|
Tender For Construction Of Store Boundary Wall For Aen (Rural) Improvement Of Sanitary System And Misc. Development Work At 33 Kv S/S Churu(R/W) Ubn Jvv2425wsob00750 Const. Of Store Boundary Wall For Aen (Rural) Improvement Of Sanitary System And Misc. Development Work At 33 Kv S/S Churu(R/W) Ubn Jvv2425wsob00750 - 1 (B 2/1.8) Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils. 2 (B 11/3.1.7) Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level1:5:10(1 cement : 5 coarse sand :10 graded stone aggregate 40 mmnominal size). 3 (B26/6.1.7) Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in :cement mortar 1:6 ( 1 cement : 6 coarse sand ). 4 (B21/5.2.3)Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement Mortar 1:6 (1-Cement:6-coarse sand). 5 (B115/12.3.2)Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick. 6 (B115/12.2.2)Plaster on new surface on walls in cement sand moprtar 1:4including racking of joint etc. complete fine finished: 20 mm thick. 7 (B107/11.3.1) Cement concrete flooring grade 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate) finshed with a floating coat of neat cement i/c cement slurry,making of lines or grooves etc. but excluding the cost of nosing of steps etc. complete : 40 mm thick with 20mm thick nominal size aggregate 8 (B101/10.12.2)Providing stone slab covering over drains including filling of joints in cement sand mortar 1:3 with 35mm thick cement concrete flooring 1:2:4 mix complete with good finish with : Stone slab 60 to 75mm thick average 9 (B95/9.18.2) Providing and fixing M.S. sheet single leaf door shutter in angle iron frame 35x35x5mm suitability diagnoally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats : including two caots of anti-corrasive red oxide primer paint. M.S. Sheet 20 S.W.G. 10 (B95/9.18.2 & 9.18.3) Providing and fixing M.S. sheet double leaf door shutter in angle iron frame 35x35x5mm suitability diagnoally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats : including two caots of anti-corrasive red oxide primer paint. M.S. Sheet 20 S.W.G. 11 (B100/10.8) Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. 12 (B 116/12.6)Finishing with neat cement (punning) 13 SITC of ISI mark (IS:8472) self priming mono block pump set of approved make. TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase (180 to 240 V) including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively.Self priming pump,1.0 /1.1 HP, 1-O, (10-50) M tr (53-6.5) LPM(E260814) (Group 1)P-160 14 (B6/1.36)Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 15 (B118/12.30.1)Pointing on Brick maosnry in cement sand mortar 1:3 (1 cement : 3 sand) Flush or rulled Sunk or weather struck pointing 16 (B94/9.10) Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdflast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. 17 (B93/9.2)Structural steel work riveted, bolted or welded in built up sections, trusses and framed work including cutting, hoisting (height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. 18 (B97/9.31,9.33) Add for using galvanized barbed wire instead of black barbed wire. 19 (B-11/3.1.3) Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 20 (B-12/3.1.3,3.3) Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to Suerstructure M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 21 (B-13/3.11) Providing&fixingprecastcementconcretecoping1:2:4mix50mmthickcompleteas per specification : 50 mm thick. 22 (B-13/3.10.1) Providing and laying damp-proof course with cement concrete grade M-15 (1:2:4) mortar prepared with 1% solution of water-proof compound complete as per specification 50mm thick. 23 (B120/12.45)Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). 24 (B121/ 12.50.1) Painting with synthetic enamel paint of approved brand and manufacture togive an even shade :Two or more coats on new work. 25 (B125/13.2)Repair to brick masonary in cement sand mortar with taking out of Deceayed from wall and replaceing with new briks.Cement Sand Mortar 1:6. with new brick. 26 (B126/13.15.1)Renewing glass panes, with puty and nails wherever necessary: 4 mm thick plain glass panes. 27 (S30/3.15.3)P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant110mm dia 28 (B111/11.22)Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles includingrubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) 29 (B82/8.18.2.1)Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’,30 mm thick shutter,Commercial Veneer both side 30 (B21/5.8.3)Half brick masonry in superstructure above plinth level upto floor five level using F.P.S. bricks of designation 75 ,Cement mortar 1:6 (1-Cement:6-coarse sand). 31 (B128/13.33)Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. 32 (B-129/13.37)Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :(A) Style / rail of teak wood 30mm thick/ Aluminium Section(i) 4"wide 33 (B-129/13.37)Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :(A) Style / rail of teak wood 30mm thick/ Aluminium Section(ii) 6" wide 34 (B-129/13.37)Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged (B)Panel by:(i) Shuttering Ply - 9mm thick (Commercial) 35 Providing and Fixing Unplasticized Poly Vinyl Chloride [UPVC] SWR Pipes for Sciland waste discharge system [IS: 13592 : 1992 Marked] of approved quality/ make.Type A (3.42.1) 110 mm dia(S39/3.42.1.2) 36 (B98/9.37)Supply & fixing steel shutter (Almirah type) with 18 gauge steel border & steel shutter including locking arrangement and painting etc. complete fixed on wall with joint fast (iron clip) 37 (S18/2.26.3) P/F PVC Storage Tank (IS : 12701 Marked indicating the BIS license No), of approved quality make with cover, 25 mm dia 1M long G.I. over flow pipe & 25 cm. long wash out pipe with plug & socket,includingplacing on terrace( at all floors),making connection etc.,complete of approved design .500 litres capacity. 38 (S33/3.17.1&3.29&3.31.3) Construction of manhole in all type of soil inner size 90 X 60 Cm. 300/ 345 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 400mm thick M-15 grade C.C.flooring , RCC cover of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth upto 0.5mtr 39 (S1/1.2.2) P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor :Size 580x440 mm. 40 (S5/1.38.2) P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall :Size510mmx400 mm 41 Providing and fixing G.I. pipes complete with G.I. fittings and clamps(IS 1239 mark), including cutting and making good the walls etc. Iinternal work - : Medium Duty Pipes (a) Exposed on wall "B" Class(a) 15 mm dia nominal bore (S11/2.1.1) 42 Providing and fixing G.I. pipes complete with G.I. fittings and clamps(IS 1239 mark), including cutting and making good the walls etc. Iinternal work - : Medium Duty Pipes (a) Exposed on wall "B" Class(a) 25 mm dia nominal bore (S11/2.1.3) 43 (S12/2.2.1)ProvidingandfixingG.I.pipescompletewithG.I.fittings (IS1239mark)includingtrenchingandrefillingetc.(externalwork):Medium Duty Pipes B class15mm dia nominal bore 44 (S12/2.2.3) 25 mm dia nominal bore 45 (S13/ 2.7.3) P & F Bib Cock (IS:8931 Mark) Superior quality of approved make( B ) CP Brass bib cock 15 mm nominal bore. 46 (S14/2.8.1) P & F Stop cock (IS:8931 Mark) superior quality & of approved make Brass 400 gm. 15 mm nominal bore.: 47 (S14/2.11.1)P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete :Brass wt. 400 gm, 15 mm. 48 (S15/2.13.3) P & F 15 mm. Dia Connection pipe of approved quality/make:PVC pipe with C.P. Brass nuts 450 mm. 49 (S12/2.3.1) Making connection of G.I. distribution branch with G.I. main including all fitting.Up to 25 mm dia. 50 (B41/7.10.1) P&F Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in charge in skiriting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete.Category - I : Kajariya, Jhonson, Orient, Somani make etc. 51 (B42/7.11)Providing and laying Ceramic MAT floor tiles(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown of any size, laid on 20 mm thickbed of cement mortar 1:4 (1 cement : 4 coarse sand)including pointing in white cementmixed with pigment of matching shade complete. 52 (B93/9.5) Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:2:4 (1-Cement:2-coarse sand:4-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 53 (E171103) P/F of ventilating fans , capacitor start single phase with PVC impeller ABS body automatic openable louver shutter in existing opening i/c making connection , testing etc as reqd. 250mm sweep Gr-2 54 (B119/12.31)Pointing on stone slab ceiling with cement mortar 1:3 (1-cement:3-Sand) Flush or ruled pointing. 55 (S34/3.20.3) Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. :Size 240 Cm. dia outside & 240 Cm. depth. 56 Supplying and drawing F RPVC insulated and unsheathed Flexible copper ISI markedconductor (IS : 694) of 1.1 KV grade of approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.(E040100)2x4.0 sq. mm + 1x 2.5 sq mm ( E 040117) (Group 2) 57 E040500Supplying and fixing of power plug point accessories on 18SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection, testing, etc. as required.(E040500 ) P- 16Gr-2 58 (B 101/10.13) Providing and fixing 20 mm thick precast terrazo tiles of approved make, with marble chips of size upto 6mm laid over roof with neat cement slurry mixed with pigment to match the shade of the tiles, including cutting ,grinding rubbing with machinecomplete on 20 mm thick bed of cement sand mortar 1 : 4. 59 Excavation in Soil with Dozer with lead upto 100m Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.R 12, 3.5 (ii ) 60 Carriage of earth, sand, lime ,morrum, manure or sludge with all lead and lift complete G 53, Chapter G 5 61 (B29/6.16.4)Supplying and fixing machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges:Kota stone 25 to 30 mm thick 62 Providing non-asbestos high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (As per IS: 14871) roofing upto any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete excluding the cost of purlins, rafters and trusses corrugated sheets and including cutting to size and shape wherever required Above 600 pitch.(B102 /10.23) 63 Providing & fixing anodizing aluminium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately).(A) For Fixed portion : Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) (B147/16.1.1.1) 64 (B) For shutters of doors, windows & ventilators incl. providing and fixing hinges/ rollers etc. and making provision for fixing of fittings wherever reqd. (lockes shall be paid for separately).Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) (B147/16.1.2.1) 65 (B148/16.4)P&F double action hydraulic floor spring of approved brand and manufacture to aluminium door shutter confirming to IS : 6315 incl. costof cutting floors as reqd. embedding in floor and cover plate etc. complet as per direction of Engineer in charge. 66 (B148/16.3.2)Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.)with glass panes of 5.0mm thickness (weight not less than 13.75 Kg/Sqm) as per IS : 2835 67 (B148/16.6)Providing and fixing brass lock without handle for aluminium door, or approved quality, make & design as directed by Engineer incharge 68 (B43,48/8.6.3 ( D) X )Providing and fixing fully paneled double leaf shutter for doors as per approved design and drawing with approved ordinary C.P./oxidized steel fittings as per Annexure – A’ and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mmx12mm on both faces complete :35 mm thick Hollock wood grade - I ,Wire gauge 24 gauge 14 mesh of IS designation 85 gauge wires of dia 0.56 mm panels 69 Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls in :Cement Mortar 1:6 (1-Cement:6-Sand)Wall up to 30 Cm. and less thickness.(B26/6.2.7,6.3.2)
|
