for smooth opening and closing.Drawer unit is secured with side central lock.MODESTY:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Modesty is fitted with aluminum trims.ERU WORKTOP :Made of 43mm Thick (±1) combination of MDF and particle board with top veneer facecoated with clear lacquer. All thickness edges are edge banded with matching lipping.UNDERSTRUCTURE AND ERU HINGE DOOR UNIT:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Door is fixed with soft closing hinges and handle is provided for ease of opening.ERU is secured with side central lock.ACCESS FLAP WITH POWER BOX:Soft closing access flap with power box contains 3 Universal Sockets, 2 USB powerpoints, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6connections. The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. 3 Providing, supplying and placing of Visitor Chair. SEAT /BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D) Visitor TUBULAR FRAME: The tubular frame should becantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should beconnected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair Seat Height -44.8cm Height -98.2cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.2 cmThe product must have in house test certificate. This particular product should have its own GREENPRO by CII, GREENGUARD by UL, BIFMA LEVEL 2, GRIHA and Indoor Advantage Gold by SCS Certficates. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.This particiular product should have Greenpro by CII, Greenguard by UL , Griha, Indoor advantage Gold by SCS and Bifma lvl2 certifications. 4 Providing, supplying and placing of Glass door storage unit. Overall size Shall be916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It shall have a brass handle and a 2 way locking mechanism with shooting bolt .It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.The product must have in house test certificate and this particular product should have itown Indoor Advantage Gold by SCS Certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. 5 Providing, supplying and placing of storage unit whose overall size Shall be 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.The product must have in house test certificate and this particular product should have its own Greenpro by CII, Greenguard by Ul , Griha and Indoor Advantage Gold by SCS Certificates. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. 6 Providing, supplying and placement of computer table whose overall size shall be1200Width mmx 600 Depth mmx 750 Height mm . TABLE MATERIAL : The Table Panels shall be made from 18 ±0.5mm thk Pre-Laminated Exterior grade PLT ( Grade I,Type-II )(IS 12823) with PVC edge banding on all sides. Drawer bottom panels shall be made up of 9mm thick (±1mm) Pre-laminated Particle Board. Locking shall be provided on top drawer only. CONSTRUCTION Table shall have provision of CPU monitor, Drawer and Sliding KBPT. The Table shall have a knock-down construction.The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. 7 Providing, supplying and placing of Very High Back Chair. SEAT/BACK ASSEMBLY: The seat/back should bemade up of 1.2 ±0.1cm. thick hot pressed plywood measured andupholstered with fabric and moulded Polyurethane foam with PVC lipping all around.The back foam should bedesigned with contoured lumbar support for extra comfort. HIGH BACK SIZE 56.0 cm. (W) x 88.0 cm. (H) SEAT SIZE56.0 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should bemoulded with density = 45±2 kg/m3/ and Hardness load 16 ± 2 kgffor 25% compression. ARMRESTS: The one-piece armrests made of black integral skin polyurethane with 50-70 Shore ‘A’ Hardness and reinforced with M.S. insert.The armrests should bescratch and weather resistant.The armrests should befitted to the seat with seat/armrest connecting strip assembly made of 0.5 ± 0.05 cm. thk. HR steel. CENTER PIVOT mechanism: The mechanism should bedesigned with the following features: •360° revolving type. •17°±2°maximum tilt on pivot at center. •Tilt tension adjustment. •Upright position locking PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 12.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow should be3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should beinjection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal pitch-center diashould be66.3 ±0.5cm.(76.3 ±1.0 cm with castors). TWIN WHEEL CASTORS:The twin wheel castors should beinjection moulded in black Nylon. Overall Dimensions of Chair Seat Height - min 41.0to max 53.0cm. Height - min 117.5 to max 129.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificate 8 Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The seat and back should bemade up of 1.2 ±0..1 cm. thick hot pressed plywood and upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam should bedesigned with contoured lumbar support for extra comfort. BACK SIZE: 49.5cm. (W) X 69.5cm. (H) SEAT SIZE: 49.5cm. (W) X 43.0cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should bemoulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression. ARMRESTS: The one-piece armrests made of black integral skin polyurethane with 50-70 Shore Hardness and reinforced with M.S. insert. The armrests should bescratch and weather resistant . The armrests should befitted to the seat with seat armrest connecting bracket made of 0.3 ±0.022cm. thk. HR steel. CENTRE PIVOT mechanism):The center pivot mechanism should bedesigned with the following features: • 360° revolving type. • 17° ±2°maximum tilt on pivot at cerntre. • Tilt tension adjustment. • Upright position locking. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow should be3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should beinjection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel. castors. The pedestal should be66.3 ±0.5cm.(76.3 ±1.0 cm with castors). TWIN WHEEL CASTORS: The twin wheel castors should beinjection moulded in Black Nylon. Overall Dimensions of Chair Seat Height - min 43.4 to max 55.4cm. Height - min 100.9 to max 122.9cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCScertification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. 9 Supplying and placing in position office table of the following specifications.Its size shall be1365Widthx 680Depthx 735Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mmthick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic.The product must have in house test certificate and should have Greenpro by Cii, Greenguard by Ul, Griha and Indoor advantage gold by SCS Certificate. The particular product should have its own GREENPRO by CII, GREENGUARD by UL,GRIHA and Indoor Advantage Gold by SCS Certficate.Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. 10 Supplying and placing in position office table of the following specifications. Worktop-Made of 25mm Thick Pre-laminated board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members-Cross Members in Unitised T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap positionThe product must have in house test certificate and this particular product should have its own Greenpro by Cii, Greenguard by Ul, Griha and Indoor advantage gold by SCS Certificate.Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. 11 Supply, Fitting & Fixing of Filing cabinet whose overall size shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in Filing cabinet. The Centralized locking System shall be provided alongwith Shooting Bolt Mechanism and 10 Lever Cam Lock. The Filling cabinet should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10).The product must have in house test certificate and this particular product should have its own Indoor Advantage Gold by SCS Certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. 12 Providing, supplying and placing of Mid Back Chair. SEAT/BACK ASSEMBLY: The seat should bemade up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should bemade up 1.2 ±0.1cm. thick hot pressed plywood and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should bedesigned with contoured lumber support for comfortable seating posture. BACK SIZE:48cm.(W) X64.5cm.(H) SEAT SIZE:51.0cm.(W) X 48.0cm.(D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should bemoulded with density = 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgffor 25% compression. ARMRESTS :The armrest top should bemade of moulded polyurethane (P.U) and mounted on to a drop lift height adjustable type M.S. tubular armrest support chrome plated. The armrest height should beadjustable up to 6.5±0.5cm. in 5 steps . KNEE TILT SYNCHRO mechanism WITH SEAT DEPTH ADJUSTMENT mechanism: The mechanism should bedesigned with the following features: •360° revolving type single point control. •Front pivot for tilt with feet resting on ground ensuring more comfort. •Tilt tension adjustment. •4-position locking with anti-shock feature. •Seat back tilting ratio of 1:2•Seat depth adjustment of 6.0 ±0.5cm. can be locked in 6 positions ADJUSTABLE BACKREST: The backrest consshould be ts of a sliding up down mechanism, which can be adjusted in the range of 7.5±0.5cm. and can be locked in 5 positions for correct position of lumber support. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 10.0 ±0.3cm. PEDESTAL ASSEMBLY:The pedestal should befabricated from 0.2 ± 0.02 cm thick HR sheet ( should be: DD 1079 / HRskin pass ),chromeplated and assembled with injection moulded black polypropylene hub cap and 5 nos. twinwheel castors. The pedestal should be66.0±0.5cm. Pitch-center dia. (76.0±1.0 cm with castors).TWIN WHEEL CASTORS The twin wheel castors should beinjection moulded in black Nylon. Overall Dimensions of Chair Seat Height - min 47.5 to max 57.5cm. Height - min 93.4 to max 110.4cm. Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm.The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage Gold by SCS certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.
|
