Tenders Are Invited For Building Construction Work – Construction Of A Biomass Combustion And Biogas Process ... in Germany

Work Detail

Building Construction Work – Construction Of A Biomass Combustion And Biogas Processing Plant At The Weißenfels Composting Plant Lot 2: Roofing Of The Branch Cuttings And Compost Storage. Lot 2: Roofing For Branch Cuttings And Compost Storage ------------------------------------------ ------------------------- A Covered Warehouse Closed On Three Sides With A Floor Area Of ​​786 M² Was Planned, Built From Partition Walls And Fill Walls With An Attached Arched Roof . The Supporting Structure Of The Roof, Consisting Of A Metal Structure, Is Placed Directly On The Fill Walls. The Storage Areas Are Each Spanned By An Arch-Shaped, Cantilevered Roof Structure And Designed As A “Non-Hard” Roof. The Covered Branch And Green Waste Storage Is Divided Into Two Halls, Each With An Attached Arched Roof And Can Be Found In The Plans With The Drawing No.: P21 010 5 Gs 04.2 And P21 010 5 A 05.2. Construction Data: - Building Dimensions: Approx. 48.00 M Rear Wall Approx. 21.00 M Side Walls Approx. 21.00 M Partition Wall - Total Length Of Partition Walls: Approx. 105.00 M - Height Of The Partition And Fill Walls 5.00 M - Building Heights ( Roofing): Ridge Height 14.00 M Above Gok Eaves Height 5.00 Above Gok Foundation: - Erection Of Partition And Fill Walls On An Asphalt Surface Built By An Tiefbau Support Structure: - Self-Supporting, Galvanized Steel Structure Placed On The Outer And Inner Walls Fill Walls: - Designed As Fill Walls Made Of Mobile System Elements Made Of Metal Or Concrete, Which Are Placed On The Asphalt Surface And Anchored If Necessary - Metal Fill Walls Made Of Sheet Steel Grade S235 – S355 With Sand/Gravel Filling Or Similar, E.G. Made Of Concrete Blocks - Height Of The Bulk Walls 5.0 M - Width Of The Bulk Walls According To Static Requirements - Filling Of Bulk Walls: Filling Of The Bulk Walls With Sand, Gravel, Gravel, Building Rubble Or Comparable Material Density Of Filling Material At Least 1.8 T/M³ Filling Up To Approx. 10 Cm Below Ok Partition Walls Partition And Bulk Walls: - Designed As Partition And Bulk Walls Made Of System Elements Made Of Metal Or Concrete, Which Are Placed And Anchored On The Asphalt Surface. Supporting Structure Roof: - Galvanized Steel Construction Placed On The Outer And Inner Walls Roof: - No Hard Roofing In Accordance With § 32 Bauo Lsa - Arched Roof Made Of Pvc-Coated Polyester Film (Approx. 650 G/M²) - Arched Roof, Covered With Tarpaulin And External Rainwater Downpipes Electrical Engineering: - Installation According To Vde 0100 Lightning Protection: - Production Of Earth Electrodes - Connection Of The Building To The Connecting Lugs And Lightning Protection Devices On The Building - Lightning Protection Class Ii Drainage: - Rainwater Is Fed Into The Traffic Drainage System

Contact Information