|
Special Repairs To E-07 To E-11 E-14 E-24 E-25 And E-134 At Drdo Township Under Ge I Rnd Kanchanbagh Hyderabad-- 1 Dismantling tiles work in floors and roof laid in cement mortar including stacking materials within 50 metres lead, thickness of tiles 8mm to 25mm complete all as specified and directed . 2 M&L for providingand laying coloured ceramic glazed floor tiles of size 300mm x 300mm, 7 to 8mm thickness of 1stquality conforming to IS : 15622 of approved shade exceptwhite ivory, Grey, fume Red Brown, laid over and including on 20mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/ Sqm incluidng pointing the joints with white cement and matching pigment etc complete all as specified and directed . 3 M&L for providingand fixing Ist quality coloured ceramic glazed wall tiles conforming to IS : 15622 of size 300mm x 200mm & 7 to 8mm thicknessof approved shades except burgundy, bottle green, black as in skirting, risers of steps and dados, laid over and including on 12mm thick bed of cement mortar 1:3 (1 cement ; 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per sqm, incluidng pointing in white cement mixed with pigment of matching shade complete all as specified and directed . 4 M&L for providing and laying Double chargedvitrified coloured tiles of size 600mm x 600mm and 10mm thicknessas in floorswith water absorption less than 0.08 % and conforming to IS : 15622 of approved brand and shade, laid over and including on 20mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.3 kg/Sqm incluidng grouting the joints with white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed. 5 M&L for providingand laying Double chargedvitrified coloured tiles of size 600mm x 600mm and 10mm thicknesswith water absorption less than 0.08% and conforming to IS : 15622, of approved make & shade, as in skirting, riser of steps , laid over and including on 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg / Sqm including grouting the joint with white cement & matching pigments etc complete all as specified and directed. 6 M&L for providingand fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone slab colour black/chery / ruby Red for kitchen platforms, vanity counters, window cills, facias and similar locations of required size, approved shade, colour and texture laid over and including 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joint treated with white cement mixed with mateching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to edges to give high gloss finish etc at all levels complete all as specified and directed. 7 M&L for providing and fixing white vitreous china pedestal type water closet ( European type WC pan) with white solid plastic seat and lid( ISI marked) and 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device ( handle lever), conforming to IS : 7231, with all fittings and fixtures including cutting and making good the walls and floors wherever required complete all as specified and directed. 8 M&L for providingand fixing white vitreous china orrissa pattern WC, pan of size 580mm x 440 mm with integral type foot rests (Indian type WC pan) with 100mm sand cast iron P or S trap and 10 litre low level white PVC flushing cistern including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete includng cutting and making good the walls and floors wherever required complete all as specified and directed. 9 M&L for providing and fixingPVC connection 15mm nominal bore, 450 mm long pipe with PTMT nuts, collar and bush of approved and colourcomplete all as specified and directed. 10 M&L for providingand fixing White vitreous china flat back wash basin size 550mm x 400mm with CI brackets, 15mm CP brass pillar tap, 32mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and directed. 11 M&L for providingand fixing circular type 125mm nominal dia with 25mm waste hole PTMT grating of approved quality and colour complete all as specified and directed. 12 Dismantling 15 to 40mm dia GI pipe internal work exposed on wallsincluding stacking of dismantled pipes (within 50 metres lead) complete all as specified and directed. 13 M&L for providingand fixing GI pipes 15mm dia nominal bore complete with GI fittings and clamps i/c making good the walls etc concealed pipe incluindg painting with anti corrosive bitumastic paint cutting chases and making good the wall complete all as specified and directed. 14 M&L for providingand fixing 20mm dia nominal bore GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc complete all as specified and directed. 15 M&L for providingand fixing gun metal gate valve 20mm nominal bore with CI wheel of approved quality (screwed end) complete complete all as specified and directed. 16 M&L for providingand fixing 20mm nominal bore 120mm long PTMT ball cock(weighing not less than 198 gms) of approved quality, colour and make complete with epoxy coated aluminium rod with LP / HP HD plastic ball complete all as specified and directed. 17 M&L for providingand fixing PTMT soap dish Holder having length of 138mm , breadth 102mm, height of 75mm with concealed fittings arrangement, weight not less than 106 gmscomplete all as specified and directed. 18 M&L for providingand fixing75mmdia sand cast iron S&Strap of self cleansing design with screwed down or hinged grating with or without vent arm complete incluindg cost of cutting and making good the walls and floors complete all as specified and directed. 19 M&L for providingand fixing 600mm x 450 mm beveled edge mirror of superior glass ( of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete all as specified and directed. 20 M&L for providingand fixing CP brass15mm nominal dia single level telephonic wall mixer of approved quality & make complete all as specified and directed. 21 M&L for providingand fixing CP brass long nose bib cock 15mm nominal bore of approved quality conforming to IS standards and weighing not less 410 gms complete all as specified and directed. 22 M&L for providingand fixing CP brass angle valves 15mm nominal bore for basin, mixed, geyser, urinal etc points of approved quality conforming to IS 8931 complete all as specified and directed. 23 M&L for providingand fixing CP Brass stop cock (concealed) 15mm nominal dia of standard design and of approved make conforming to IS : 8931 complete all as specified and directed. 24 M&L for providingand fixing CP brass shower rose with 15 or 20mm inlet 100mm diameter complete all as specified and directed. 25 S&F in repairs PVC bathroom cabinet with looking mirror of size 500 mm x 400 mm x 140 mm complete all as directed (Cat No-554) complete all as specified and directed. 26 M&L for providingand fixing PTMT towel rail 600mm long with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality and colour complete all as specified and directed. 27 M&L for providingand fixing stainless steelA ISI -304 (18/8) Kitchen sink with drain board 510mm x 1040mm bowl depth 225mmas per IS : 13983 with CI brackets and tainless steel plug 40mm, incluidng painting of fittings and brackets cutting and makring good the walls wherever required complete all as specified and directed. 28 M&L for providingand fixing stainless steel plate rack of size 910mm x 750mm x 300mm (0.85mm thick) including taking down old rack of any description complete all as specified and directed. 29 Disconnecting damaged over head / terrace PVC water storage tank of any size from water supply line and removing from the terrace incluidng shifting at ground level complete all as specified and directed. 30 M&L for providingand placing on terrace (at all floor levels) polyethylene water storage tank, 1000 litres capacity IS: 12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed. 31 M&L for providingand placing on terrace ( at all floor levels) polyethylene water storage tank, 500 litres capacity IS: 12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed. 32 Demolishing cement concrete of any description by manually / mechanical means in sunken floors including disposal of materials within 50 metres complete all as specified and directed. 33 M&L for providingand laying cement concrete 1:5:10(1 cement : 5 manufacture sand : 10 graded stone aggregate 40mm nominal size)in retaining walls, return walls, including attached pilasters, columns, piers, abutments, pillars, posts, struts , buttresses, string or lacing courses, parapets, coping, bed blocks, plain blocks , plain windows sills, fillets, sunken floor etc up to floor five level excluding cost of centering complete all as specified and directed. 34 M&L for providingand fixing 40mm GI pipe spout to sunken floor and lowering to proper levelscomplete all as specified and directed. 35 M&L for rendering 10mm in CM 1:3overconcrete surfaces on RCC roof slab and sunken slabmixed with WPC @ 3% by weight of cement shall be carried out complete all as specified and directed.Note : WPC will be measured and paid under separate item. 36 Supply onlyintegral water proofingcompound complete all as specified and directed. 37 Dismantling old 75mm diameter of CI pipes including excavation and refilling trenches after taking out the pipes, breaking lead chauked joints, melting of lead and making into blocks including stacking of pipes at the site lead upto 50 metre complete all as specified and directed. 38 Dismantling old 100mm diameter of CI pipes including excavation and refilling trenches after taking out the pipes, breaking lead chauked joints, melting of lead and making into blocks including stacking of pipes at the site lead upto 50 metre complete all as specified and directed. 39 M&L for providingand fixingon wall face 110mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 type A incluidng jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion single socketed pipes complete all as specified and directed. 40 M&L for providingand fixingon wall face 75mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 type A incluidng jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion single socketed pipes complete all as specified and directed. 41 M&L for providingand fixing on wall face unplasticised - PVC moulded Bend 87.5° 110 mm bend for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed. 42 Dismantling 10mmupto 25mm thickness wooden boardings in lining of walls and partitions, cupboards excluding supporting members but including stacking within 50 metres lead. 43 M&L for providingand fixing 19mm thick both side balancing lamination factory made pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc including necessary nails, screws etc omplete all as specified and directed. 44 M&L for providingMS piano hinges of overall width 35mm, IS : 3818 finished with nickel plating and fixing with necessary screws etc complete all as specified and directed. 45 M&L for providingand fixing chromium plated brass 50mm cupboard or wardrobe knobs with nut complete all as specified and directed. 46 S&F 18mm thick plywood with PVC laminations for kitchen cabinet, cabinet shutters and front of drawers, duly fixed with with solvent adhesive, shaped to receive glass / steel baskets, fixed in position with and including provision of all necessary fixing arrangemens i.e., anchoring to walls with anchoring bolts of suitable length /screws as applicable, complete all as specified and directed. 47 M&L for providingand fixing ready made 304 grade stainless steel modular kitchen basket and accessories such as right angle basket ( plain cup & saucer, plant, partition, bottle rack, thali, Cutlery) kitchen utensil basket , Dinner set basket as per site requirement including finishing and fittings. the same shall be fixed with necessary stainless steel nuts 7 bolts, stainless steel screws & channel etc as complete all as specified and directed. 48 M&L for providingand fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500mm long with screws etc complete all as specified and directed. 49 M&L for providingand fixing stainless steel soft closing hinges at 0 degree hinges (Hydraulic type) of approved make/ brand to cupboard shutter with full threaded steel screws including making necessary recess in board and finished etc complete all as specified and directed. 50 M&L for providingand fixing 50mm bright finished brass cupboard knob of approved quality with necessary screws complete all as specified and directed. 51 M&L for providingand fixing 100mm stainless steel fancy handle of approved make fixed with SS screws etc complete all as specified and directed. 52 M&L for Preparation of new PVC surfaces and applying two coats of Deco paint of colour as directed / texture paint as directed, over a coat of primer and applying putty to make smooth surface where required complete all as specified and directed. 53 Dismantling doors, windows and clerestory windows (steel or wood) shutter of area not exceeding 3 Sqm including chowkhats, architrave, holdfasts etcand stacking within 50 metres lead complete all as specified and directed. 54 Dismantling doors, windows and clerestory windows (steel or wood) shutter of area exceeding 3 Sqm including chowkhats, architrave, holdfasts etcand stacking within 50 metres lead complete all as specified and directed. 55 Taking out doors, windows and clerestory window shutters ( steel or wood) of area not exceeding 3 Sqm including stacking within 50 metres lead, complete all as specified and directed. 56 Taking out existing wooden door shutter, repair by cutting, painting etc and refixing of repaired door shutter to existing door frames, including replacement of hinges with screw etc as required complete all as specified and directed. 57 M&L for providingwood work second class teak woork in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) complete all as specified and directed.. 58 M&L for providingand fixing pressed steel door frames of size 105mmx60mm (profile C) conforming to IS: 4531, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50mm x 25mm, or base ties of 1.60mm, pressed mild steel welded or rigidly fixed together by mechanical means, incluidng M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre- treatment of the surface complete all as specified and directed :-(i) Profile E fixing and adjustable lugs with split end tail to each jambs 59 M&L for providingand fixing pressed steel door frames of size 165x60mm (profile E)conforming to IS: 4531, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25mm, or base ties of 1.60mm, pressed mild steel welded or rigidly fixed together by mechanical means, incluidng M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre- treatment of the surface complete all as specified and directed :-(i) Profile E fixing and adjustable lugs with split end tail to each jambs 60 M&L for providingand fixing ISI marked 35mm thick including ISI marked stainless steel butt hinges with necessary screws flush door shutters conforming to IS : 2202 (Part -I) decorative type, core of block board construction with frame of Ist class hard wood and well matched teak 3 ply veneering with vertical graains or cross bands and face veneers on both faces of shutters complete all as specified and directed. 61 M&L for providingand fixing 35mm thick shutters of second class hard wood, kiln seasoned with ISI marked MS pressed butt hinges bright finished of required size,withwire gauge shutters using galvanised MS wire gauge of average width of aperature 1.4mm in both directions with wire of dia 0.63mm, for doors , windows and clerestory windows with hinges and necessary screws complete all as specified and directed. 62 M&L for providingand fixing aluminium handles 125mm, ISI marked, anodised ( anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete all as specified and directed. 63 M&L for providingand fixing ISI marked oxidised MS single acting spring hinges 125mm with necessary screws etc complete all as specified and directed. 64 M&L for providingand fixing aluminium sliding door bolts 300mm x 16mm, ISI marked anodised (anodise coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nut and screws etc complete all as specified and directed. 65 M&L for providingand fixing aluminium tower bolts 150mm x 10mm, ISI marked, anodised ( anodise coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc complete all as specified and directed. 66 M&L for providingand fixing aluminium Twin rubber stopper hanging floor door stopper, ISI marked, anodised ( anodise coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade , with necessary screws complete all as specified and directed. 67 M&L for providingand fixing bright finished 100mm mortice lock with 6 levers and a pair of handles of doors with necessary screws etc complete all as specified and directed. 68 M&L for providingand fixing oxidised MS hasp and staple (safety type) 115mm conforming to IS : 363 with necessary screws etc complete all as specified and directed. 69 M&L for providingand fixing factory made door frame ( single rebate ) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62mm width & 32mm thickness , frame will be mitred & jointed with self driven self tapping screws of size 38mm x 4mm & PVC solvent cement including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturers complete all as specified and directed. 70 M&L for providingand fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75mm x 30mm having wall thickness 5mm. The styles, top & bottom rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with MS tubes of size 33mm x 17mm x 1mm, painted with primer, all four corners of reinforcement to be welded or sealed. solid PVC extruded bidding ( push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mmPVC sheet as panel. The styles and rails will be mitred cut and joint with help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100mm x 30mm with wall thickness 5mm & 15mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturers specifications and direction of Engineer -in- Charge.(i)Decorative finish( both side wood grained finish) 71 Demolishing cement concrete of any description by manually / mechanical means including disposal of materials within 50 metres complete all as specified and directed. 72 M&L for providing 50mm thick plinth protectionof cement concrete 1:3:6 ( 1 cement : 3 coarse sandderived from natural sources : 6 graded stone aggregate 20mm nominall size derived from natural sources) laid over and including 75mm thick bed of dry brick ballast (40mm nominal size), well rammed and consolidated and grouted with fine sand, including necessary form work and excavation, levelling & dressing & finishing the top smooth complete all as specified and directed. 73 Cement concrete 1:2:4 ( 1 cement ; 2 coarse sand : 4 graded stone aggregte 40mm nominal size ) in pavements, platform for water tank , laid in required slope and camber in panels as required incluidng consolidation finishng and tamping complete all as specified and directed. 74 Demolishing brick work in cement mortarby manually / mechanical means includng stacking of serviceable materials and disposal of unserviceable materials within 50 metre lead, complete all as specified and directed. 75 M&L for Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 complete all as specified and directed. 76 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster includng disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed. 77 M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and finished the surface fair and even without using extra cement complete all as specified and directed. 78 M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces and finished the surface fair and even without using extra cement complete all as specified and directed. 79 M&L for 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on ceiling surface finished with a floating coat of neat cement and thick coat of lime wash on top of ceiling when dry for bearing of RCC slabs and beams complete all as specified and directed. 80 Taking down existing roof treatment of any position with bituminous felt including plaster / loose concrete and removing rubbish to a distance exceeding 100 m and not exc 250 m and roughing the surface of old concrete by picking, scraping, cleaning and washing down with water to remove all dust etc complete all as specified and directed. 81 Hacking of cement concrete roof flooring incluidng cleaning for surfaces etc incluidng brushing neat cement slurry to roofcomplete all as specified and directed. 82 M&L for rendering 10mm in CM 1:3overconcrete surfaces on RCC roof slab and parapets mixed with WPC @ 3% by weight of cement shall be carried out complete all as specified and directed.Note : WPC will be measured and paid under separate item. 83 (a) M&L for mechanical cleaning of surface to make it free from any bituminous residue/dirt, oil and grease etc complete all as specified and directed.(b) M&L for cracks treatment by cutting open cracks and cleaning it from dirt, loose materials etc and filling with polyurethane based sealant with and including application of PU based primer complete all as specified and directed.(c) M&L for applying water based polyurethane modified dispersion (single component cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of primer of same material after dilution of water at 50% or specific primer matching same material as per manufacturer specification and complete all as specified and directed.Properties of poly urethane based chemical shall confirm to following Technical Parameters: -(i) Highly elastic.(ii) UV resistance.(iii) Adhesion to concrete > 1N/Sqmm.(iv) Tensile strength not less than 2.0N/Sqmm for free film.(v) Elongation – not less than 300%(vi) Solid content by weight – not less that 60%.(vii) Air/water permeability BSEN 12390 at 5 bar-72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0mm.(viii) Accelerated weathering (ASTM 453): Pass 1000 hours.(ix) Reaction to fire – non inflammable.Notes: - 1.To be applied by the Rep of manufacturers authorized applicator only.Contractor has to provide manufacturer’s test certificate for the above mentioned Technical parameters and purchase Vouchers.2.Removal of existing treatment to be paid separately.3.Roof top to be ensured to avoid water ponding.4.For accessible terrace and inaccessible terrace, 300mm height of vertical surface/ parapet wall to be treated with same specification of slab.Make: Bostic, Berger, Fosroc, Sika, Asian or any other make approved by E-in-C’s Branch for PU based water proofing treatment. 84 M&L for providingand fixingsteel work in gratings, frames, guard bars, ladders, railing, brackets, purlings, gates and similar workswelded in built up sections / frames work, incluidng cutting, hoisting, fixing in position and applying priming coat of approved steel primer using structural steel as required complete all as specified and directed. 85 M&L for two coats of synthetic enamel paint on new steel surfaces over and incluidng a coat of red oxide primer of approved brand and manufacture of required colour to give an even shade complete all as specified and directed. 86 M&L for Preparation of old paintedsteel surfaces, over 10 cm width or girth, not otherwise described and applying one coat of aluminium paint(ordinary tint) complete all as specified and directed. 87 M&L for two coats of synthetic enamel paint on new wood surfaces over and incluidng a coat of pink primer of approved brand and manufacture to give an even shade complete all as specified and directed. 88 M&L for Painting to woodensurfaceswith one coat of synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old surfaces,complete all as specified and directed. 89 M&L for Distempring two coats on new workwith 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams / litre of approved brand and manufacture of required shade and colour over and including one coat of water thinnable cement primer of approved brand and manufacture on wall surface complete all as specified and directed. 90 M&L for preparation of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. 91 M&L for One coat of distempering on old work (wall/ceiling) with 1st qualityacrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand over and includinga coat of water thinnable cement primerand manufacturer to give an even shade complete all as specified and directed. 92 M&L for Finishing wall New work (with two coats of acrylic emulsion paint) applied @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm with 100 % premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted ) with silicon additives complete all as specified and directed. 93 M&L for Finishing wall with two coats Acrylic smooth exterior paint on old work applied @ 1.67 ltr/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 kg/ 10 Sqm of required shade and 1mm thick wall care putty complete all as specified and directed. 94 M&L for providingand fixing8mm dia C.P / S.S. jet with flexible tube upto 1 metre long with S.S triangular plate to Eureopean type W.C of quality and make complete all as specified and directed. 95 M&L for providingand fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made:- (i)Three track three panels sliding window with fly proof SS wire mesh (Two nos.glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm 96 M&L for providingand fixing factory made uPVC colour casement / (Openable) glazed window / ventilators comprising of uPVC multi chambered trame, sash and mullion ( where ever required) extruded profile duly reinforced with 1.60 + 0.2mm thick galvanised mild steel section made from roll forming process of required length ( shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel ( SS 304 grade) friction hinges, zinc alloy ( while powder coated ) casement handles, GI fasteners 100 x 8mm size for fixing frame to finished wall, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with eather proof silicon sealant over bracker rod of required size and approved quality complete all as specified and directed.(i) Casement window single paanel with SS fricition hinges ( 300 x 19 x 1.9mm) made of ( small series) frame 47 x 50mm & sash 47 x 68mm both having wall thickness of 1.9 + 0.2mm and single glass pane glazing beads of appropriate dimension 97 Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed. 98 M&L for Point wiring complete with 1.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 V grade drawn through and including 20mm dia PVC conduit, medium grade, and conduit accessories, concealed in thewalls/ceiling and terminated to sunkenmetal box of modular typeand including provision of GImodularboxISI marked in the wallssuitable for modular switches, sockets etc., and including modular white plates for fixing modular switches, sockets / regulators etc., including 1.5sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly with brass screws, washers, copper lugs etc., complete all as specified and directed for one light / fan point /bell point/ceiling fan point/exhaust pointcontrolled by one, one-way switch 5 Amp complete all as specified and directed. 99 All as per Sl Item No. 98 here-in-before but for one 3-pin 5/6Amp socket outlet point on independent board controlled by one one-way 5/6Amp switch, complete all as specified and directed. 100 All as per Sl. Item No. 98 here-in-before but controlled by two,two way 6Amps switches complete all as specified and directed. 101 All as per Sl. Item No. 98 here-in-before but for one 3-pin 5/6Amp socket outlet point on same board controlled by one one-way 5/6Amp switch, complete all as specified and directed. 102 M&L for Point wiring complete with 2.5 sq.mm PVC insulated unsheathed multi-stranded FRLScopper conductor 1100 Volts grade, ISI marked, drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories,concealed in thewalls/ceiling and terminated to sunken box of modular typeand including provision of GImodularboxISI marked in the wallssuitable for modular switches, sockets etc., and including modular white plates for fixing modular switches, sockets / regulators etc., including 2.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly with brass screws, washers, copper lugs etc., complete all as specified and directed for 3-pin 15/16 Amp socket outlet point on independent board, complete all as specified and directed. 103 S&F modular switchone way 6 Amps 1 modulecomplete all as specified and directed. 104 S&F modular switchone way 16 Amps 1 module complete all as specified and directed. 105 S&F modular switchtwoway 6 Amps 1 module complete all as specified and directed. 106 S&F modular fan step type regular two modulecomplete all as specified and directed. 107 S&F modular socket out let 6 Amps 230 Volts AC 3 pin multipurpose type complete all as specified and directed. 108 S&F modular socket out let 6/16 Amps multipurpose complete all as specified and directed. 109 S&FModular Bell push6 Ampsone module complete all as specified and directed. 110 S&F Lamp holders insulated body card grip pattern suitable for batten/angular complete all as specified and directed. 111 S&F Ceiling rose two to three terminal surface backallite type AC 50Hz 230 volts complete all as specified and directed. 112 M&L for Bell electric AC. 230 V fish type, calling bell including taking down old unserviceable one complete 113 Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.including connecting up with twin coreflexible copper conductor cable with suitable size complete all as specified and directed. 114 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V,AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable sizecomplete all as specified and directed. 115 Supply and fixing LED street light fitting 30 Watt 230 V,AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. 116 Supply and fixing 240V, 10 KA C curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amps, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 117 Supply and fixing 415V 10 KA C curve miniature circuit breaker (MCB) of TPN 40-100 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. 118 Supply and fixing sheet metal enclosure MCCB DB TPN double door type AC 415 V 4 way with 200 Amps rated bus bar, vertical typewith MCCB 100A 3 Pole 10 KA as incomer flush to wallincluding taking down old one complete and making good of distructed surface including taking down old one complete all as specified and directed. 119 Supply and fixing sheet metal enclosure MCCB DB TPN double door type AC 415 V 8 way with 200 Amps rated bus bar, vertical typewith MCCB 100A 3 Pole 10 KA as incomer flush to wallincluding taking dwon old one complet and making good of distructed surface including taking down old one complete all as specified and directed. 120 Supply and fixing sheet metal enclosure MCB DB SPN double door type AC 240 V 12 way with 200 Amps rated bus bar,including taking dwon old one complet and making good of distructed surface including taking down old one complete all as specified and directed. 121 M&L for sub main wiring complete with 2 runs of 10 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DBsincluding provision of 1 run of 10 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down old u/s one complete all as specified and directed. 122 Taking down ceiling fan/ exhaust fan/ Wall mounting Fan of any make, sweep and dismantling, cleaningand M&L for providingtwo coats of synthetic enamelpaint of existing colour and refixing to its existing place including connections with new flexible cable 3 core copper conductorincluding applying two coats of ivory paint complete.For Ceiling fan - adjustment for M&L for providingnew down rod including new canopy, clamp, rubber reel, complete all as specified and directed. 123 Taking down carefully existing serviceable electric meters single phase/three phase and and refixing the same its original location after completion of building renovation work complete all as specified and directed. 124 M&L for Earthing complete with GI earth plate electrode 600mmx600mmx6mm buried directly in ground vertically to a depth of not less than 2.25m below ground level than 1.5m below ground level connected to GI earth wire 4mm dia by means of bolts washers etc made out of GI earth wire will be protected by galvanized iron pipe medium grade 15mm bore up to main distribution board/main switch including necessary excavation and earth work PCC 1:3:6 type C1 (using 20mm graded stone aggregate) RCC cover 1:2:4 type B1 including necessary reinforcement etc complete all as shown on electric plate No.3, complete all as specified and directed. 125 Earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required GI Wire 4 mm as earthing lead complete all as specified and directed. 126 Taking down carefully exsisting geyser and refixing the same in its original position after completion of building renovation work all as directed, incuding any repairs complete all as specified and directed. 127 S&F exhaust fan steel body AC single phase 230V of size 300mm sweep with blades, frames and louvers complete all as specified and directed. 128 S&F electric water heaters storage type steel body with copper innertank and heating element upto 2KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. 129 S&F Metal clad AC earth plug and socket with sheet metal enclosure with MCB SP 20A complete all as specified and directed. 130 S&F Rigid non metallic PVCconduit,20mm external dia,exclusive of boxes(junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, locknut, saddles, pipe hooks etc, complete all as specified and directed. 131 M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DBsincluding provision of 1 run of 6 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down old u/s one complete all as specified and directed.. 132 Supply and fixing two module telephone socket and TV socket complete all as specified and directed. 133 Supply and laying GI tubing medium grade with fittings suc as tees, bends, union, elbows, nipples, collars, sockets, reducer, clamps etc, fixed in wall celing laid in trenches etccomplete all as specified and directed for the following sizes :- 134 50mm dia 135 25mm dia 136 20mm dia 137 15mm dia 138 M&L for construction of Valve chamber built in brick masonry of size 450mmx450mmx450mm in cement motar (1:6) including base concrete PCC 1:4:8 mix type D2, 100mm thick 230mm thick brick work 15mm thick plastering with cement mortar (1:4) internally & externally including provision of 3 mm thick MS sheet cover fixed with 40mmx40mmx6mm angle iron embedded in PCC 1:2:4 mix type B1 coping 100mm thick including painting to sheet & iron work with two coats of synthetic enamal paint over one coat of red oxide primer and necessary earth work and excavation in any type of strata complete with locking arragngement lifting handle complete all as specified and directed. 139 S&F50mm gun metal, globe valves with iron wheel head, screwed both end for iron pipe and fixed etc complete all as specified and directed. 140 S&F25mm gun metal, globe valves with iron wheel head, screwed both end for iron pipe and fixed etc complete all as specified and directed. 141 S&F20mm gun metal, globe valves with iron wheel head, screwed both end for iron pipe and fixed etc complete all as specified and directed. 142 Supply and fix 15mm brass valves of approved high quality or low pressure with plastic floats complete all as specified and directed. 143 Cutting GI pipe of 50mm dia in postin of suitable new lee of 50mm for taking branch connection complete all as specified and directed. 144 M&L for XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm, 3 1/2 core complete all as specified and directed. 145 M&L for XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm, 3 1/2 core complete all as specified and directed. 146 M&L for XLPE insulated ,armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm, 3 1/2 core complete all as specified and directed. 147 Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as specified and directed. 148 Returning, filling in soils including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick, complete all as directed 149 Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed 150 Supply and spread clean river sand as cable cushioning for protection of cable to be laid in trenches, complete all as specified and directed. 151 M&L for Brick protection with common burnt bricks, sub classB of size 230mmx115mmx75mm for cable protection complete all as specified and directed. 152 Supply and lay GI tubing 80 mm dia, light grade for cable protection at road crossing / on poles and tubing sealed at both ends after laying the cables complete all as specified and directed.
|
